Navigation Menu New

Access My Account, Order History, Lists and more here.

Dimmable Fluorescent Ballasts

1 product
Dimmable fluorescent ballasts are compatible with dimming switches and other lighting controls that turn lights on or off and allow the light output to be dimmed. They are used in fluorescent lighting fixtures in conference rooms, schools, and other areas where lights will occasionally be lowered for presentations or to conserve energy. Dimming ballasts and lighting controls must use the same dimming method and dimming type in order to work together. Ballasts protect light bulbs from damaging power fluctuations that can reduce the quality of the bulbs' light output. They provide an initial spike of high voltage to turn on light bulbs and then regulate the current to the bulbs for as long as they are on. Replacement ballasts should have the same voltage and start type as the old ballast, be able to power the number and type of bulbs that are used in the fixture, and be capable of fitting into the fixture.
Ballast Factor

0-10V Continuous Dimmable Fluorescent Ballasts

0-10V Continuous Dimmable Fluorescent Ballasts
These continuous dimming ballasts are compatible with 0-10V continuous dimming controls and use a low-voltage analog control signal to dim the fixtures' light output to any output level between 100% light output and the ballasts' lowest light output setting. These ballasts are used in fluorescent lighting fixtures in a wide variety of settings, but may not be suitable for lighting systems where wires need to be run a long distance to connect the ballasts to the lighting controls.

Programmed Ballast Start Type

Loading...

Programmed/Rapid Ballast Start Type

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.