Skip Content

Motor Mounting Bases

7 results found that include 75 products

Filter Results By

Branch Availability
Item
For NEMA Frame
Length (In.)
Width (In.)
Height (In.)
Brand
Price
Shop By
Results per page:  16 | 32 | 48
Adjustable Steel Motor Bases
  • TM

    Grainger Choice

  • Multiple product options available

    Use an adjustable steel motor base to position a mounted motor for proper belt tension during initial installation and at later maintenance checks.Note: Not for ceiling or side wall installations.

    Multiple product options available

Non-Adjustable Motor Bases
  • TM

    Grainger Choice

  • Multiple product options available

    Use these bases to mount shaded-pole and permanent split-capacitor ring-mount motors in direct-drive heating and air conditioning applications. Mounting latches are included.

    Multiple product options available

Adjustable Side Rails
  • TM

    Grainger Choice

  • Multiple product options available

    Use these slide rails to position mounted NEMA and NEC motors for proper belt tension during installation and at later maintenance checks. They're suitable for motor belt adjustments in fan, blower, pump, and compressor applications. Note: Not for ceiling or side wall installations.

    Multiple product options available

Non-Adjustable Automatic Motor Bases
  • TM

    Grainger Choice

  • Multiple product options available

    Suitable for use in blower, compressor, fan, mixer, and pump applications, these bases adjust belt tension automatically while the motor is in use. They're ideal for difficult-to-access motors, maintaining proper belt tension to help reduce operating stress and increase the life of belts and bearings.

    Multiple product options available

Adjustable Pivot Bases
  • TM

    Grainger Choice

  • Multiple product options available

    Use these bases to tension motor belts where the motor is above or below the drive unit. They allow easy access to adjustment screws on top of the plate. Belt tension can be adjusted without loosening the motor hold-down bolts. Alignment is maintained when changing belts. These bases are suitable for blower, compressor, fan, mixer, and pump applications where belt adjustment is required. Note: Not for ceiling or side wall installations.

    Multiple product options available

Strap-Type Motor Mounting Base,1-3/8 Length (In.),4 Wi
Strap-Type Motor Mounting Bases
  • TM

    Grainger Choice

  • DAYTON
  • Use these sturdy steel bases to mount vibrator motor Nos. 10C903 and 5FTT3, available separately.

  • Item # 10C904
  • Mfr. Model # 10C904
  • Strap-Type Motor Mounting Base, Height 4-1/8 In., Width 4 In., Length 1-3/8 In., Bolt Size 3/8 In., Motor...More

Resilient Ring Mounting Bases
  • Multiple product options available

    Use these bases to mount shaded-pole and permanent split-capacitor ring-mount motors in direct-drive heating and air conditioning applications. Mounting latches are included.

    Multiple product options available

Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More