Featuring an industry-standard footprint, these extruded cylinders allow interchangeability with other NFPA-style cylinders of either tie-rod or extruded construction. Advantages include a clean appearance and fewer spaces for dirt and debris to collect. The cushions are standard and adjustable at both ends on 7" and larger stroke lengths.

• Max. operating pressure: 250 psi
• Operating temp. range: -10° to 165°F

For use in applications where a magnetic sensing piston is not required, these cylinders can withstand a wide range of operating environments, tolerating moisture and many types of lubricants and solvents. They're dimensionally interchangeable with Bimba, Norgren, and SMC cylinders.

• Max. operating pressure: 250 psi (17.23 bar)
• Operating temp. range: -10° to 165°F

These permanently lubricated, nonrepairable cylinders are dimensionally interchangeable with a number of manufacturers' cylinders. The chrome-plated carbon steel piston rod and stainless steel tube provide corrosion resistance. The piston magnet allows autoswitches to sense the stroke piston. NPT ports.

• Operating pressure range: 8 to 250 psi
• Operating temp. range: 40° to 140°F

Designed with stainless steel tie rods, these pneumatic cylinders provide superior corrosion resistance. They're dimensionally interchangeable with Bimba and Parker cylinders.

• Operating pressure range: 15 to 200 psi
• Temp. range: 0° to 180°F

Made from corrosion-resistant aluminum, these rodless cylinders require 50% less operating space than typical piston rod-type cylinders because the stroke is contained within its own envelope. Standard adjustable cushions decelerate the load at the end of the stroke. Mount vertically or horizontally, using pretapped holes in the end caps. Optional foot mounting hardware is available separately to bolt the cylinder firmly in place.

• Max. operating pressure: 116 psi
• Ambient temp. range: -22° to 176°F

For use in applications where a magnetic sensing piston is not required, these cylinders can withstand a wide range of operating environments, tolerating moisture and many types of lubricants and solvents. They're dimensionally interchangeable with Bimba, Norgren, and SMC cylinders.

• Max. operating pressure: 250 psi (17.23 bar)
• Operating temp. range: -10° to 165°F

Made from corrosion-resistant aluminum, these rodless cylinders require 50% less operating space than typical piston rod-type cylinders because the stroke is contained within its own envelope. Standard adjustable cushions decelerate the load at the end of the stroke. Mount vertically or horizontally, using pretapped holes in the end caps. Optional foot mounting hardware is available separately to bolt the cylinder firmly in place.

• Max. operating pressure: 116 psi
• Ambient temp. range: -22° to 176°F

Well-suited for caustic and washdown applications, these factory-lubricated units are easy to maintain and repair. They're bottom tapped for MS4 and NFPA mounting, and they have adjustable cushions. The industry standard footprint allows these cylinders to be interchanged with other NFPA tie-rod cylinders.

• Max. operating pressure: 250 psi
• Operating temp. range: 0° to 185°F

These permanently lubricated, nonrepairable cylinders are dimensionally interchangeable with a variety of manufacturers' cylinders. The chrome-plated carbon steel piston rod and stainless steel tube provide corrosion resistance. The piston magnet allows autoswitches to sense the stroke piston. NPT ports.

• Operating pressure range: 25 to 250 psi
• Operating temp. range: 40° to 140°F

Well-suited for caustic and washdown applications, these factory-lubricated units are easy to maintain and repair. They're bottom tapped for MS4 and NFPA mounting, and they have adjustable cushions. The industry standard footprint allows these cylinders to be interchanged with other NFPA tie-rod cylinders.

• Max. operating pressure: 250 psi
• Operating temp. range: 0° to 185°F

Manufactured without the use of copper, PTFE, or silicone, these permanently lubricated extruded cylinders have a cleaner appearance and fewer places for dirt and debris to collect. Their industry-standard footprint allows exchange with other tie-rod or extruded ISO-style cylinders. The head and caps are made of anodized high-pressure cast-aluminum.

