DV
HANDI-FLOW

Multipurpose/Construction Insulating Spray Foam Sealant, 37.8 lb. Aerosol Can, Yellow/White

  • Item # 3EKY6
  • My Part #
  • Mfr. Model # P10742G
  • Catalog Page # N/A
  • UNSPSC # 31201608
Multipurpose/Construction Insulating Spray Foam Sealant, 37.8 lb. Aerosol Can, Yellow/White close
close

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.

CAD Downloads

Product is discontinued

No alternate products can be found at this time.

See Other Options:

Shop All Spray Foam Sealants

Product Details

Handi-Flow® pour-in-place foam is engineered with a slower cure time than spray foams, allowing free flow throughout the cavity to fill the entire void. Adds structural support, provides buoyancy, prevents vibrations, and deadens sound.

View More

Technical Specs

  • Application Multipurpose
  • Item Insulating Spray Foam Sealant
  • Number of Components 2
  • Size 37.8 lb.
  • Container Type Aerosol Can
  • Indoor/Outdoor Indoor,Outdoor
  • Color Yellow/White
  • Insulation Value R-5 to 6
  • Expansion Ratio 4:1
  • Coverage 14 cu. ft.
  • Begins to Harden 2 to 4 min.
  • Full Cure 1 hr.
  • Application Temp. Range Not Specified
  • Performance Temp. Range -200 Degrees to 200 Degrees F
  • Flash Point 200 Degrees F
  • Specific Gravity 1.2
  • Substrates All Except Polyethylene, Polypropylene, Silicone, Oils, Greases, Mold Release Agents And Similar Materials
  • Standards UL-94 Rated
  • Includes 9-1/2 ft. Hose and Initial 8-pk of Nozzles
  • Item Insulating Spray Foam Sealant
  • Number of Components 2
  • Container Type Aerosol Can
  • Color Yellow/White
  • Expansion Ratio 4:1
  • Begins to Harden 2 to 4 min.
  • Full Cure 1 hr.
  • Application Temp. Range Not Specified
  • Performance Temp. Range -200 Degrees to 200 Degrees F
  • Begins to Harden 2 to 4 min.
  • Full Cure 1 hr.
  • Performance Temp. Range -200 Degrees to 200 Degrees F
  • Specific Gravity 1.2
  • Substrates All Except Polyethylene, Polypropylene, Silicone, Oils, Greases, Mold Release Agents And Similar Materials
  • Includes 9-1/2 ft. Hose and Initial 8-pk of Nozzles
  • Green Environmental Attribute VOC Levels Meet SCAQMD Requirements
How can we improve our Technical Specifications?

Compliance and Restrictions

  • Hazardous material - Non-Flammable Gas

  • - This item has been designated by the manufacturer as an environmentally preferable product (EPP) because this item is VOC Levels Meet SCAQMD Requirements.

Related Products