To zoom in, use the keyboard to focus on the arrow icon within the product image. Once it receives focus, use the arrow keys on the keyboard to move and position the product image. The zoom feature provides no benefit to users who are blind.
Using 360° Viewing:
Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
Zoom In: Double click on image.
Zoom Out/Reset: Put photo at full zoom & then double click.
Simple Green® pressure washer chemical is a specially formulated heavy-duty cleaner designed to remove tough grease and grime deposits from a variety of nonporous surfaces. Use manually or with pressure washing equipment to remove: oils, grease, soot and ash, exhaust, sap, pollen, stains caused by mold and mildew, road tar, and other tough soils. Its inherently biodegradable formula is safe for lawns and pressure washing equipment alike.Directions for use:BEFORE USE1) Before you begin-always wear eye protection.2) Saturate plants, shrubs and grass with water.3) Keep others and animals away from work site.4) Test pressure washer for surface compatibility, with and without the cleaner, in an inconspicuous area. Rinse and allow surface to dry before proceeding.5) Do not allow product to dry on surface before rinsing.6) Do not allow contact on any deteriorated or severely oxidized painted, sealed, or stained surfaces unless you intend to refinish.7) Pressure washing alone may remove old paint and stains and should be tested on surface prior to cleaning.8) Product may not be compatible with all asphalt sealers.9) For vertical surfaces, solution should be applied working from the bottom up and rinsed using fresh water from the top down to prevent streaking.Application Directions:1) Put pressure washer siphon tube into solution.2) Use low-pressure spray nozzle to apply solution to surface.3) Remove the siphon tube from the container.4) Rinse with a high-pressure nozzle.5) Saturate plants, shrubs and grass with water after cleaning.6) Before storage, rinse pressure washer parts thoroughly. For extremely light soils, pre-dilute this product 50/50 with water and follow the instructions above.Manual Cleaning:1) Dilute 1-measure of Simple Green with 10-measures of ambient water (Example: In a clean bucket, add 2 cups of Simple Green to 1 gallon + 1 quart of water).2) Clean in sections using a soft bristle brush.3) Allow the cleaning solution to remain on the surface for several minutes, but not to dry.4) Rinse with a garden hose, at highest pressure possible.5) Move to a new section and repeat.
For Use OnATVs, Bicycles, Boats, Brick and Block Walls, Campers, Construction and Landscaping Equipment, Dirt Bikes, Driveways, Motorcycles, Outdoor Furniture, RVs, Sheds and Other Outdoor Surfaces Such as Patios, Structures and More
RemovesExhaust, Mold and Mildew Stains, Oils, Grease, Soot and Ash, Other Tough Soils, Pollen, Road Tar, Sap