Navigation Menu New

Access My Account, Order History, Lists and more here.

Cart
All Products
Bulk Order
Cart

Standard Multi-Ply Conveyor Belting

Available30 products
Standard multi-ply conveyor belting is used to replace a worn or damaged belt on a conveyor to prevent belt malfunction and conveyor downtime. It can also be used to upgrade an existing belt on a conveyor to a belt that is better suited for a specific environment or application. Multi-ply conveyor belting (also called flat belting) consists of an internal layer of strong woven fabric surrounded by top and bottom covers that protect the inner layer. Mechanical fasteners (also known as belt lacing) or non-mechanical endless splicing techniques are used to join the ends of the belt and form a loop when installing the replacement conveyor belt on a conveyor.
Conveyor Belt Material

Oil-Resistant Multi-Ply Conveyor Belting

Oil-Resistant Multi-Ply Conveyor Belting
Oil-resistant multi-ply conveyor belting is made from materials that resist absorbing oils from the surrounding environment and the items on the conveyor belt. This reduces how often the belting will need to be replaced when used in manufacturing facilities and similar applications where it will be exposed to oil. Cut-to-length belting is ordered by the foot, and the smallest size that can be ordered is 15 ft.

Nitrile Rubber Belt Material with Buffed Top Surface and Buffed Bottom Surface

Loading...

Nitrile Rubber Belt Material with Friction Top Surface and Friction Bottom Surface

Loading...

Nitrile Rubber Belt Material with Smooth Top Surface and Bare Bottom Surface

Loading...

Nitrile Rubber Belt Material with Smooth Top Surface and Friction Bottom Surface

Loading...

Nitrile Rubber Belt Material with Smooth Top Surface and Smooth Bottom Surface

Loading...
Loading...

PVC Belt Material with Cover Top Surface and Friction Bottom Surface

Loading...

Polyester Belt Material with Buffed Top Surface and Buffed Bottom Surface

Loading...

Polyester Belt Material with Cover Top Surface and Cover Bottom Surface

Loading...

Polyester Belt Material with Friction Top Surface and Friction Bottom Surface

Loading...

Polyester Belt Material with Pebbletop Top Surface and Bare Bottom Surface

Loading...

Polyester Belt Material with Waffle Top Top Surface and Bare Bottom Surface

Loading...

RMV Belt Material with Smooth Top Surface and Bare Bottom Surface

Loading...

RMV Belt Material with Smooth Top Surface and Friction Bottom Surface

Loading...

Spun Polyester Belt Material with Smooth Top Surface and Friction Bottom Surface

Loading...

Low-Friction Multi-Ply Conveyor Belting

Low-Friction Multi-Ply Conveyor Belting
The slippery coating on this multi-ply conveyor belting reduces friction between the belt surface and the items being conveyed on it so items can slide freely on the belt's surface. Low-friction belting is used in applications where conveyed items will be allowed to accumulate on the conveyor belt to control flow. The belt slides under the items as they accumulate without damaging them. Items can also slide across the belting if they need to be diverted or deflected off the belt onto a spur line. This belting is sold in pre-cut or cut-to-length sizes. Cut-to-length belting is ordered by the foot, and the smallest size that can be ordered is 15 ft.

Nitrile Rubber Belt Material with Bare Top Surface and Friction Bottom Surface

Loading...

PVC Belt Material with Friction Top Surface and Friction Bottom Surface

Loading...

Polyester Belt Material with Cover Top Surface and Cover Bottom Surface

Loading...

SBR Rubber Belt Material with Bare Top Surface and Friction Bottom Surface

Loading...

Spun Polyester Belt Material with Friction Top Surface and Brushed Bottom Surface

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.