TECHNIKS

Retention Knob, Straight, 2.25 In., CAT40, Length 2.25 In., For Use With CAT40 Tool Holders

Collet Chuck, Dimension Type V-Flange, Taper Size CAT40, Collet Series ER32, Min. Collet Capacity 0.0390 In., Max. Collet Capacity 0.7874 In., Projection 2.760 In., Nut Dia. 1.970 In., Material Steel, For Use With Collets, Nuts, Coolant Rings, Retention Knobs, Wrenches, Tightening Stands

Collet Chuck, Dimension Type V-Flange, Taper Size CAT40, Collet Series ER32, Min. Collet Capacity 0.0390 In.,...More

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1875 In., Projection 6.000 In., Nose Type Extended, Nose Dia. 0.690 In., Coolant Through Yes, Lock Screw Thread Size 8-32, End Single

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1875 In., Projection 6.000 In., Nose Type...More

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1250 In., Projection 6.000 In., Nose Type Extended, Nose Dia. 0.690 In., Coolant Through Yes, Lock Screw Thread Size 6-32, End Single

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1250 In., Projection 6.000 In., Nose Type...More

Hand Wrench, E-Wrench, 9.96 In., ER32, Length 9.96 In., For Use With ER32 Nut

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.2500 In., Projection 6.000 In., Nose Type Extended, Nose Dia. 0.780 In., Coolant Through Yes, Lock Screw Thread Size 1/4-28, End Single

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.2500 In., Projection 6.000 In., Nose Type...More

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1250 In., Projection 2.370 In., Nose Type Standard, Nose Dia. 0.690 In., Bore Depth 0.787 In., Coolant Through Yes, Lock Screw Thread Size 6-32, End Single

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1250 In., Projection 2.370 In., Nose Type...More

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 1.0000 In., Projection 1.750 In., Nose Type Stubby, Nose Dia. 2.000 In., Coolant Through Yes, Lock Screw Thread Size 3/4-16, End Single

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 1.0000 In., Projection 1.750 In., Nose Type...More

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1875 In., Projection 2.500 In., Nose Type Standard, Nose Dia. 0.690 In., Bore Depth 0.984 In., Coolant Through Yes, Lock Screw Thread Size 8-32, End Single

End Mill Holder, Dimension Type SAE, Taper Size CAT40, Bore Dia. 0.1875 In., Projection 2.500 In., Nose Type...More

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.) 5-11/16, Dia. 1.5 In., Hole Dia. 0.625 In., End Single, Projection 3.0 In., Socket Depth (In.) 1.85, Standards DIN 69871-AD, Taper CAT40, Thread 1/2-20

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.)...More

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.) 6-3/16, Dia. 0.78 In., Hole Dia. 0.25 In., End Single, Projection 3.0 In., Socket Depth (In.) 1.38, Standards DIN 69871-AD, Taper CAT40, Thread 1/4-28

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.)...More

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.) 5-11/16, Dia. 1.25 In., Hole Dia. 1.5 In., End Single, Projection 2.5 In., Socket Depth (In.) 1.232, Standards DIN 69871-AD, Taper CAT40, Thread 7/16-20

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.)...More

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.) 5-11/16, Dia. 1.5 In., Hole Dia. 0.750 In., End Single, Projection 3.0 In., Socket Depth (In.) 1.429, Standards DIN 69871-AD, Taper CAT40, Thread 5/8-18

Tool Holder, V-Flange, SLN, For Use With End Mill Cutter, Application For Holding Tools, Overall Length (In.)...More

Plugged Coolant Collet, Collet Series ER25, Range 12.5 to 12.1mm, Size 12.5mm, Coolant Through Yes, For Use With ER Collet Chuck Series, RD Collet Chuck Series, DR Collet Chuck Series, ESX Collet Chuck Series, BR Collet Chuck Series

Plugged Coolant Collet, Collet Series ER25, Range 12.5 to 12.1mm, Size 12.5mm, Coolant Through Yes, For Use...More

Spring Collet, Collet Series ER32, Range 5 to 4.6mm, Size 05mm, Coolant Through Yes, For Use With ER Collet Chuck Series, RD Collet Chuck Series, DR Collet Chuck Series, ESX Collet Chuck Series, BR Collet Chuck Series

Spring Collet, Collet Series ER32, Range 5 to 4.6mm, Size 05mm, Coolant Through Yes, For Use With ER Collet...More

ER Collet, Collet Series ER25, Range 0.711 In. to 0.750 In., Size 3/4 In., Coolant Through Yes, For Use With DR Collet Series, RD Collet Series, ESX Collet Series, AR Collet Series, BR Collet Series

ER Collet, Collet Series ER25, Range 0.711 In. to 0.750 In., Size 3/4 In., Coolant Through Yes, For Use With...More

Spring Collet, Collet Series ER40, Range 0.625 In. to 0.609 In., Size 5/8 In., Coolant Through Yes, For Use With ER Collet Chuck Series, RD Collet Chuck Series, DR Collet Chuck Series, ESX Collet Chuck Series, BR Collet Chuck Series

Spring Collet, Collet Series ER40, Range 0.625 In. to 0.609 In., Size 5/8 In., Coolant Through Yes, For Use...More

