Skip Content

CPVC Pipe

4 results found that include 100 products

Filter Results By

Viewing as

List Table
  • 1/2" x 10 ft. CPVC Pipe, Pipe Schedule SDR 1
    Schedule SDR 11 CPVC Pipe, Non-Threaded
    • TM

      Grainger Choice

    • GRAINGER APPROVED
    • SDR 11 Pipe features an outside diameter that is eleven times the thickness of the wall.

    • Item # 46KK62
    • Mfr. Model # 500055
    • Pipe, Pipe Schedule SDR 11, Non-Threaded Pipe Connection Type, Pipe Size - Nominal 1/2 In., Overall Pipe...More

  • Schedule 80 CPVC Pipe, Non-Threaded
    • TM

      Grainger Choice

    • Multiple product options available

      Schedule 80 CPVC Pipe are nontoxic, lightweight, and designed to resist corrosion, chemicals, and rust. Use with PVC primer and cement. Max. pressure: 246 psi. WARNING: Thermoplastic piping products should not be used for systems to transport or store compressed air or gases, nor should these products be tested with air or gases in above- or below-ground locations.

      Multiple product options available

  • Schedule 80 CPVC Pipe Nipple, Threaded on Both Ends
    • TM

      Grainger Choice

    • Multiple product options available

      Schedule 80 PVC and CPVC Pipe Nipples are nontoxic and lightweight. They are designed to resist corrosion, chemicals, and rust. Use with PVC primer and cement. Max. pressure: 420 psi at 73°F.

      CPVC Features added chlorine to allow for higher temperatures than PVC. Ideal for hot water and corrosive liquids. Max. temp.: 210°F.

      WARNING: Thermoplastic piping products should not be used for systems to transport or store compressed air or gases, nor should these products be tested with air or gases in above or below ground locations.

      Multiple product options available

  • Schedule 40 Pipe, Non-Threaded
    • Multiple product options available

      Spears® LabWaste® CPVC Corrosive Waste Schedule 40 Drainage System is a complete system of pipe, fittings joined by specially formulated one-step solvent cement. Certified for corrosive waste and use by NSF International (NSF®-cw) in accordance with ASTN F 2618. Spears® LabWaste® CPVC products can be used in a broad variety of academic, industrial, commercial, and food waste applications with proper evaluation of waste medium and service conditions. Fitting configurations are produced to applicable DWV patterns of ASTM D 3311. Max. pressure: rated for drainage only, Max. Temp: 220°F.

      Multiple product options available

View More
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More