- Catalog
- Find A Branch
- KeepStock
- Help
- 1-800-GRAINGER
All Products
Unrelated Links
Product Categories
- All Product Categories
- Abrasives
- Adhesives, Sealants and Tape
- Cleaning and Janitorial
- Electrical
- Electronics, Appliances, and Batteries
- Fasteners
- Fleet and Vehicle Maintenance
- Furniture, Hospitality and Food Service
- HVAC and Refrigeration
- Hardware
- Hydraulics
- Lab Supplies
- Lighting
- Lubrication
- Machining
- Material Handling
- Motors
- Office Supplies
- Outdoor Equipment
- Packaging & Shipping
- Paint, Equipment and Supplies
- Pipe, Hose, Tube & Fittings
- Plumbing
- Pneumatics
- Power Transmission
- Pumps
- Raw Materials
- Reference and Learning Supplies
- Safety
- Security
- Test Instruments
- Tools
- Welding
Motors are electrical devices that convert electrical energy into mechanical energy. They operate through the interaction between the motor's magnetic field and electric current in a wire winding to generate force in the form of torque applied on the motor's shaft. Motors can be powered by direct current (DC) from a battery or by alternating current (AC) from an electrical power grid or electrical generator.
-
NEMA 180 Frame 3-Phase NEMA Frame General Purpose AC Motors
Purchased productsNEMA 180 frame three-phase general purpose AC motors have a standard 1-1/8" diameter, 2-3/4" length shaft whose center is 4-1/2" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 182TCH. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, “C” indicates that the motor can be face mounted, and “H” indicates that the frame has a set of mounting holes at 3" and 5". These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 56 Frame 3-Phase NEMA Frame General Purpose AC Motors
Purchased productsNEMA 56 frame three-phase general purpose AC motors have a standard 5/8" diameter, 1-7/8" length shaft whose center is 3-1/2" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter “H” indicates that the frame has a set of mounting holes at 3" and 5", “Z” indicates that the frame has a nonstandard shaft, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 210 Frame 3-Phase NEMA Frame General Purpose AC Motors
Purchased productsNEMA 210 frame three-phase general purpose AC motors have a standard 1-3/8" diameter, 3-3/8" length shaft whose center is 5-1/4" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 213TCV. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, “C” indicates that the motor can be face mounted, and “V” indicates that the motor can be vertically mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 140 Frame 3-Phase NEMA Frame General Purpose AC Motors
Purchased productsNEMA 140 frame three-phase general purpose AC motors have a standard 7/8" diameter, 2-1/4" length shaft whose center is 3-1/2" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 143T or 145TC. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 56 Frame Capacitor-Start General Purpose AC Motors
Purchased productsNEMA 56 frame capacitor-start general purpose AC motors have a standard 5/8" diameter, 1-7/8" length shaft whose center is 3-1/2" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 56Z or 56HC. The letter “Z” indicates that the frame has a nonstandard shaft, “H” indicates that the frame has a set of mounting holes at 3" and 5", and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 48 Frame Capacitor-Start General Purpose AC Motors
Purchased productsNEMA 48 frame capacitor-start general purpose AC motors have a standard 1/2" diameter, 1-1/2" length shaft whose center is 3" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 48Z. The letter “Z” indicates that the frame has a nonstandard shaft. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 180 Frame Capacitor-Start General Purpose AC Motors
Purchased productsNEMA 180 frame capacitor-start general purpose AC motors have a standard 1-1/8" diameter, 2-3/4" length shaft whose center is 4-1/2" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 184TC. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 140 Frame Capacitor-Start General Purpose AC Motors
Purchased productsNEMA 140 frame capacitor-start general purpose AC motors have a standard 7/8" diameter, 2-1/4" length shaft whose center is 3-1/2" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 145TC. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 48 Frame 3-Phase NEMA Frame General Purpose AC Motors
Purchased productsNEMA 48 frame three-phase general purpose AC motors have a standard 1/2" diameter, 1-1/2" length shaft whose center is 3" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 56 Frame Capacitor-Start/Run General Purpose AC Motors
Purchased productsNEMA 56 frame capacitor-start/run general purpose AC motors have a standard 5/8" diameter, 1-7/8" length shaft whose center is 3-1/2" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 56HZ or 56C. The letter “H” indicates that the frame has a set of mounting holes at 3" and 5", “Z” indicates that the frame has a nonstandard shaft, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 210 Frame Capacitor-Start General Purpose AC Motors
Purchased productsNEMA 210 frame capacitor-start general purpose AC motors have a standard 1-3/8" diameter, 3-3/8" length shaft whose center is 5-1/4" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 215TC. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 42 Frame Capacitor-Start/Run General Purpose AC Motors
Purchased productsNEMA 42 frame capacitor-start/run general purpose AC motors have a standard 3/8" diameter, 1-1/8" length shaft whose center is 2-5/8" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 140 Frame Capacitor-Start/Run General Purpose AC Motors
Purchased productsNEMA 140 frame capacitor-start/run general purpose AC motors have a standard 7/8" diameter, 2-1/4" length shaft whose center is 3-1/2" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 145TC. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 180 Frame Capacitor-Start/Run General Purpose AC Motors
Purchased productsNEMA 180 frame capacitor-start/run general purpose AC motors have a standard 1-1/8" diameter, 2-3/4" length shaft whose center is 4-1/2" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 184TC. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 42 Frame Capacitor-Start General Purpose AC Motors
Purchased productsNEMA 42 frame capacitor-start general purpose AC motors have a standard 3/8" diameter, 1-1/8" length shaft whose center is 2-5/8" above the base mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 42CZ. The letter “C” indicates that the motor can be face mounted and “Z” indicates that the frame has a nonstandard shaft. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 250 Frame 3-Phase NEMA Frame General Purpose AC Motors
Purchased productsNEMA 250 frame three-phase general purpose AC motors have a standard 1-5/8" diameter, 4" length shaft whose center is 6-1/4" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 256TC or 254/6U. The letters “T” or “U” specify integral HP motor dimension standards set by NEMA in 1953 and 1964, and “C” indicates that the motor can be face mounted. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
-
NEMA 210 Frame Capacitor-Start/Run General Purpose AC Motors
Purchased productsNEMA 210 frame capacitor-start/run general purpose AC motors have a standard 1-3/8" diameter, 3-3/8" length shaft whose center is 5-1/4" above the mounting surface. Variations to the frame's standard dimensions and design are indicated by a letter designation following the frame number, such as 215T. The letter “T” specifies integral HP motor dimension standards set by NEMA in 1953 and 1964. These frame standards and letter designations are defined by the National Electrical Manufacturers Association (NEMA).Brands
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.