Sorry, we’ve encountered a problem displaying product pricing. Please Refresh the page.

MORSE

35 results found that include 1,221 Products
  • FILTER
  • SORT
Show All Selected Filters Show Less Selected Filters
  • Pilot Drill Bits

    MORSE

    Pilot Drill Bits

    Multiple items available3

    N/A

  • About these products
    Pilot drill bits attach to a hole saw arbor. They extend past the hole saw cutting edge to drill a starter hole that prevents the hole saw from walking when it begins the cut. Pilot bits are replaced when they are worn or damaged.
    Pilot Drill Bits
  • Blades for Deep Cut Portable Band Saws (44-7/8" and Longer)

    MORSE

    Blades for Deep Cut Portable Band Saws (44-7/8" and Longer)

    Multiple items available23

    N/A

  • About these products
    These band saw blades for are used in deep-cut portable band saws that have a cutting capacity up to 5". They are used to cut metal pipe, strut channel, and threaded rod.
    Blades for Deep Cut Portable Band Saws (44-7/8" and Longer)
  • Metal-Cutting Hole Saws without Arbor

    MORSE

    Metal-Cutting Hole Saws without Arbor

    Multiple items available60

    N/A

  • About these products
    These metal-cutting hole saws don't include an arbor, allowing users to customize their hole saw or use their own arbor. Arbors attach to a hole saw to mount the saw in the drill and attach a pilot bit.
    Metal-Cutting Hole Saws without Arbor
  • Carbon Steel Band Saw Blades for Cutting Wood

    MORSE

    Carbon Steel Band Saw Blades for Cutting Wood

    Multiple items available403

    N/A

  • About these products
    Carbon steel band saw blades for cutting wood are used in wood-cutting band saws that have a higher speed than metal-cutting band saws. Wood-cutting band saw blades are welded to form a continuous loop.
    Carbon Steel Band Saw Blades for Cutting Wood
  • Metal-Cutting Hole Saws with Attached Arbor

    MORSE

    Metal-Cutting Hole Saws with Attached Arbor

    Multiple items available42

    N/A

  • About these products
    These metal-cutting hole saws have a permanently attached arbor. They are used when workers repeat the same cuts often and don't need to use the arbor on other tools. Arbors attach to a hole saw to mount the saw in the drill and attach a pilot bit.
    Metal-Cutting Hole Saws with Attached Arbor
  • General Purpose Standard-Width Band Saw Blades

    MORSE

    General Purpose Standard-Width Band Saw Blades

    Multiple items available121

    N/A

  • About these products
    These standard-width general purpose band saw blades are used to cut a variety of common metals including mild steel, stainless steel, aluminum, and softer metals such as brass. General purpose blades are often in maintenance shops where a variety of materials are cut so blades don't have to be changed between cuts. Standard-width blades are designed for occasional use, such as maintenance tasks and short-run production.
    General Purpose Standard-Width Band Saw Blades
  • General Purpose Narrow Band Saw Blades

    MORSE

    General Purpose Narrow Band Saw Blades

    Multiple items available194

    N/A

  • About these products
    These narrow general purpose band saw blades are used to cut a variety of common materials including mild steel, stainless steel, aluminum, and softer metals such as brass. General purpose blades are often in maintenance shops where a variety of materials are cut so blades don't have to be changed between cuts. Narrow band saw blades are up to 1/2" wide and are flexible for making curved cuts on vertical band saws.
    General Purpose Narrow Band Saw Blades
  • Hole Saw Arbors

    MORSE

    Hole Saw Arbors

    Multiple items available5

    N/A

  • About these products
    Hole saw arbors attach to a hole saw so it can be held by the drill. The shank end holds the hole saw in the drill. The opposite end attaches to the hole saw and has a receptacle for installing a pilot bit. Hole saw arbors are interchangeable with hole saws that have the same shank size.
    Hole Saw Arbors
  • Arbor Extensions & Adapters

    MORSE

    Arbor Extensions & Adapters

    Multiple items available3

    N/A

  • About these products
    Arbor extensions attach to an existing arbor to extend the reach of a hole saw or hole cutter. Arbor adapters allow you to attach an arbor to a tool without a drill chuck, such as an angle grinder. Arbors attach to a hole saw or hole cutter to hold the item in the drill.
    Arbor Extensions & Adapters
  • Multipurpose Hole Cutters with Attached Arbor

    MORSE

    Multipurpose Hole Cutters with Attached Arbor

    Multiple items available22

    N/A

  • About these products
    These multipurpose hole cutters have a permanently attached arbor. They are used when workers repeat the same cuts often and don't need to use the arbor on other tools. Arbors attach to a hole saw to mount the saw in the drill and attach a pilot bit.
    Multipurpose Hole Cutters with Attached Arbor
  • Wood-Cutting Hole Saws without Arbor

    MORSE

    Wood-Cutting Hole Saws without Arbor

    Multiple items available49

    N/A

  • About these products
    These wood-cutting hole saws don't include an arbor, allowing users to customize their hole saw or use their own arbor. Arbors attach to a hole saw to mount the saw in the drill and attach a pilot bit. Wood-cutting hole saws cut wood and nail-embedded wood.
    Wood-Cutting Hole Saws without Arbor
  • Blades for Standard-Depth Portable Band Saws (32-7/8" to 35-3/8" Length)

    MORSE

    Blades for Standard-Depth Portable Band Saws (32-7/8" to 35-3/8" Length)

    Multiple items available10

    N/A

  • About these products
    Blades for standard portable band saws have a length of 32-7/8" to 35-3/8" and are used to cut metal pipe, strut channel, and threaded rod. They are used on medium-sized band saws with a 3" to 3-1/2" cutting capacity.
    Blades for Standard-Depth Portable Band Saws (32-7/8" to 35-3/8" Length)
  • Multipurpose Hole Saw Kits

    MORSE

    Multipurpose Hole Saw Kits

    Multiple items available14

    N/A

  • About these products
    Multipurpose hole saw kits include different sizes of hole saws. The hole saws can be used on a variety of materials including wood, plastic, laminate, and some metals. Hole saws have a cutting rim and hollow core to remove material while leaving a core of the material whole. This allows larger holes to be drilled faster using a handheld power drill than would be possible using a drill bit. The arbor holds the pilot bit and secures the hole saw in the drill. The pilot bit keeps the hole saw from walking or moving when it starts the cut.
    Multipurpose Hole Saw Kits
  • Drum Lifter

    MORSE

    Drum Lifter

    Multiple items available2

    N/A

  • Masonry & Tile-Cutting Hole Saws without Arbor

    MORSE

    Masonry & Tile-Cutting Hole Saws without Arbor

    Multiple items available52

    N/A

  • About these products
    These masonry- and tile-cutting hole saws don't include an arbor, allowing users to customize their hole saw or use their own arbor. Arbors attach to a hole saw to mount the saw in the drill and attach a pilot bit.
    Masonry & Tile-Cutting Hole Saws without Arbor
  • Chop Saw,  14" Blade Dia.,  1300 RPM Max. Blade Speed,  1" Arbor Size

    MORSE

    Chop Saw, 14" Blade Dia., 1300 RPM Max. Blade Speed, 1" Arbor Size

    Item # 13P9861

    Web Price
    $594.00 / each
  • About these products
    Chop saws make straight cuts in metal. They have a fence that supports the workpiece and are adjustable to make angled and miter cuts.
    Chop Saw, 14" Blade Dia., 1300 RPM Max. Blade Speed, 1" Arbor Size