Sorry, we’ve encountered a problem displaying product pricing. Please Refresh the page.

WIDIA HANITA

116 results found that include 3,136 Products
  • FILTER
  • SORT
Show All Selected Filters Show Less Selected Filters
  • 4-Flute General Purpose Finishing TiAlN-Coated Carbide Ball End Mills

    WIDIA HANITA

    4-Flute General Purpose Finishing TiAlN-Coated Carbide Ball End Mills

    Multiple items available103

    N/A

  • About these products
    Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.
    4-Flute General Purpose Finishing TiAlN-Coated Carbide Ball End Mills
  • High-Performance Roughing/Finishing AlTiN-Coated Carbide Square End Mills

    WIDIA HANITA

    High-Performance Roughing/Finishing AlTiN-Coated Carbide Square End Mills

    Multiple items available139

    N/A

  • About these products
    The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.
    High-Performance Roughing/Finishing AlTiN-Coated Carbide Square End Mills
  • 4-Flute General Purpose Finishing TiAlN-Coated Fractional-Inch Carbide Square End Mills

    WIDIA HANITA

    4-Flute General Purpose Finishing TiAlN-Coated Fractional-Inch Carbide Square End Mills

    Multiple items available88

    N/A

  • About these products
    These end mills come in standard sizes expressed in fractional inches. Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.
    4-Flute General Purpose Finishing TiAlN-Coated Fractional-Inch Carbide Square End Mills
  • 4-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Up to 1/2" Shank

    WIDIA HANITA

    4-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Up to 1/2" Shank

    Multiple items available30

    N/A

  • About these products
    These end mills come in standard sizes expressed in fractional inches and have shank sizes that are 1/2" or smaller. Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes.
    4-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Up to 1/2" Shank
  • 2-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Up to 1/2" Shank

    WIDIA HANITA

    2-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Up to 1/2" Shank

    Multiple items available84

    N/A

  • About these products
    These end mills come in standard sizes expressed in fractional inches and have shank sizes that are 1/2" or smaller. Two-flute end mills help maximize chip clearance.
    2-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Up to 1/2" Shank
  • High-Performance Finishing AlTiN-Coated Fractional-Inch Carbide Corner-Radius End Mills with Up to 1/2" Shank

    WIDIA HANITA

    High-Performance Finishing AlTiN-Coated Fractional-Inch Carbide Corner-Radius End Mills with Up to 1/2" Shank

    Multiple items available142

    N/A

  • About these products
    These end mills come in standard sizes expressed in fractional inches and have a shank size that is 1/2" or smaller. The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.
    High-Performance Finishing AlTiN-Coated Fractional-Inch Carbide Corner-Radius End Mills with Up to 1/2" Shank
  • 4-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Greater Than 1/2" Shank

    WIDIA HANITA

    4-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Greater Than 1/2" Shank

    Multiple items available36

    N/A

  • About these products
    These end mills come in standard sizes expressed in fractional inches and have shank sizes that are larger than 1/2". Four-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes.
    4-Flute General Purpose Finishing Bright Finish Fractional-Inch Carbide Square End Mills with Greater Than 1/2" Shank
  • 3-Flute General Purpose Finishing Bright Finish Carbide Square End Mills

    WIDIA HANITA

    3-Flute General Purpose Finishing Bright Finish Carbide Square End Mills

    Multiple items available123

    N/A

  • About these products
    Three-flute end mills clear chips more quickly than end mills with more flutes and allow for higher feed rates than end mills with fewer flutes. They also typically have larger cores and are less prone to breaking than end mills with fewer flutes.
    3-Flute General Purpose Finishing Bright Finish Carbide Square End Mills
  • 2-Flute General Purpose Finishing TiAlN-Coated Fractional-Inch Carbide Square End Mills

    WIDIA HANITA

    2-Flute General Purpose Finishing TiAlN-Coated Fractional-Inch Carbide Square End Mills

    Multiple items available82

    N/A

  • About these products
    These end mills come in standard sizes expressed in fractional inches. Two-flute end mills help maximize chip clearance. The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.
    2-Flute General Purpose Finishing TiAlN-Coated Fractional-Inch Carbide Square End Mills
  • Miniature General Purpose Finishing TiAlN-Coated Carbide Ball End Mills

    WIDIA HANITA

    Miniature General Purpose Finishing TiAlN-Coated Carbide Ball End Mills

    Multiple items available35

    N/A

  • About these products
    The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings. Finishing end mills create a finer finish on the workpiece than roughing and roughing/finishing end mills. Miniature end mills have a smaller diameter and provide more precision and better control over material removal during detailed milling tasks than standard ball end mills.
    Miniature General Purpose Finishing TiAlN-Coated Carbide Ball End Mills
  • 2-Flute General Purpose Finishing Bright Finish Carbide Ball End Mills

    WIDIA HANITA

    2-Flute General Purpose Finishing Bright Finish Carbide Ball End Mills

    Multiple items available65

    N/A

  • About these products
    Two-flute end mills help maximize chip clearance. The bright finish on these end mills provides a smooth, polished surface.
    2-Flute General Purpose Finishing Bright Finish Carbide Ball End Mills
  • High-Performance Roughing/Finishing TiAlN-Coated Carbide Corner-Chamfer End Mills

    WIDIA HANITA

    High-Performance Roughing/Finishing TiAlN-Coated Carbide Corner-Chamfer End Mills

    Multiple items available75

    N/A

  • About these products
    The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.
    High-Performance Roughing/Finishing TiAlN-Coated Carbide Corner-Chamfer End Mills
  • High-Performance Roughing/Finishing TiAlN-Coated Carbide Square End Mills

    WIDIA HANITA

    High-Performance Roughing/Finishing TiAlN-Coated Carbide Square End Mills

    Multiple items available66

    N/A

  • About these products
    The TiAlN coating on these end mills withstands high temperatures and protects them from wear. It allows the end mills to be used at faster speeds than end mills with a bright finish, and it resists cracks and oxidation better than TiN or TiCN coatings.
    High-Performance Roughing/Finishing TiAlN-Coated Carbide Square End Mills
  • High-Performance Roughing AlTiN-Coated Carbide Corner-Chamfer End Mills

    WIDIA HANITA

    High-Performance Roughing AlTiN-Coated Carbide Corner-Chamfer End Mills

    Multiple items available16

    N/A

  • About these products
    The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.
    High-Performance Roughing AlTiN-Coated Carbide Corner-Chamfer End Mills
  • High-Performance Roughing TiCN-Coated Carbide Corner-Chamfer End Mills

    WIDIA HANITA

    High-Performance Roughing TiCN-Coated Carbide Corner-Chamfer End Mills

    Multiple items available12

    N/A

  • About these products
    The TiCN coating on these end mills protects them from wear and is harder and more wear-resistant than a TiN coating.
    High-Performance Roughing TiCN-Coated Carbide Corner-Chamfer End Mills
  • High-Performance Finishing AlTiN-Coated Carbide Ball End Mills

    WIDIA HANITA

    High-Performance Finishing AlTiN-Coated Carbide Ball End Mills

    Multiple items available40

    N/A

  • About these products
    The AlTiN coating on these end mills protects them from wear and is more resistant to high heat than TiN, TiCN, and TiAlN coatings. AlTiN-coated end mills are used for milling hard and abrasive materials.
    High-Performance Finishing AlTiN-Coated Carbide Ball End Mills