• Max. operating pressure: 145 psi
• Operating temp. range: -4° to 176°F

These permanently lubricated, double-acting cylinders have ISO dimensions, allowing them to be interchanged with other round-body cylinders that meet the same standards. Optional piston magnets for autoswitches and seal kits (for 20, 25, 32, and 40mm bore sizes) are available separately.

• Max. operating pressure: 145 psi
• Operating temp. range: 14° to 140°F
• 8 to 16mm bore are nonrepairable; 20 to 40mm bore are repairable
• 8 to 16mm bore have stainless steel rods; 20 to 40mm bore have chrome-plated, carbon steel rods

These permanently lubricated, double-acting cylinders have ISO dimensions, allowing them to be interchanged with other round-body cylinders that meet the same standards. Optional piston magnets for autoswitches and seal kits (for 20, 25, 32, and 40mm bore sizes) are available separately.

• Max. operating pressure: 145 psi
• Operating temp. range: 14° to 140°F
• 8 to 16mm bore are nonrepairable; 20 to 40mm bore are repairable
• 8 to 16mm bore have stainless steel rods; 20 to 40mm bore have chrome-plated, carbon steel rods

Well-suited for caustic and washdown applications, these factory-lubricated units are easy to maintain and repair. They're bottom tapped for MS4 and NFPA mounting, and they have adjustable cushions. The industry standard footprint allows these cylinders to be interchanged with other NFPA tie-rod cylinders.

• Max. operating pressure: 250 psi
• Operating temp. range: 0° to 185°F

Providing superior corrosion resistance, these cylinders have an aluminum barrel, a polished, chrome-plated stainless steel piston rod, and stainless steel tie-rods. They're dimensionally interchangeable with Bimba and Parker cylinders.

• Operating pressure range: 15 to 200 psi
• Temp. range: 0° to 180°F

These permanently lubricated, nonrepairable cylinders are dimensionally interchangeable with a variety of manufacturers' cylinders. The chrome-plated carbon steel piston rod and stainless steel tube provide corrosion resistance. The piston magnet allows autoswitches to sense the stroke piston. Additional features include NPT ports, rubber bumpers, and spring return.

• Operating pressure range: 25 to 250 psi
• Operating temp. range: 40° to 140°F

Lubricated for life, these pneumatic cylinders feature ISO standard dimensions that allow interchangeability with other tie-rod cylinders of this standard. The piston magnet allows the autoswitches to sense stroke position.

• Max. operating pressure: 145 psi
• Min. operating pressure: 8 psi
Operating temp. range: 14° to 140°F

Providing superior corrosion resistance, these cylinders have an aluminum barrel, a polished, chrome-plated stainless steel piston rod, and stainless steel tie-rods. They're dimensionally interchangeable with Bimba and Parker cylinders.

• Operating pressure range: 15 to 200 psi
• Temp. range: 0° to 180°F

These permanently lubricated, nonrepairable cylinders are dimensionally interchangeable with a variety of manufacturers' cylinders. The chrome-plated carbon steel piston rod and stainless steel tube provide corrosion resistance. The piston magnet allows autoswitches to sense the stroke piston. Additional features include NPT ports, rubber bumpers, and spring return.

• Operating pressure range: 25 to 250 psi
• Operating temp. range: 40° to 140°F

These permanently lubricated cylinders are magnetically coupled. A soft wiper with special resin provides ideal lubrication on the cylinder outside tube. NPT ports.

• Max. operating pressure: 102 psi
• Min. operating pressure: 22 psi
• Operating temp. range: 14° to 140°F

Designed for use in clean environments during food handling and medical applications, these permanently lubricated, double-acting cylinders are constructed with all stainless steel external parts. Rod scrapers are included for washdown applications. Optional piston magnets are available separately for autoswitches.

• Max. operating pressure: 145 psi
• Min. operating pressure: 8 psi
• Operating temp. range: 14° to 140°F