Skip Content

Want to pay an invoice? Please call us at 1-800-GRAINGER (1-800-472-4643).

Push to Connect Tube Fittings and Accessories

87 results found that include 1,393 products

Filter Results By

Results per page:  16 | 32 | 48
  • Metal Couplings

    Metal Couplings
  • Multiple product options available

    These dezincification-resistant brass couplings are designed to easily connect copper, CPVC, and PEX in any combination without the use of glue, soldering, or unions. Certified for use in potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • TM

    Grainger Choice

  • Metal Adapters

    Metal Adapters
  • Multiple product options available

    Designed for use with push-to-connect fittings, these adapters help to create quick and easy connections in a variety of applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal 90 Degree Elbows

    Metal 90 Degree Elbows
  • Multiple product options available

    Available in 316 stainless steel, brass, chrome-plated DZR brass, DZR brass, and nickel-plated brass, these push-to-connect elbows help to create quick and easy connections in a variety of applications. Elbows are removable and reusable, and require no soldering for installation.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal End Stops

    Metal End Stops
  • Multiple product options available

    These metal end stops feature dezincification-resistant (DZR) brass construction and are designed to easily connect copper, CPVC, and PEX in any combination without the use of glue, soldering, or unions. EPDM gasket material.Certified for use in potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Connectors

    Metal Connectors
  • Multiple product options available

    These metal connectors are designed for low-pressure circuits where fast assembly, disassembly, and reassembly are important. They are easy to install, connect, and disconnect. Compact, 1-pc., nickel-plated brass fittings are ideal for polyethylene, nylon, or polyurethane tubing. The high-phosphorus chemical nickel plating helps resist abrasion, chemicals, and corrosion.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Adapters

    Plastic Adapters
  • Multiple product options available

    These plastic adapters help create leakproof connections with various materials. They offer toolless installation, which is ideal for tight spaces. Suitable for cold and hot water distribution.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Tees

    Metal Tees
  • Multiple product options available

    Designed for use on all pneumatic circuits, these metal tees feature a quick connect/disconnect positive seal design. The With push-to-connect installation, they require no special tools. Use with nylon, polyethylene, and polyurethane tubing in air, water, and oil applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Connectors

    Plastic Connectors
  • Multiple product options available

    Create a leakproof connection with copper, CPVC, and PEX tubing when using these plastic connectors. CTS Twist-and-Lock Fittings are suitable for cold and hot water distribution, potable water distribution, and hydronic heating systems. TrueSeal™ Kynar® Push-In Fittings are ideal for hot beverage and soft drink dispensing systems, water coolers, and reverse osmosis systems. LIQUIfit Bio-Based Nylon Push-To-Connect Fittings are suitable for car washing, water purification, reverse osmosis, milk and dairy, and potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Unions

    Metal Unions
  • Multiple product options available

    These push-to-connect fittings are lightweight, compact, and suitable for use with polyethylene, nylon, or polyurethane tubing. Use where fast assembly, disassembly, and reassembly are desired.

    WARNING: For use only with air, water, oil, and nonreactive gases. Do not use where accidental separation of tube and fitting could cause injury. Not recommended for continuous-pressure cycling applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Branch Tees

    Metal Branch Tees
  • Multiple product options available

    These push-to-connect branch tees help to create quick and easy connections in a variety of applications. They are ideal for low-pressure circuits where fast assembly, disassembly, and reassembly are important. Push-in design requires no special tools.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Slip Couplings

    Metal Slip Couplings
  • Multiple product options available

    These dezincification-resistant brass fittings are designed to easily connect copper, CPVC, and PEX in any combination without the use of glue, soldering, or unions. EPDM gasket material. Certified for use in potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic 90 Degree Elbows

    Plastic 90 Degree Elbows
  • Multiple product options available

    These elbows help create a leakproof connection with copper, CPVC, and PEX tubing. They offer toolless installation for convenience in tight spaces. Available in acetal copolymer, Kynar®, nylon, polybutylene, polypropylene, and polysulfone for a variety of applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Reducing Unions

    Plastic Reducing Unions
  • Multiple product options available

    Plastic reducing unions can help join larger tubes to smaller tubes. Gray Acetal Push-to-Connect Fittings are suitable for use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing in various applications, such as food, chemical, cleaning, and beverage dispensing. Polypropylene Push-In Fittings are compatible with LDPE, HDPE, and polypropylene tubing in potable water and food applications, as well as in chemical plants, cleaning applications, and water purification systems. They can be used in beverage dispensing, reverse osmosis, car wash, and fiber optic applications. FDA approved.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Plugs