Collet Chuck, Dimension Type Straight, Taper Size BT30, Collet Series ER11, Min. Collet Capacity 0.019 In., Max. Collet Capacity 0.281 In., Projection 21.6mm, Nut Dia. 0.75 In., Yes Runout, Spindle Yes, Balanceable Yes, Pre-Balanced Yes, Coolant Through Yes, Material 8620 Steel, For Use With 04608

Collet Chuck, Dimension Type Straight, Taper Size BT30, Collet Series ER11, Min. Collet Capacity 0.019 In.,...More

Spring Collet, Collet Series ER40, Range 0.313 In. to 0.297 In., Size 5/16 In., Coolant Through Yes, For Use With ER Collet Chuck Series, RD Collet Chuck Series, DR Collet Chuck Series, ESX Collet Chuck Series, BR Collet Chuck Series

Spring Collet, Collet Series ER40, Range 0.313 In. to 0.297 In., Size 5/16 In., Coolant Through Yes, For Use...More

Collet Set, TG100, Size/Range 3/32 In. to 1 In., Capacity 1/32 In., Number of Pieces 30, Includes Wooden Collet Tray

Collet Set, TG100, Size/Range 3/32 In. to 1 In., Capacity 1/32 In., Number of Pieces 30, Includes Wooden...More

Retention Knob, Knob Dia. 0.75 In., Flange to Angle Length 0.787 In., Flange to Knob Length 1.024 In., Angle 15 Degrees , Thread Size 5/8 In.-11, CAT40, Coolant Through No, Neck Dia. 0.55 In., Overall Length 1.88 In., Flange Thickness 0.640 In.

Retention Knob, Knob Dia. 0.75 In., Flange to Angle Length 0.787 In., Flange to Knob Length 1.024 In., Angle...More

Collet Hold Extension, ER16, Shank Shape Cylindrical, Shank Dia. 0.5 In., Tool Side Dia. 1.26 In., Overall Length 177mm

Collet Hold Extension, ER16, Shank Shape Cylindrical, Shank Dia. 0.5 In., Tool Side Dia. 1.26 In., Overall...More

Collet Set, ER25, Size/Range 1/8 In. to 5/8 In., Capacity 1/32 In., Number of Pieces 16, Includes Wooden Collet Tray

Collet Set, ER25, Size/Range 1/8 In. to 5/8 In., Capacity 1/32 In., Number of Pieces 16, Includes Wooden...More

Clamping Nut, Dimension Type EOC8, Nut Dia. 1.18 In., Yes Runout, Spindle Yes, Balanceable Yes, Pre-Balanced Yes, Coolant Through Yes, Material 8620 Steel

Clamping Nut, Dimension Type EOC8, Nut Dia. 1.18 In., Yes Runout, Spindle Yes, Balanceable Yes, Pre-Balanced...More

Straight Shank Collet Chuck Extension, ER20, Shank Shape Cylindrical, Shank Dia. 0.75 In., Tool Side Dia. 1.38 In., Overall Length 100mm

Straight Shank Collet Chuck Extension, ER20, Shank Shape Cylindrical, Shank Dia. 0.75 In., Tool Side Dia....More

Collet Set, TG150, Size/Range 1/2 In. to 1 1/2 In., Capacity 1/32 In., Number of Pieces 33, Includes Wooden Collet Tray

Collet Set, TG150, Size/Range 1/2 In. to 1 1/2 In., Capacity 1/32 In., Number of Pieces 33, Includes Wooden...More

Collet Wrench, Collet Series DNA16, Hand Wrench, For Use With DNA16 Nut, Size DNA16

Tap Holder, Dimension Type Straight, Collet Series ER11, Min. Collet Capacity 0.0200 In., Max. Collet Capacity 0.2500 In., Projection 1.043 In., Nut Dia. 0.630 In., Material Steel, For Use With Collet Chuck Tool Holders

Tap Holder, Dimension Type Straight, Collet Series ER11, Min. Collet Capacity 0.0200 In., Max. Collet...More

Tap Holder, Dimension Type Straight, Collet Series ER16, Min. Collet Capacity 0.0200 In., Max. Collet Capacity 0.4060 In., Projection 0.984 In., Nut Dia. 0.870 In., Material Steel, For Use With Collet Chuck Tool Holders

Tap Holder, Dimension Type Straight, Collet Series ER16, Min. Collet Capacity 0.0200 In., Max. Collet...More

Collet Chuck, Dimension Type HSK63F, Taper Size HSK63F, Collet Series ER40, Min. Collet Capacity 0.0790 In., Max. Collet Capacity 1.0240 In., Projection 3.543 In., Nut Dia. 2.480 In., Material Steel, For Use With Collets, Nuts, Coolant Rings, Retention Knobs, Wrenches, Tightening Stands

Collet Chuck, Dimension Type HSK63F, Taper Size HSK63F, Collet Series ER40, Min. Collet Capacity 0.0790 In.,...More

ER Collet, Collet Series ER32, Range 11mm to 12mm, Size 12.0mm, Coolant Through Yes, For Use With DR Collet Series, RD Collet Series, ESX Collet Series, AR Collet Series, BR Collet Series

ER Collet, Collet Series ER32, Range 11mm to 12mm, Size 12.0mm, Coolant Through Yes, For Use With DR Collet...More