Strut Channel Hangers & Clamps for Conduit, Pipe & Cable
These hangers and clamps slip onto the lip of top-opening strut channel to attach conduit, pipe, and cable. They provide structural support and help keep material organized. .
Conduit clamps have a narrow profile, so even when they're installed side by side, the clamping screws remain accessible. They're ideal for routing conduit across strut channel in cramped, tight spaces. These clamps slide into the strut channel and are secured by tightening the clamping screw.
Conduit Clamps Galvanized Steel, sorted by Conduit Trade Size, custom
Angler pipe clamps have an angled bracket that allows installers to reach the bolt with a screwdriver or power tool even when clamps are side by side, so they're ideal for tight installations. These clamps route pipe across strut channel. They slide into the channel and are secured by tightening the screw.
These cushion clamps secure conduit and insulated pipe to strut channel without pinching. They also have a plastic insert that creates a seal around the pipe insulation to prevent the pipe from sweating, which can cause mold and corrosion. The clamp slides into the strut channel, the pipe or conduit is inserted, and the clamping screw is tightened to secure.
These clamps support and stabilize vertical runs of thin-wall EMT metal conduit and pipe along strut channel. They position around the conduit or pipe and tighten down with a screw on either side. They rest on a floor or other horizontal surface, which supports the legs on each end of the clamp.