By Grainger Editorial Staff 11/2/20
Many employees in chemical manufacturing are exposed to hazardous chemicals such as cleaning chemicals, process chemicals, research chemicals and more. Controlling exposure to these chemical hazards is fundamental to protecting employees. The hierarchy of controls is a systematic way to group hazard control methods according to their effectiveness by considering the most effective methods before less effective methods. The inverted triangle of the hierarchy has elimination at the top and is the most desirable control followed by substitution of a less hazardous chemical. If a chemical hazard cannot be eliminated or substituted then engineering and administrative controls and PPE must be the primary means used to help reduce exposure.
PPE is designed to provide protection from injuries and illnesses resulting from exposure to a variety of hazardous chemicals and substances. According OSHA, chemical-resistant PPE needs to protect the eyes and face, hearing, respiratory, body, hands and feet, be able to stand up to certain chemical hazards and guard against splashes and vapors created during the manufacturing process.
Eye and face protection must protect wearers from the hazards associated with chemical splashes. Exposure to industrial and cleaning chemicals are common causes of chemical burns to the eyes and face. Chemical safety goggles form an airtight seal around the wearer’s face, preventing any liquids or fumes from reaching the eyes. Face shields block splashes by covering the worker’s face with a clear plastic visor that can also offer heat and impact resistance.
Many workers are exposed to noise in the workplace every day but when uncontrolled, this exposure may cause permanent hearing loss. In addition, research shows that exposure to ototoxicants, such as pesticides, solvents and pharmaceuticals, can cause hearing loss or balance problems, regardless of noise exposure. Wearing hearing protection can protect the ears from noise and help to limit ototoxicant exposure.
Appropriate respirators should be used to protect against adverse health effects caused by inhaling chemicals and gases and splashes. Full-face respirators cover the wearer’s entire face and form a seal, so that only filtered or externally supplied breathing air enters the mask. Replaceable contaminant-specific cartridges help filter chemicals to reduce exposure. Supplied air respirators use compressed air from a remote source, typically outside of the contaminated areas. Powered air purifying respirators (PAPR) use a filter to purify the surrounding air and then blow it into the attached face mask for an unlimited supply of fresh air. Self-contained breathing apparatus (SCBA) respirators include their own portable air supply.
9 protects a worker’s arms, legs and core from exposure due to chemical splashes. According to OSHA, skin protection PPE should be worn anytime a worker could be exposed to chemicals anywhere in the workplace. Chemical-resistant clothing can range from aprons and overalls to coveralls and encapsulated suits. The required level of protection, chemical resistance and suit design are the primary factors used when selecting chemical protective clothing.
Gloves protect the hands and wrists from exposure to chemicals, with different levels of protection depending on the specific risks present. Disposable nitrile gloves may provide limited chemical splash protection while chemical-resistant gloves made of different rubber polymers may protect against direct exposure to a range of chemicals. Gloves can also include additional safety features, such as heat, cut and cold resistance. Chemical-resistant sleeves come in a variety of materials to protect the forearms and upper arms from chemical spills and splashes.
Chemical-resistant footwear should be worn anytime a worker may be exposed to chemicals or corrosive materials. Boots made for chemical resistance will use materials such as PVC to cover the entire foot and lower leg. Boots can also include other safety features, such as puncture-resistant soles and steel toes.
Make sure you have the right chemical PPE in stock when and where your need it.
The information contained in this article is intended for general information purposes only and is based on information available as of the initial date of publication. No representation is made that the information or references are complete or remain current. This article is not a substitute for review of current applicable government regulations, industry standards, or other standards specific to your business and/or activities and should not be construed as legal advice or opinion. Readers with specific questions should refer to the applicable standards or consult with an attorney.