Navigation Menu New

Access My Account, Order History, Lists and more here.

3XH47 21180 UNSPSC # 31201601

3M

1 qt. Nonflammable, Water Based Contact Adhesive, Neutral

  • Item # 3XH47
  • Mfr. Model # 21180
  • UNSPSC # 31201601
  • Catalog Page # 2228 2228
Country of Origin USA. Country of Origin is subject to change.

3M™ Fastbond™ Contact Adhesive 30-NF is a high water-dispersed sprayable contact adhesive for high immediate bond strength and long bonding range. Neutral adhesive dries to clear. Nonflammable in wet state. Post-formable and heat resistant. Coverage (@ 3 g. per ft. 2 g. dry wt.): 680 sq. ft. per gal. Coverage is dependent upon porosity of the substrate and the method by which the adhesive is applied. Use 2.5-3.5 g. per ft. 2 g. of dry adhesive per surface for wood, particle board and high-pressure laminates with the adhesive applied by spray or roller. More adhesive (lower coverage) is recommended if very soft wood, fabrics, foams, etc. are to be bonded, or if the adhesive is applied by brushing.

Tap image to zoom.

Roll over image to zoom.

3M

1 qt. Nonflammable, Water Based Contact Adhesive, Neutral

  • Item # 3XH47
  • Mfr. Model # 21180
  • UNSPSC # 31201601
  • Catalog Page # 2228 2228
Country of Origin USA. Country of Origin is subject to change.

3M™ Fastbond™ Contact Adhesive 30-NF is a high water-dispersed sprayable contact adhesive for high immediate bond strength and long bonding range. Neutral adhesive dries to clear. Nonflammable in wet state. Post-formable and heat resistant. Coverage (@ 3 g. per ft. 2 g. dry wt.): 680 sq. ft. per gal. Coverage is dependent upon porosity of the substrate and the method by which the adhesive is applied. Use 2.5-3.5 g. per ft. 2 g. of dry adhesive per surface for wood, particle board and high-pressure laminates with the adhesive applied by spray or roller. More adhesive (lower coverage) is recommended if very soft wood, fabrics, foams, etc. are to be bonded, or if the adhesive is applied by brushing.

Technical Specs

  • Item Contact Adhesive
  • Materials Bonded Foam, Laminate, Plastic, Wood
  • Flammable/Non Flammable Non-Flammable
  • Application Method - Adhesives Brush On, Roll On
  • Container Type - Adhesives Jug
  • Container Size - Adhesives 1 qt
  • Adhesive Color Neutral
  • Functional Cure 24 Hrs.
  • Work Life Up to 4 Hrs.
  • Begins to Harden Up to 4 hr
  • Temp. Range (F) -40 to 225
  • Characteristics Water Dispersed, High Strength Contact Adhesive Changes Color from Blue to Green When Dry, Apply with Spray, Roller, Brush, Non-flammable in the Wet State, Low VOC Content
  • Application Canvas, Formed plastics, Plastic laminate, Plywood, Wood, Wood veneer
  • Standards MIL-A-24179-A
  • Green Environmental Attribute Does Not Contain Methylene Chloride, Meets SCAQMD Requirements
  • Green Certification or Other Recognition GREENGUARD(R) Certified

3M™ Fastbond™ Contact Adhesive 30-NF is a high water-dispersed sprayable contact adhesive for high immediate bond strength and long bonding range. Neutral adhesive dries to clear. Nonflammable in wet state. Post-formable and heat resistant. Coverage (@ 3 g. per ft. 2 g. dry wt.): 680 sq. ft. per gal. Coverage is dependent upon porosity of the substrate and the method by which the adhesive is applied. Use 2.5-3.5 g. per ft. 2 g. of dry adhesive per surface for wood, particle board and high-pressure laminates with the adhesive applied by spray or roller. More adhesive (lower coverage) is recommended if very soft wood, fabrics, foams, etc. are to be bonded, or if the adhesive is applied by brushing.

Compliance and Restrictions

  • Safety Data Sheet (SDS) Available.
  • Green Product -This item has been designated by the manufacturer as an environmentally preferable product (EPP) because this item is GREENGUARD(R) Certified.
Back to Top