Navigation Menu New

Access My Account, Order History, Lists and more here.

7AA07 NV2IG15BSG UNSPSC # 39111902

Incandescent Light Fixture, Dimmable No, 120 to 277V AC, For Max. Bulb Wattage 150 W

  • Item # 7AA07
  • Mfr. Model # NV2IG15BSG
  • UNSPSC # 39111902
  • Catalog Page # 449 449
Country of Origin Varies. Country of Origin is subject to change.

These Class I, II, and III fixtures illuminate Division 2 hazardous locations where flammable gases or vapors, combustible dusts, and/or ignitable fibers or flyings are normally confined or not present in ignitable concentrations. Their group ratings designate use in locations with specific types of gas, vapor, or dust. They prevent arcs or sparks within the fixture from igniting gases, vapors, dusts, fibers, or flyings on or near the fixture.brbrFlammable gases and vapors are Class I hazards commonly found in petroleum refineries, fuel dispensaries, sewage treatment plants, and processes using chemicals, paints, coatings, or sealants. Combustible dusts are Class II hazards commonly found in pharmaceutical factories, coal-handling plants, grain elevators, and plants processing flour, feed, or powder. Ignitable fibers and flyings are Class III hazards commonly found in textile mills, lumber mills, and other plants with airborne fibers or sawdust.

Tap image to zoom.

Roll over image to zoom.

Incandescent Light Fixture, Dimmable No, 120 to 277V AC, For Max. Bulb Wattage 150 W

  • Item # 7AA07
  • Mfr. Model # NV2IG15BSG
  • UNSPSC # 39111902
  • Catalog Page # 449 449
Country of Origin Varies. Country of Origin is subject to change.

These Class I, II, and III fixtures illuminate Division 2 hazardous locations where flammable gases or vapors, combustible dusts, and/or ignitable fibers or flyings are normally confined or not present in ignitable concentrations. Their group ratings designate use in locations with specific types of gas, vapor, or dust. They prevent arcs or sparks within the fixture from igniting gases, vapors, dusts, fibers, or flyings on or near the fixture.brbrFlammable gases and vapors are Class I hazards commonly found in petroleum refineries, fuel dispensaries, sewage treatment plants, and processes using chemicals, paints, coatings, or sealants. Combustible dusts are Class II hazards commonly found in pharmaceutical factories, coal-handling plants, grain elevators, and plants processing flour, feed, or powder. Ignitable fibers and flyings are Class III hazards commonly found in textile mills, lumber mills, and other plants with airborne fibers or sawdust.

Technical Specs

  • Item Incandescent Light Fixture
  • Dimmable No
  • Emergency Battery Backup No
  • Fixture Voltage 120 to 277V AC
  • For Max. Bulb Wattage 150 W
  • For Number of Bulbs 1
  • Lamp Watts - Fixtures 150.0
  • Lighting Technology Incandescent
  • Lumens 2,087 lm
  • Flasher Strobe Color Not Applicable
  • Overall Height 2 1/4 in
  • Overall Length 4 5/8 in
  • Overall Width 4 5/8 in
  • Ambient Temp. Range -40 Degrees to 104 Degrees F
  • Color Temperature Lamp Dependent
  • Fixture Ballast Type Electronic
  • For Bulb Base Type Medium
  • For Bulb Shape A19/A21
  • For Bulb Type Incandescent
  • Ingress Protection Rating 66
  • Lamp Type Medium Base
  • CA Title 24 Compliant No
  • Hazard Classification Class I/Division 2, Class II/Division 2, Class III
  • Housing Color Gray
  • Housing Finish Powder Epoxy Paint
  • Housing Material Polyester
  • Includes Clear Globe, Guard
  • Lumens Range 2,000 to 3,999 lm
  • Lumens per Watt 13 lm/W
  • Mounting Style Wall
  • Lamp Watts 150 W
  • Max. Fixture Wattage 150 W
  • Max. Ambient Temp. 104 Degrees F
  • Min. Ambient Temp. -40 Degrees F
  • Mounting Location Wall
  • Nominal Size - Fixtures 1/2 ft x 1/2 ft
  • Number of Ballasts 1
  • Safety Rating Class I, Division 2, Groups A, B, C, D, Class II, Groups F, G, Class l, Groups llC, llB, llA, Class III, Zone 2
  • Series NV2
  • Standards ABS Approved, NEMA 3, NEMA 4, NEMA 4X
  • Temperature Code T2B
  • UL/CSA/ETL Listed CSA US Certified, UL Marine Rated

These Class I, II, and III fixtures illuminate Division 2 hazardous locations where flammable gases or vapors, combustible dusts, and/or ignitable fibers or flyings are normally confined or not present in ignitable concentrations. Their group ratings designate use in locations with specific types of gas, vapor, or dust. They prevent arcs or sparks within the fixture from igniting gases, vapors, dusts, fibers, or flyings on or near the fixture.brbrFlammable gases and vapors are Class I hazards commonly found in petroleum refineries, fuel dispensaries, sewage treatment plants, and processes using chemicals, paints, coatings, or sealants. Combustible dusts are Class II hazards commonly found in pharmaceutical factories, coal-handling plants, grain elevators, and plants processing flour, feed, or powder. Ignitable fibers and flyings are Class III hazards commonly found in textile mills, lumber mills, and other plants with airborne fibers or sawdust.

Back to Top