Slide HammersAbout this category

Slide Hammer Unit10 lb.Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Includes Hammer and Slide

Slide Hammer Puller, Reversible, 5 lb., Internal, Number of Jaws 2 or 3, Jaw Spread (In.) 1-1/2, Reach (In.) 4-1/2, Handle End Thread (In.) 5/8-20Overall Length (In.) 27, Includes 5-lb. Slide Hammer, 2-Way/3-Way Cross Blocks, Cone, (3) Internal Jaws, (6) Internal/External Jaws, Rear Axle and Dent-Pulling Attachments, Puller Hook Attachment, Grip Wrench Adapter, Front Hub Puller Attachment, Case

Slide Hammer Puller, Reversible, 5 lb., Internal, Number of Jaws 2 or 3, Jaw Spread (In.) 1-1/2, Reach (In.)...More

Hammer Puller Set, Reversible Slide, 2.5 Pounds, Internal,External, Number of Jaws 9, Jaw Spread 2 3/8 to 6 1/4 In, Handle End Thread 5/8 In, Hole Dia 1/2 In, Overall Length 29 In, Includes 3Pc Pilot Bearing Jaw, 3Pc Medium Jaw, Long Jaw, Puller Hook, 2 Way Cross Head. Cross Block, 1 7/8 and 5 5/8 In Cap Screws

Hammer Puller Set, Reversible Slide, 2.5 Pounds, Internal,External, Number of Jaws 9, Jaw Spread 2 3/8 to 6...More

Slide Hammer Puller Set, 8 Way, 5 Pounds, Internal,External, Number of Jaws 3, Jaw Spread 2 3/8 to 6 1/4 In, Handle End Thread 5/8 In, Hole Dia 1/2 In, Overall Length 29 In, Includes Rear Axle Pulling Attachment, 3 Way Cross Head, Cone, 2 Way Cross Block, Puller Hook Attachment, 3 Pulling Jaws, Grip Wrench Adapter With Single Lead, And Dent Puller Attachment

Slide Hammer Puller Set, 8 Way, 5 Pounds, Internal,External, Number of Jaws 3, Jaw Spread 2 3/8 to 6 1/4 In,...More

Slide Hammer Puller Set, 10 Way, 5 Pounds, Jaw Spread 2 3/8 to 6 1/4 In, Handle End Thread 5/8 In, Hole Dia 1/2 In, Overall Length 29 In, Includes Rear Axle Pulling Attachment, 3 Way Cross Head, Cone, 2 Way Cross Block, Puller Hook Attachment, Puller Hook Attachment, Grip Wrench Adapter With Single Lead, Dent Puller Attachment, Front Hub Puller Assembly, Forcing Screw, Sleeve, And Blow Molded Case

Slide Hammer Puller Set, 10 Way, 5 Pounds, Jaw Spread 2 3/8 to 6 1/4 In, Handle End Thread 5/8 In, Hole Dia...More

Slide Hammer Unit2-1/2 lb.Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Includes Hammer and Slide

Slide Hammer Unit, 5-1/2 lb., Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Includes Hammer and Slide

Slide Hammer Unit, 5-1/2 lb., Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Includes Hammer and...More

Slide Hammer Puller, Reversible, 5 lb., Internal, Number of Jaws 2 or 3, Jaw Spread (In.) 1-1/4, Reach (In.) 3-1/2, Handle End Thread (In.) 5/8-20Overall Length (In.) 27, Includes Puller, 5 lb. Hammer, 2-Way or 3-Way Head

Slide Hammer Puller, Reversible, 5 lb., Internal, Number of Jaws 2 or 3, Jaw Spread (In.) 1-1/4, Reach (In.)...More

Slide Hammer Puller, Nonreversible, 3 lb., Internal, Number of Jaws 2, Jaw Spread (In.) 1/2 to 1-3/8Handle End Thread (In.) 1/2-20Overall Length (In.) 27, Includes Puller, 3 lb. Hammer, 2 jaw

Slide Hammer Puller, Nonreversible, 3 lb., Internal, Number of Jaws 2, Jaw Spread (In.) 1/2 to 1-3/8Handle...More

Slide Hammer Sledge, 14 Lb, Overall Length 30 In, Includes (6) Pin Driver Tips and Bag

Slide Hammer Unit, Nonreversible, 5 lb., Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Handle Length Not Included, Rod Length 24 In.

Slide Hammer Unit, Nonreversible, 5 lb., Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Handle...More

Body Dent Puller, 3.72 lb., Overall Length (In.) 16, Handle Length 3-1/2 In., Rod Length 13-1/2 In., Rod Dia. 1/2 In., Hammer Length 4-3/8 In., Hammer Dia. 1-1/5 In.

Body Dent Puller, 3.72 lb., Overall Length (In.) 16, Handle Length 3-1/2 In., Rod Length 13-1/2 In., Rod Dia....More

Slide Hammer, 14 Lb, Overall Length 30 In, Includes 2 In Pin Driver and Bag

Pilot Bearing Puller, Locking, Capacity 1/2 ton, Number of Jaws 2, Nonreversible, Jaw Reach 1-3/4 In., Jaw Spread 1/2 In. to 2 In., 5/8 x 18 Screw Size, Steel, Puller Length 19 In., For Use With Jaw Pullers, Designed to Pull Flywheel Pilot Bearings in Close Quarters with a Slide Hammer Can Not Be Used, Operates on Many Models with Engine in Chassis, Includes Puller, 4 lb. Hammer

Pilot Bearing Puller, Locking, Capacity 1/2 ton, Number of Jaws 2, Nonreversible, Jaw Reach 1-3/4 In., Jaw...More

Slide Hammer Puller, Reversible, 2-1/2 lb., Internal, Number of Jaws 2 or 3, Jaw Spread (In.) 1-1/4, Reach (In.) 3-1/2, Handle End Thread (In.) 5/8-20Overall Length (In.) 27, Includes Puller, 2-1/2-lb. Hammer, 2-Way or 3-Way Head

Slide Hammer Puller, Reversible, 2-1/2 lb., Internal, Number of Jaws 2 or 3, Jaw Spread (In.) 1-1/4, Reach...More

Slide Hammer, 2-1/2 lb., Overall Length (In.) 4, Hammer Dia. 5/8 In.

