Navigation Menu New

Access My Account, Order History, Lists and more here.

12U417 DL34-01 UNSPSC # 41111938

Tap image to zoom.

Roll over image to zoom.

Polycarbonate Noncontact Ultrasonic Level Sensor, 18 ft Range

  • Item # 12U417
  • Mfr. Model # DL34-01
  • UNSPSC # 41111938
  • Catalog Page # 2680 2680
Country of Origin USA. Country of Origin is subject to change.

Allows simple configuration with WebCal software and requires no more target calibration, this FLOWLINE EchoPod® noncontact ultrasonic level sensor is a general-purpose ultrasonic level switch, controller and transmitter that provides a loop powered 4-20 mA output and 4 SPST 60 VA relays. Model has 4-20 mA output that can be used to provide the proportional level of liquid in a tank or vessel. Sensor can be used to control multiple combinations of pumps, valves, and/or alarms. The signal can be connected to most devices that accept a loop powered 4-20 mA signal or relay output, such as a PLC, SCADA, DCS, display, or controller.

Technical Specs

  • Item Noncontact Ultrasonic Level Sensor
  • Classification General Purpose
  • Range 18 ft
  • Accuracy +/-0.2% of Range
  • Resolution 0.079 in
  • Dead Band 8 in
  • Beam Width 3 in
  • Configuration WebCal
  • Input Voltage 24V DC (loop)
  • Output 4 to 20mA and (4) SPST Relays
  • Temp. Range 20 Degrees to 140 Degrees F
  • Max. Pressure 30 psi
  • Enclosure Rating Type 6P
  • Enclosure Material Polycarbonate
  • Material PVDF
  • Gasket Material Viton
  • Mounting 2 in NPT
  • Display None
  • Standards CE, cFMus, RoHS
  • Overall Length 3.1 in
  • Width 3.1
  • Height 6.5 in

Allows simple configuration with WebCal software and requires no more target calibration, this FLOWLINE EchoPod® noncontact ultrasonic level sensor is a general-purpose ultrasonic level switch, controller and transmitter that provides a loop powered 4-20 mA output and 4 SPST 60 VA relays. Model has 4-20 mA output that can be used to provide the proportional level of liquid in a tank or vessel. Sensor can be used to control multiple combinations of pumps, valves, and/or alarms. The signal can be connected to most devices that accept a loop powered 4-20 mA signal or relay output, such as a PLC, SCADA, DCS, display, or controller.

Back to Top