Hardware

Door Stop, Mounting Type Door Mount, Finish Satin Chrome, Projection 2 In., Length 4 In., Height 2-1/8 In., Width 1 In., Door Opening Adjustment 85 Degrees to 125 Degrees

Door Stop, Mounting Type Door Mount, Finish Satin Chrome, Projection 2 In., Length 4 In., Height 2-1/8 In.,...More

Template Hinge, Steel Material, 300.0 lb. Load Capacity, With Holes, 4 Holes per Leaf, 180 Degrees Range of Motion, 4-1/2 In. Door Leaf Height, 4-1/2 In. Frame Leaf Height, 1-23/32 In. Door Leaf Width, 1-23/32 In. Frame Leaf Width, 0.180 In. Door Leaf Thickness, 0.180 In. Frame Leaf Thickness, 2 In. Required Door Thickness, Flush Ball Bearing Type, Square Corners, Included Hardware, Full Mortise Mounting, 21/64 In. Pin Dia., Steel Pin Material, Nonremovable Pin Type, ANSI/BHMA Standards

Template Hinge, Steel Material, 300.0 lb. Load Capacity, With Holes, 4 Holes per Leaf, 180 Degrees Range of...More

Horseshoe Magnet, Material Alnico 5, Max. Pull 30 lb., Thickness 1.18 In., Overall Length 1-2/11 In., Overall Width 1-7/9 In., Hole Dia. 3/16 In., Stability Temp. 975 Degrees F, Includes Steel Keeper

Horseshoe Magnet, Material Alnico 5, Max. Pull 30 lb., Thickness 1.18 In., Overall Length 1-2/11 In., Overall...More

Plunger Door Holder, Base Dia. 11/16 In., Color Sliver, Satin Chrome Finish, Material Cast Zinc, Projection 1-1/4 In., Height 7-3/4 In., Width 1-5/8 In., Mounting Type Door-Mount, Tip Material Rubber, Hardware Included

Plunger Door Holder, Base Dia. 11/16 In., Color Sliver, Satin Chrome Finish, Material Cast Zinc, Projection...More

Offset Piano Hinge, Ligature Resistant No, Stainless Steel Material, 225 Degrees Range of Motion, Milled Stainless Steel Finish, Without Holes, 1/2 In. Overall Knuckle Height, 0.060 In. Door Leaf Thickness, 0.060 In. Frame Leaf Thickness, Not Included Hardware, 0 Holes per Leaf, Full Surface Mounting, 3/16 In. Pin Dia., Stainless Steel Pin Material, Nonremovable Pin Type

Offset Piano Hinge, Ligature Resistant No, Stainless Steel Material, 225 Degrees Range of Motion, Milled...More

Door Protection Plate, Kick/Stretcher, Height 8 In., Width 36 In., Dull Finish, Material Aluminum, Thickness 0.05 In., Hardware Included

Door Protection Plate, Kick/Stretcher, Height 8 In., Width 36 In., Dull Finish, Material Aluminum, Thickness...More

Plunger Door Holder, Color Silver, Satin Chrome Finish, Material Cast Brass, Projection 1-7/8 In., Height 5-3/8 In., Width 1-3/16 In., Mounting Type Wall-Mount, Tip Material Rubber, Hardware Included

Plunger Door Holder, Color Silver, Satin Chrome Finish, Material Cast Brass, Projection 1-7/8 In., Height...More

Door Latch Guard, Length 11 In., Width 3-3/32 In., Satin Stainless Steel Finish, Material Stainless Steel, For Use With Door Type Out Opening Doors, Hardware Included, For Use With Fits Deadbolts, And Door Locks Up To 3 1/2 In. Dia. (Not Notched)

Door Latch Guard, Length 11 In., Width 3-3/32 In., Satin Stainless Steel Finish, Material Stainless Steel,...More

Tarp, Tarp Material Polyethylene, Cut Size 15 x 20 ft., Thickness 3.2 mil, Color Blue, Seam Heat-Sealed with Polyethylene Rope-Lined Hems

Tarp, Tarp Material Polyethylene, Cut Size 15 x 20 ft., Thickness 3.2 mil, Color Blue, Seam Heat-Sealed with...More

