COVID-19 RECOVERY - Products and Solutions to help your business move forward - Learn More

Safety & Health

Safety Communications

Surrounded by Too Many Warning Signs?

6/25/20
Chemical Engineering Progress

Technicians and operators in the chemical process industries (CPI) can become overloaded with warning signage, nuisance alarms, and other safety communications. These communications can become so commonplace that personnel grow accustomed to them. When a warning sign becomes mundane to employees, it no longer serves its intended purpose. If people are bombarded with too many safety communications, they may ignore a warning sign in a process area or skip over the cautions mentioned in a procedure.

The photographs above were taken at an airport where workers were using a personnel lift to access an elevated location for maintenance. The platform displays 24 warning labels. All of these warning signs acknowledge a different caution to be heeded. However, it is unlikely that an operator would take the time to review and understand each of the 24 warning labels before using the lift.

Are the many warning signs at your facility actually distracting or overwhelming, such that personnel cease to pay attention to them? Does the presence of too many cautions defeat their purpose?

Did You Know?

  • Warning signs are posted to remind people about specific equipment and process hazards in an area.
  • Warning signs may also specify things that are not safe in a specified process area or in relation to a specified piece of equipment.
  • In a process area, signs often list requirements for personal protective equipment (PPE) and other safety information. Warnings and PPE requirements may also be included in operating and maintenance procedures or work permit documents.
  • If there are too many signs or procedure warnings, some may be overlooked and an incident may occur.

What Can You Do?

  • Always read the warning signs before entering a process area or using a piece of equipment. Remind yourself of what should and should not be done.
  • Read and understand the safety and PPE requirements in operating procedures, maintenance procedures, or work permit documents. Follow these requirements, and ask for help from your supervisor if you do not understand the requirements.
  • If you think that a written procedure or a signboard contains too many warnings that may distract readers from what is essential, report that to your supervisor.
  • Check that signs are in the right places, are accurate, and are effective reminders.
  • Suggest opportunities to improve warning signs or warnings in procedures. For example, there are 24 warning labels on the platform in the picture above. Could some of these warning labels be combined, prioritized, or even omitted, if unnecessary?

 

This article was from Chemical Engineering Progress and was legally licensed through the NewsCred publisher network. Please direct all licensing questions to legal@newscred.com.

The information contained in this article is intended for general information purposes only and is based on information available as of the initial date of publication. No representation is made that the information or references are complete or remain current. This article is not a substitute for review of current applicable government regulations, industry standards, or other standards specific to your business and/or activities and should not be construed as legal advice or opinion. Readers with specific questions should refer to the applicable standards or consult with an attorney.

SIGN UP FOR EMAIL

Get more great content like this sent to your inbox.

promo

THE PRODUCTS YOU NEED,
WHEN YOU NEED THEM

SHOP NOW