Slide Hammer Sledge, 21 Lb, Overall Length 46 In, Includes (6) Pin Driver Tips and Bag

Mechanical Pin Driver Set, 36 Pc, Includes 4XGR8 and 4XGR9

Mechanical Set, 18 Pc, Includes No. 4ETX7, 4ETX8 Hammers, 4ETX2, 4ETX3, 4ETX4, 4ETX5, 1TFX8 Tie Rod/Ball Joint Separators, 4ETW5 Pin Driver, 1TFY4, 1TFY5, 1TFY6 Bushing/Bearing Tools, 1TFZ1 Wedge, 1TFY7, 1TFY8 Bead Breakers, 1TFX9 Chisel Tip, 1TFZ2 Handle Weight, 4ETY1 Support Strap, 4ETY4 Case

Mechanical Set, 18 Pc, Includes No. 4ETX7, 4ETX8 Hammers, 4ETX2, 4ETX3, 4ETX4, 4ETX5, 1TFX8 Tie Rod/Ball...More

Pin Driver Set, 18 Pc, Includes No. 4ETX6, 4ETX9 Hammers, 4ETW2, 4ETW3, 4ETW4, 4ETW5, 4ETW6, 4ETW7 Pin Drivers, 4ETW8, 4ETW9, 4ETX1 Pin Inserters, 1TFY1, 1TFY2, 1TFY3 Pin Removers, 1TFY9 Scarifier Tip, 1TFZ2 Handle Weight, 4ETY1 Support Strap, 4ETY3 Case

Pin Driver Set, 18 Pc, Includes No. 4ETX6, 4ETX9 Hammers, 4ETW2, 4ETW3, 4ETW4, 4ETW5, 4ETW6, 4ETW7 Pin...More

Slide Hammer, 21 Lb, Overall Length 46 In, Includes 2 In Pin Driver and Bag

Rear Axle Service Puller Kit, Slide Hammer, 5 Lbs., Handle End Thread (In.) 5/8, Hole Dia. (In.) 1/2, Overall Length (In.) 29, Includes Rear Axle-Pulling Plate, Rear Axle-Bearing Puller

Rear Axle Service Puller Kit, Slide Hammer, 5 Lbs., Handle End Thread (In.) 5/8, Hole Dia. (In.) 1/2, Overall...More

Slide Hammer Puller, Universal, 5 lb., External, Number of Jaws 2, Jaw Spread (In.) 3 to 6-1/2, Reach (In.) 3 to 6-1/2, Handle End Thread (In.) 5/8-18, Overall Length (In.) 42, Handle Length 23 In., Rod Length 4 In., Rod Dia. 5/16 In., Hammer Length 5-1/4 In., Hammer Dia. 3-3/8 In.

Slide Hammer Puller, Universal, 5 lb., External, Number of Jaws 2, Jaw Spread (In.) 3 to 6-1/2, Reach (In.) 3...More

Slide Hammer Sledge, 9 Lb, Overall Length 30 In, Includes (6) Pin Driver Tips and Bag

Slide Hammer Puller, Nonreversible, 10 lb., Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Handle Length Not Included

Slide Hammer Puller, Nonreversible, 10 lb., Handle End Thread (In.) 5/8-18, Overall Length (In.) 24, Handle...More

Slide Hammer Sledge, 13 Lb, Overall Length 46 In, Includes (6) Pin Driver Tips and Bag

Slide Hammer,5 Pound, 5/8 Inch Hole Diameter

Pilot Bearing Puller, Nonreversible, 4-9/64 lb., Jaw Spread (In.) 1/2 to 2, Reach (In.) 1-3/4, Overall Length (In.) 20-39/64, Handle Length Not Included

Pilot Bearing Puller, Nonreversible, 4-9/64 lb., Jaw Spread (In.) 1/2 to 2, Reach (In.) 1-3/4, Overall Length...More

Dent Repair Kit, Includes Broached Nose Cone, Claw, Short Hook, Deep Hook, Door Edge Tool, Hook and Chain, Straight Driver, Tool Box, Hammer, Shaft, Threaded Adapter

Dent Repair Kit, Includes Broached Nose Cone, Claw, Short Hook, Deep Hook, Door Edge Tool, Hook and Chain,...More

Pilot Bearing Puller, Nonreversible, 4-9/64 lb., Jaw Spread (In.) 1/2 to 1-1/2, Reach (In.) 3/4, Overall Length (In.) 20-51/64, Handle Length Not Included

Pilot Bearing Puller, Nonreversible, 4-9/64 lb., Jaw Spread (In.) 1/2 to 1-1/2, Reach (In.) 3/4, Overall...More

Puller Slide Hammer 2 And 3 Way Heads

Slide Hammer Unit, Reversible, 5 lb., Reversible, Number of Jaws 2 or 3, Jaw Spread (In.) 4-1/4, Overall Length (In.) 27, Handle Length Not Included

Slide Hammer Unit, Reversible, 5 lb., Reversible, Number of Jaws 2 or 3, Jaw Spread (In.) 4-1/4, Overall...More