Navigation Menu New

Access My Account, Order History, Lists and more here.

2NVC3 WE0712H UNSPSC # 40151510

Tap image to zoom.

Roll over image to zoom.

Effluent Pump, HP 3/4, 240V AC, Continuous Duty Cycle, Max. Head 67.0 ft

  • Item # 2NVC3
  • Mfr. Model # WE0712H
  • UNSPSC # 40151510
  • Catalog Page # 2622 2622
Country of Origin USA. Country of Origin is subject to change.

These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.

Technical Specs

  • Item Effluent Pump
  • HP 3/4
  • Rated Voltage 240V AC
  • Hz 60 Hz
  • Phase - Pumps 1
  • Amps 10
  • Body Material Cast Iron
  • Impeller Material Cast Iron
  • Shaft Seal Material - Pumps Nitrile Rubber, Silicon Carbide, Stainless Steel
  • Switch Actuation No Switch Included
  • Switch Electrical Connection No Switch Included
  • Flow Rate @ 10 Ft. of Head 93.0 gpm
  • Flow Rate @ 15 Ft. of Head 89.0 gpm
  • Flow Rate @ 20 Ft. of Head 83.0 gpm
  • Flow Rate @ 40 Ft. of Head 45.0 gpm
  • Flow Rate @ 60 Ft. of Head 10.0 gpm
  • Max. Head 67.0 ft
  • Min. Sump Pit Dia. 18 in
  • Minimum Water Depth 18 in
  • Body Dia. 11 3/4 in
  • Width at Widest Point 8 1/2 in
  • Overall Height 16 in
  • Cord Length 20 ft
  • Discharge 2 in FNPT
  • Max. Diameter Solids 3/4 in
  • Max. Liquid Temp. 140 Degrees F
  • Duty Cycle Continuous
  • Alarm Included No
  • RPM 3,450 RPM
  • Thermal Protection Thermal Protection
  • Agency Compliance CSA C22.2 108, UL 778
  • Nominal Voltage 220V AC

These single-phase 200 to 240V effluent pumps use a higher voltage that allows for larger motors that require less current than lower-voltage motors. They are used to drain treated water containing small solids from septic tanks and out to a drain field.

Back to Top