Skip Content

Want to pay an invoice? Please call us at 1-800-GRAINGER (1-800-472-4643).

Filter Results By

Center and Auto Center Punches

5 results found that include 48 products

Results per page:  16 | 32 | 48
  • Center Punches Center Punches
  • Multiple product options available

    These center punches can be used to help mark the center of a point, such as the center of a hole when drilling holes. They can create a large enough dimple to guide the tip of a drill bit. You can also use them to make patterns in metal pieces.

    Multiple product options available

  • TM

    Grainger Choice

  • Automatic Center Punches Automatic Center Punches
  • Multiple product options available

    Use these automatic center punches to help mark the center of a point, with no striking required. They can punch starter holes, produce small indentations, or create a large enough dimple to guide the tip of a drill bit. They can also help make patterns in metal pieces.

    Multiple product options available

  • Center Punch Sets Center Punch Sets
  • Multiple product options available

    Designed with knurled bodies for a superior grip, these center punches are made of hardened tool steel. They can be used for punching starter holes, producing small indentations, creating large dimples, or making patterns.

    Multiple product options available

6" Steel Plunger Release Magnet with Red Anodized Fini
  • BROWN & SHARPE
  • 6" Steel Plunger Release Magnet with Red Anodized Finish Plunger Release Magnets
  • Remove metal chips and ferrous dust from slots and holes with these plunger release magnets. You can also use them to locate pins and screws in recesses.

  • Item # 38P072
  • Mfr. Model # 599-773
  • Plunger Release Magnet, Length 6 In., Diameter .250 In., Number of Pieces 1, Steel, Red Anodized, Adjustable...More

8" Hardened Steel Pin Punch with Black Oxide Finish
  • BROWN & SHARPE
  • 8" Hardened Steel Pin Punch with Black Oxide Finish Pin Punches
  • Designed with knurled finger grips, these hardened steel pin punches have a black oxide finish to prevent corrosion. Use them to remove metal pins from holes.

  • Item # 38P070
  • Mfr. Model # 599-768-4
  • Pin Punch, Length 8 In, Diameter .25 In, Material Hardened Steel, Finish Black Oxide, Point Flat, Features...More

Results per page:  16 | 32 | 48

Use a center punch from Grainger to help mark the center of a point, such as the center of a hole when drilling holes. The punch can create a large enough dimple to guide the tip of the drill bit. Center punches can also help make patterns in metal pieces. An automatic center punch operates without the need for a hammer. Choose from manual and automatic center punches in a wide range of sizes with carbide, modified parabolic and hardened striking ends. Shop Grainger today for the center punch that will help you get the job done!

Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More