    Plastic Plugs
  • Multiple product options available

    Seal off tubing with these plastic plugs. TrueSeal™ Kynar® Push-In Fittings are ideal for hot beverage and soft drink dispensing systems, water coolers, and reverse osmosis systems. Gray Acetal Push-to-Connect Fittings are suitable for use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing in various applications, such as food, chemical, cleaning, and beverage dispensing. LIQUIfit Bio-Based Nylon Push-To-Connect Fittings are suitable for car washing, water purification, reverse osmosis, milk and dairy, and potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Reducing Couplings

    Metal Reducing Couplings
  • Multiple product options available

    These reducing couplings allow you to reduce fittings down to a smaller diameter. The fittings feature push-to-connect design on one side, and a copper tube sized (CTS) insert on the other side. The CTS side fits into other compatible fittings (available separately), allowing you to reduce pipe sizes if necessary.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Dividers

    Plastic Dividers
  • Multiple product options available

    Plastic Wye Dividers help to split the flow of liquids into two paths. Gray Acetal Push-to-Connect Fittings are suitable for PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing. Use with potable water, food, chemical, cleaning, and beverage dispensing applications, as well as pneumatics, reverse osmosis, plumbing, spraying and misting, compressed air, and fiber optics. FDA and NSF Approved.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Push To Connect Fittings Kit

    Push To Connect Fittings Kit
  • Multiple product options available

    Comes with commonly used push-fit fittings that can connect in seconds with no glue, solder, or clamping. Tube fittings are certified low lead compliant and for use in potable water applications. For residential and commercial whole-house installations, water heater repairs, and sillcock or water filter replacement.

    Multiple product options available

  • Category : Push to Connect Tube Fitting Kits
  • Plastic Unions

    Plastic Unions
  • Multiple product options available

    Join 2 lengths of tubing with these plastic unions. LIQUIfit Bio-Based Nylon Push-To-Connect Fittings are suitable for car washing, water purification, reverse osmosis, milk and dairy, and potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Run Tees

    Plastic Run Tees
  • Multiple product options available

    Run tees feature a female connection at one end of the branch, and a male connection at the other. TrueSeal™ Kynar® Push-In Fittings are ideal for hot beverage and soft drink dispensing systems, water coolers, and reverse osmosis systems. Gray Acetal Push-to-Connect Fittings are suitable for use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing in various applications, such as food, chemical, cleaning, and beverage dispensing.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Reducing Tees

    Plastic Reducing Tees
  • Multiple product options available

    Plastic reducing tees can help join a larger tube to 2 smaller tubes. CTS Twist-and-Lock Fittings are suitable for use with cold and hot water distribution, potable water distribution, and hydronic heating systems. Gray Acetal Push-to-Connect Fittings are suitable for use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing in various applications, such as food, chemical, cleaning, and beverage dispensing.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic 90 Degree Reducing Elbows

    Plastic 90 Degree Reducing Elbows
  • Multiple product options available

    CTS Twist-and-Lock Fittings create a leakproof connection with copper, CPVC, and PEX tubing. They provide toolless installation, which is ideal for tight spaces. Suitable for cold and hot water distribution, potable water distribution, and hydronic heating systems.

    Gray Acetal Push-In Fittings have nitrile O-ring seals and stainless steel teeth. They are designed for use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing. Fittings are suitable for potable water, food, chemical, cleaning, and beverage dispensing applications, as well as pneumatics, reverse osmosis, plumbing, spraying and misting, compressed air, and fiber optics.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic Tees

    Plastic Tees
  • Multiple product options available

    Plastic tees can either allow 2 tubes to flow into 1, or 1 tube to flow into 2. Polysulfone Push-Fit Fittings install without tools or locking clips. They are reusable and compatible with metallic to soft vinyl tubing including copper, CPVC, and PEX. Certified for use in potable water applications. CTS Twist-and-Lock Fittings are suitable for use with cold and hot water distribution, potable water distribution, and hydronic heating systems.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Plastic End Stops

    Plastic End Stops
  • Multiple product options available

    Close the end of your tubing with these plastic end stops. Polysulfone Quick-Connect Fittings Connect quickly and easily, without tools. They are compatible with PEX, LDPE, MDPE, HDPE, copper, CTS CPVC, and polybutylene tubing in low-pressure fluid applications. Gray Acetal Push-to-Connect Fittings are suitable for use with PVC, polyethylene, nylon, polyurethane, brass, copper, and mild steel tubing in various applications, such as food, chemical, cleaning, and beverage dispensing.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
  • Metal Ball Valves

    Metal Ball Valves
  • Multiple product options available

    These metal ball valves are designed to provide easy-to-install connections that require no clamps, glue, soldering, tools, or unions. The full-port design allows water to flow easily through the valve. Certified for use in potable water applications.

    Multiple product options available

  • Category : Push to Connect Tube Fittings
Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More