Navigation Menu New

Access My Account, Order History, Lists and more here.

Strap & Cable Anchors

Available21 products

Strap and cable anchors provide a reusable anchor point to connect a lanyard or self-retracting lifeline (SRL) as part of a personal fall protection system when working at height. They have a loop or ring around each end so they wrap around structural components when the structural component is exposed on all sides. They are often wrapped around beams in new construction. These anchors can be used where space is limited or where clamps cannot be used.

Overall Length

Webbed-Strap Pass-Through Anchors

Webbed-Strap Pass-Through Anchors
Webbed-strap pass-through anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors can be removed and reused as needed.

No Wear Pad Included

Loading...

Wear Pad Included

Loading...

Hot Work Webbed-Strap Pass-Through Anchors

Hot Work Webbed-Strap Pass-Through Anchors

Hot work webbed-strap pass-through anchors resist damage when exposed to heat and sparks caused by hot work such as welding and grinding. Webbed-strap pass-through anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors can be removed and reused as needed.

No Wear Pad Included

Loading...

Cable Pass-Through Anchors

Cable Pass-Through Anchors

Cable pass-through anchors wrap around a beam, pipe, framing, or other structural component. Cable anchors are stronger and more durable than webbed-strap anchors and won't rip when exposed to sharp edges. The anchors have a large ring on one end that allows the other end to be passed through, then lanyard or SRL is then attached. These anchors can be removed and reused as needed.

Loading...

Extended-Reach Kits for Webbed-Strap Pass-Through Anchors

Extended-Reach Kits for Webbed-Strap Pass-Through Anchors
Extended-reach kits include a pole and other components used to install pass-though anchors to locations that can't be reached from the ground without requiring a ladder or other lift device. The adjustable pole is used to install and remove a webbed-strap pass-through anchor. Webbed-strap pass-through anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors can be removed and reused as needed.
Loading...

Cable Tie-Off Anchors

Cable Tie-Off Anchors
Cable tie-off anchors wrap around a beam, pipe, framing, or other structural component. Cable anchors are stronger and more durable than webbed-strap anchors and won't rip when exposed to sharp edges. They can be removed and reused as needed.

No Wear Pad Included

Loading...

Wear Pad Included

Loading...

Webbed-Strap Choker Anchors

Webbed-Strap Choker Anchors
Webbed-strap choker anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors are removed when the work is complete and can be reused in other locations.
Loading...

Arc-Flash Rated Webbed-Strap Choker Anchors

Arc-Flash Rated Webbed-Strap Choker Anchors
Arc-flash rated webbed-strap choker anchors won't burn, melt, or conduct energy when an arc flash occurs. Webbed-strap choker anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors are removed when the work is complete and can be reused in other locations.
Loading...

Hot Work Webbed-Strap Choker Anchors

Hot Work Webbed-Strap Choker Anchors

Hot work webbed-strap choker anchors resist damage when exposed to heat and sparks caused by hot work, such as welding and grinding. Webbed-strap choker anchors have a large ring on one end that allows the D-ring to be passed through, the lanyard or SRL is then attached to the D-ring. These anchors are removed when the work is complete and can be reused in other locations.

Loading...

Webbed-Strap Slip-On Anchors

Webbed-Strap Slip-On Anchors
Webbed-strap slip-on anchors have a closed loop on the end that encircles a structural component. A D-ring on the other end serves as a connection point for an SRL or lanyard. The strap is cut to remove the anchor when it is no longer needed. These anchors are commonly used in residential construction.
Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.