Business Recovery:

Products and solutions to help your business move forward.

Get Started

Safety Moment

Grainger Editorial Staff

Grainger is committed to protecting people, property, processes and the environment, both in the workplace and at home. To expand on this commitment, Grainger is providing a monthly Safety Moment to help drive awareness of critical safety issues and provide practical solutions to mitigate associated risk. Use these insights to assist with your safety committee meetings, toolbox talks and shift-starter meetings.

This Month's Theme: OSHA Top 10

Every year, OSHA's list of frequently cited standards serves as an important reminder of some of the workplace safety issues that matter most.

To help keep workers safe, OSHA can issue fines to businesses that put their workers at risk—fines of up to $13,653 per serious violation, up to $13,653 per day for failure to abate and up to $136,532 per willful or repeated violation.

Fall protection, respiratory protection and ladders topped the agency's 2021 list.

Fall protection – general requirements (1926.501) has been the agency's most-cited standard for 11 years running. In 2021, there were 5,271 violations.

After transportation incidents, falls are the leading cause of work-related death. And according to the National Safety Council, falls are largely preventable.

Fall protection is important for any organization that uses ladders, scaffolding or elevated work platforms, as well as when work involves stairways, roofs, wall openings or unprotected floor holes, among other common hazards.

Respiratory protection (1910.134) was OSHA's No. 2 standard in 2021, up from No. 3 in 2020. There were 2,521 violations of this standard in 2021. Respirators and respiratory protection programs have been top-of-mind in many organizations since the COVID-19 pandemic began in March 2020.

In 2021, the percentage of cited violations of this standard increased from 5.3% to 6.5%.

The most-cited sections of the standard were 1910.134(e)(1), on medical evaluation; 1910.134(f)(2), on fit testing; and 1910.134(c)(1), on establishing and implementing written respiratory protection programs.

Ladders (1926.1053) was OSHA's No. 3 standard in 2021, up from No. 5 the year before.

The most-cited section of the standard was 1926.1053(b)(1), for using a portable ladder that's too short and not properly secured at its top.

There were 1,269 violations of this section in 2021, which states that the ladder side rails need to extend at least three feet above the upper landing surface that the ladder is being used to access.

The data above is current as of Nov. 8. See the rest of OSHA's top 10 for 2021.

Learn how Grainger can help.

Use These Resources to Support Training and Awareness

Past Theme: Cold Stress

Prolonged exposure to cold weather or cold indoor working conditions can lead to cold stress. Some employers fail to recognize and address cold stress hazards because they don't know the related signs and symptoms, which include:

  • Hypothermia
  • Frostbite
  • Cold water immersion
  • Dehydration

Solutions that Work

Even the most attentive and proactive worker can’t tackle the dangers of cold stress alone. A cooperative approach is important. OSHA’s guidance for cold stress prevention lists engineering controls, training, safe work practices and personal protective equipment (PPE)such as appropriate cold weather attireas foundational components for employers to build into their work plans. Employers should:

  • Train workers on how to help prevent and recognize cold stress illnesses and injuries, and how to apply first aid treatment
  • Give workers frequent breaks in warm areas
  • Ensure employees are dressed properly in cold temperatures
  • Reduce exposure time
  • Allow workers to interrupt work if they feel a cold condition affecting them
  • Provide engineering controls such as thermostats and door flaps to help control exposure indoors

Register to view an on-demand cold stress webinar.

Learn how Grainger can help

Use These Resources to Support Training and Awareness

Past Theme: Working at Elevated Heights

People working at heights often do not take sufficient precautions, especially when carrying out work at relatively low heights (four to six feet). They fail to plan correctly, underestimate the risks involved or are just in a hurry to finish the job.

This leads to:

  • Higher serious injuries and fatalities (SIFs)
  • Higher direct and indirect cost related to a fall incident
  • Higher worker compensation rates

Solutions that Work

Employers and workers share in the responsibility of making sure all work done at elevated heights is done safely. Employers can help workers to understand what they need to do to protect themselves and should:

  • Establish fall prevention and protection policies and procedures and educate employees
  • Select proper fall protection for each employee working at elevated heights
  • Regularly inspect all equipment used in working at heights
  • Train employees on proper inspection, maintenance, and use of equipment
  • Take precautions to minimize the risk of falling objects

Employees, in turn, should learn and practice safe procedures and follow company policies and procedures and avoid cutting corners to save time.

Use These Resources to Support Training and Awareness

The information contained in this article is intended for general information purposes only and is based on information available as of the initial date of publication. No representation is made that the information or references are complete or remain current. This article is not a substitute for review of current applicable government regulations, industry standards, or other standards specific to your business and/or activities and should not be construed as legal advice or opinion. Readers with specific questions should refer to the applicable standards or consult with an attorney.


Get more great content like this sent to your inbox.