Navigation Menu New

Access My Account, Order History, Lists and more here.

Strap & Cable Anchors

9 products
Strap and cable anchors provide a reusable anchor point to connect a lanyard or self-retracting lifeline (SRL) as part of a personal fall protection system when working at height. They have a loop or ring around each end so they wrap around structural components when the structural component is exposed on all sides. They are often wrapped around beams in new construction. These anchors can be used where space is limited or where clamps cannot be used. Anchors should always be inspected and replaced after being exposed to a fall.
Brand

Webbed-Strap Pass-Through Anchors

Webbed-Strap Pass-Through Anchors
These webbed-strap pass-through anchors wrap around beams, pipes, framing, and other structural components to provide a tie-off point for an SRL or lanyard. They have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors can be removed and reused as needed. Anchors should always be inspected and replaced after being exposed to a fall.

Anchor Material: Unspecified

Loading...

Kevlar®

Loading...

Polyester

Loading...

Steel

Loading...

Cable Pass-Through Anchors

Cable Pass-Through Anchors
These cable pass-through anchors wrap around a beam, pipe, framing, or other structural component to provide a secure tie-off point for a lanyard or SRL as part of a personal fall protection system. Cable anchors are stronger and more durable than webbed-strap anchors and won't rip when exposed to sharp edges. The anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors can be removed and reused as needed. Anchors should always be inspected and replaced after being exposed to a fall.

Stainless Steel

Loading...

Steel

Loading...

Cable Tie-Off Anchors with Carabiner Connector

Cable Tie-Off Anchors with Carabiner Connector
These cable tie-off anchors wrap around a beam, pipe, framing, or other structural component to provide a secure tie-off point for a lanyard or SRL as part of a personal fall protection system. They have a carabiner on one end and two rings on the other end. The carabiner attaches to one ring to provide a secure connection around the structure and the SRL or lanyard is attached to the other ring. Cable anchors are stronger and more durable than webbed-strap anchors and won't rip when exposed to sharp edges. They can be removed and reused as needed. Anchors should always be inspected and replaced after being exposed to a fall.

Anchor Material: Unspecified

Loading...

Galvanized

Loading...

Steel

Loading...

Webbed-Strap Choker Anchors

Webbed-Strap Choker Anchors
These webbed-strap choker anchors wrap around structural pipe and scaffolding to provide a tie-off point for an SRL or lanyard that's part of a personal fall protection system. These anchors have a nylon loop with a D-ring on one end. The anchor wraps around a pipe or scaffold and the D-ring is passed through to secure the anchor point. The SRL or lanyard is then connected to the D-ring. These anchors are removed when the work is complete and can be reused in other locations. Anchors should always be inspected and replaced after being exposed to a fall.

Polyester

Loading...

Steel

Loading...

Hot Work Webbed-Strap Choker Anchors

Hot Work Webbed-Strap Choker Anchors
These webbed-strap choker anchors resist damage when exposed to heat and sparks caused hot work such as welding and grinding. Webbed-strap choker anchors are wrapped around structural pipe and scaffolding to provide a tie-off point for an SRL or lanyard that's part of a personal fall protection system. These anchors have a nylon loop with a D-ring on one end. The anchor is wrapped around a pipe or scaffold and the D-ring is passed through to secure the anchor point. The SRL or lanyard is then connected to the D-ring. These anchors are removed when the work is complete and can be reused in other locations. Anchors should always be inspected and replaced after being exposed to a fall.

Kevlar®

Loading...

Nomex

Loading...

Arc-Flash Rated Webbed-Strap Choker Anchors

Arc-Flash Rated Webbed-Strap Choker Anchors
These arc-flash rated webbed strap choker anchors are tested to ensure they won't burn, melt, or conduct energy when an arc flash occurs. Webbed-strap choker anchors are wrapped around structural pipe and scaffolding to provide a tie-off point for an SRL or lanyard that's part of a personal fall protection system. These anchors have a nylon loop with a D-ring on one end. The anchor is wrapped around a pipe or scaffold and the D-ring is passed through to secure the anchor point. The SRL or lanyard is then connected to the D-ring. These anchors are removed when the work is complete and can be reused in other locations. Anchors should always be inspected and replaced after being exposed to a fall.

Nomex

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.