Navigation Menu New

Access My Account, Order History, Lists and more here.

3Z848 101691G-A UNSPSC # 27131507

Abrasive Blast Cabinet: 33 in Overall Ht, 19 in Overall Wd, 17 in Overall Dp

  • Item # 3Z848
  • Mfr. Model # 101691G-A
  • UNSPSC # 27131507
  • Catalog Page # 2402 2402
Country of Origin USA. Country of Origin is subject to change.

Constructed with 14-ga. steel bodies and 11-ga. steel legs, with spring-loaded trap door attached to the bottom of the hopper. Maintain a minimum 45° angle to insure that abrasive will flow to the bottom of the hopper and into the delivery system.

Tap image to zoom.

Roll over image to zoom.

Abrasive Blast Cabinet: 33 in Overall Ht, 19 in Overall Wd, 17 in Overall Dp

  • Item # 3Z848
  • Mfr. Model # 101691G-A
  • UNSPSC # 27131507
  • Catalog Page # 2402 2402
Country of Origin USA. Country of Origin is subject to change.

Constructed with 14-ga. steel bodies and 11-ga. steel legs, with spring-loaded trap door attached to the bottom of the hopper. Maintain a minimum 45° angle to insure that abrasive will flow to the bottom of the hopper and into the delivery system.

Technical Specs

  • Item Abrasive Blast Cabinet
  • Blast Cabinet Grouping Abrasive Blast Cabinet
  • Cabinet Design Benchtop
  • Feed Type Siphon
  • Work Area Dimensions 16 in x 18 in x 16 in
  • Work Area Height 16 in
  • Work Area Width 18 in
  • Work Area Depth 16 in
  • Overall Dimensions 33 in x 19 in x 17 in
  • Overall Height 33 in
  • Overall Width 19 in
  • Overall Depth 17 in
  • Top Opening 18 in x 12 in
  • Window 6 in x 12 in
  • Min. CFM @ 80 PSI 12 cfm
  • Side Opening No Side Opening
  • Cabinet Material Steel
  • Includes Carbide Air Jet, Carbide Nozzle, Foot Pedal Actuator and Door Safety Switch, Regulator and Gauge
  • Features Aluminum Oxide, Glass Beads, Nutshells and Fine Metal Grit
  • Application Scale Removal as well as for Deburring and Peening, To Prepare Surfaces for Plating

Constructed with 14-ga. steel bodies and 11-ga. steel legs, with spring-loaded trap door attached to the bottom of the hopper. Maintain a minimum 45° angle to insure that abrasive will flow to the bottom of the hopper and into the delivery system.

Back to Top