Navigation Menu New

Access My Account, Order History, Lists and more here.

Attachment Points for Tool Tethers

39 products
Attachment points for tool tethers create a secure connection between tools and an anchor point. They are used with load-rated tethers to ensure the tool can be supported. They are held in place using tool tape, friction, or pass-through tie components.
Brand

Attachment Points for Personal Items

Attachment Points for Personal Items
These attachment points are used to secure personal items (such as phones, water bottles, and radios) to a tool tether.
Loading...

Tape for Tool Tethering Attachment Points

Tape for Tool Tethering Attachment Points
Tool tethering tape is used to secure an attachment point to a tool when tools don't have anchoring slots. Tape is rated by the weight it will support. Heat shrink covers are often applied over tape to prevent the tape from unwrapping.
Loading...

D-Ring Strap Attachment Points for Tool Tethers

D-Ring Strap Attachment Points for Tool Tethers
These D-ring attachment points for tool tethers provide a connection to an anchor point or tool tether. The attachment is connected to the tool using tethering tape or a heat-shrink sleeve. The D-ring is then connected to a tool tether. The webbing is flexible and provides a surface for taping or securing to the tool. These attachment points are used to secure pliers, hammers, tape measures, and other hand tools within the specified weight range.
Loading...

Corded Strap Attachment Points for Tool Tethers

Corded Strap Attachment Points for Tool Tethers
These corded strap attachment points have a looped end that can be secured through a hole to connect the tool to a tether. The looped end is pushed through the hole and the strap is then pulled back through the loop to make a secure connection.
Loading...

Socket Attachment Points for Tool Tethers

Socket Attachment Points for Tool Tethers
Socket attachment points have an open end that slips over the end of a lightweight tool, such as a screw driver. The attachment has a D-ring or other connection point to attach a tool tether.
Loading...

Attachment Points for Power Tools

Attachment Points for Power Tools
Power tool attachment points have sleeves or metal plates that provide a secure attachment point for a tool tether.
Loading...

Attachment Points for Measuring Tape

Attachment Points for Measuring Tape
Measuring tape attachment points are designed so the tape can still be used while tethered to a tool tether.
Loading...

Self-Shrink Covers for Tool Tethering Attachment Points

Self-Shrink Covers for Tool Tethering Attachment Points
Self-shrink covers don't require heat to attach to a tool. They have a tube that slides freely over tool tether attachment points or tool tape. When the tube is removed the cover shrinks to conform to the tool surface. Tool tether covers create an abrasion-resistant surface to secure attachment points and ensure tool tape doesn't come unraveled.
Loading...

Shackle Attachment Points for Tool Tethers

Shackle Attachment Points for Tool Tethers
Shackle attachments are U-shaped and have a removeable bolt that connects to a taper, waist, neck, or captive hole in a tool. The shackle creates a clean, secure attachment for the tool tether while allowing the tool to move freely.
Loading...

Wire Loop Attachment Points for Tool Tethers

Wire Loop Attachment Points for Tool Tethers
These wire loop attachment points are looped through a captive hole in a tool to allow a tool tether to be connected. These attachments fit through smaller holes than split rings and corded attachments.
Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.