Skip Content

Please Upgrade Your Browser Grainger will no longer support Internet Explorer 8 as of 07/2018. Please upgrade your browser or contact your System Administrator for support.

Center and Auto Center Punches

7 results found that include 62 products

Use a center punch from Grainger to help mark the center of a point, such as the center of a hole when drilling holes. The punch can create a large enough dimple to guide the tip of the drill bit. Center punches can also help make patterns in metal pieces. An automatic center punch operates without the need for a hammer. Choose from manual and automatic center punches in a wide range of sizes with carbide, modified parabolic and hardened striking ends. Shop Grainger today for the center punch that will help you get the job done!Close

Filter Results By

Viewing as

List Table
  • Center Punches
    • Multiple product options available

      These center punches can be used to help mark the center of a point, such as the center of a hole when drilling holes. They can create a large enough dimple to guide the tip of a drill bit. You can also use them to make patterns in metal pieces.

      Multiple product options available

  • Automatic Center Punches
    • Multiple product options available

      Use these automatic center punches to help mark the center of a point, with no striking required. They can punch starter holes, produce small indentations, or create a large enough dimple to guide the tip of a drill bit. They can also help make patterns in metal pieces.

      Multiple product options available

  • 4" Chrome Vanadium Steel Center Punch with Yellow Powd
    Center Punch Sets
    • STANLEY
    • Designed with knurled bodies for a superior grip, these center punches are made of hardened tool steel. They can be used for punching starter holes, producing small indentations, creating large dimples, or making patterns.

    • Item # 6AUD6
    • Mfr. Model # 16-227
    • Center Punch, Length 4 In., Diameter 1/2 In., Number of Pieces 1, Chrome Vanadium Steel, Yellow Powder...More

  • 8" Hardened Steel Pin Punch with Black Oxide Finish
    Pin Punches
    • BROWN & SHARPE
    • Designed with knurled finger grips, these hardened steel pin punches have a black oxide finish to prevent corrosion. Use them to remove metal pins from holes.

    • Item # 38P070
    • Mfr. Model # 599-768-4
    • Pin Punch, Length 8 In., Diameter 0.250 In., Number of Pieces 1, Hardened Steel, Black Oxide, Point Flat,...More

  • 6" Steel Plunger Release Magnet with Red Anodized Fini
    Plunger Release Magnets
    • BROWN & SHARPE
    • Remove metal chips and ferrous dust from slots and holes with these plunger release magnets. You can also use them to locate pins and screws in recesses.

    • Item # 38P072
    • Mfr. Model # 599-773
    • Plunger Release Magnet, Length 6 In., Diameter .250 In., Number of Pieces 1, Steel, Red Anodized, Adjustable...More

  • Drive Pin Punches
    • STARRETT
    • Multiple product options available

      Used to drive out damaged rivets, bolts, and pins that are bound up in holes, these drive pin punches have a knurled grip for secure holding. The steel punches are heat-treated and seasoned to help absorb repetitive shock and increase durability. Suitable for machine shops and motor service work.

      Multiple product options available

  • Machinist Punches
    • AMPCO
    • Multiple product options available

      For safety, these non-magnetic punches are made with aluminum bronze to help avoid sparks and protect against both fire and explosions. They are resistant to oxidation to help maintain integrity while interacting with materials. Suitable applications include: flammable or hazardous materials.

      Multiple product options available

View More
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More