Magnetic Door Holder, Satin Nickel Finish, Material Steel, Color Silver, Holder Base Height 1 In., Holder Base Width 1-3/4 In., Holder Projection 5/8 In., Strike Base Height 1 In., Strike Base Width 2 In., Strike Projection 3 In., Base Dia. 1-3/4 In., Magnetic Strength 15.4 lb., Mounting Type Wall, Hardware Included

Magnetic Door Holder, Satin Nickel Finish, Material Steel, Color Silver, Holder Base Height 1 In., Holder...More

Door Sweep, Door Sweep Type Brush, Flange Material Aluminum, Flange Height 1-1/2 In., Insert Size 7/16 In., Projection 9/16 In., Length 4 ft., Insert Material Nylon Brush, Insert Color Gray, Includes Drip Cap, Standards BHMA Certified

Door Sweep, Door Sweep Type Brush, Flange Material Aluminum, Flange Height 1-1/2 In., Insert Size 7/16 In.,...More

Angle Door Stop, Mounting Type Floor Mount, Finish Satin Chrome, Base Dia. 2-1/2 In., Projection 3 In., Height 3 In., Width 2-1/2 In., Door Opening Adjustment 85 Degrees to 125 Degrees

Angle Door Stop, Mounting Type Floor Mount, Finish Satin Chrome, Base Dia. 2-1/2 In., Projection 3 In.,...More

Double Door Weatherstrip, Insert Type Nylon Brush, Insert Material Nylon Brush, Insert Size 7/16 In., Flange Material Anodized Aluminum, Flange Width 5/8 In., Flange Thickness 3/64 In., Overall Length 7 ft., Stays Flexible to Degrees , Projection 1/4 In., Max. Door Gap 1/4 In., Sold As Strip

Double Door Weatherstrip, Insert Type Nylon Brush, Insert Material Nylon Brush, Insert Size 7/16 In., Flange...More

O-Ring Assortment, SAE, Material Buna N, Number of Pieces 382, Number of Sizes 30, Durometer 70 Shore A, Hardness Medium Hard, Sizes Included Inner Dia. Sizes 1/8 In. to 1-3/4 In., Case Type Plastic Box, Temp. Range -40 Degrees to 250 Degrees F, Color Black

O-Ring Assortment, SAE, Material Buna N, Number of Pieces 382, Number of Sizes 30, Durometer 70 Shore A,...More

Magnetic Door Holder, Chrome Finish, Material Steel, Color Silver, Holder Base Height 1 In., Holder Base Width 1-3/4 In., Holder Projection 5/8 In., Strike Base Height 1 In., Strike Base Width 2 In., Strike Projection 3 In., Base Dia. 1-3/4 In., Magnetic Strength 15.4 lb., Mounting Type Wall, Hardware Included

Magnetic Door Holder, Chrome Finish, Material Steel, Color Silver, Holder Base Height 1 In., Holder Base...More

Hinged Door Track Hanger, Size 2 1/8 Inches, Finish US2C-Bright Zinc, For Doors Weighing up to 450 Pounds, Application Sliding Doors, Ball Bearing, Wheel Diameter 2 1/8 Inches, Number of Wheels 2, Height 5 1/2 Inches, Width 3 1/4 Inches, Construction Steel, Includes Hardware

Hinged Door Track Hanger, Size 2 1/8 Inches, Finish US2C-Bright Zinc, For Doors Weighing up to 450 Pounds,...More

Pallet Cover Tarp, Tarp Material Woven Polyethylene, Finished Size 4 ft. x 4 ft. x 6 ft., Thickness 10.5 mil, Color Silver/Black, Seam Sewn, Features 5-Sided

Pallet Cover Tarp, Tarp Material Woven Polyethylene, Finished Size 4 ft. x 4 ft. x 6 ft., Thickness 10.5 mil,...More

Sliding Door or Window Lock, Operation Type Key Operated, Length 1-57/64 In., Width 1-3/4 In., Height 63/64 In., Aluminum Finish, Material Zinc, Hardware Included, Includes Keys

Sliding Door or Window Lock, Operation Type Key Operated, Length 1-57/64 In., Width 1-3/4 In., Height 63/64...More