Navigation Menu New

Access My Account, Order History, Lists and more here.

Adhesive-Backed Sanding Discs

Available619 products
Adhesive-backed sanding discs remove rust and paint, clean and level welds, and prepare them for final finishing. Sometimes called PSA (pressure-sensitive adhesive) discs, they have a sticky backing that attaches to a compatible smooth-surface backing pad. Adhesive-backed sanding discs cannot be reapplied after removing, so they're a good choice for applications where grits aren't changed frequently and the abrasive is fully used before changing.

General Purpose Sanding Discs for All Surfaces

General Purpose Sanding Discs for All Surfaces

General purpose sanding discs optimized for use on all surfaces have an open-coat aluminum oxide abrasive applied to a paper backing. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc

Non-Vacuum

Loading...

8 Hole

Loading...

PSA Disc Roll

Non-Vacuum

Loading...

5 Hole

Loading...

6 Hole

Loading...

General Purpose Sanding Discs for All Metals

General Purpose Sanding Discs for All Metals

General purpose sanding discs optimized for use on all metals have a closed-coat aluminum oxide abrasive applied to a paper backing. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome.

PSA Disc

Non-Vacuum

Loading...

Flexible General Purpose Sanding Discs for All Metals

Flexible General Purpose Sanding Discs for All Metals
Flexible general purpose sanding discs optimized for use on all metals have a closed-coat aluminum oxide abrasive applied to a cloth backing. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. The flexible, tear-resistant cloth backing conforms to contours and is more durable and tear resistant than paper.

PSA Disc

Non-Vacuum

Loading...

Flexible General Purpose Sanding Discs for Wood & Soft Metals

Flexible General Purpose Sanding Discs for Wood & Soft Metals
Flexible general purpose sanding discs optimized for wood and soft metals have an open-coat aluminum oxide abrasive applied to a cloth backing. Examples of soft metals include aluminum, copper, and brass. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The flexible, tear-resistant cloth backing conforms to contours and is more durable and tear resistant than paper.

PSA Disc

Non-Vacuum

Loading...

General Purpose Finishing Discs for All Surfaces

General Purpose Finishing Discs for All Surfaces
General purpose finishing discs optimized for use on all surfaces have an open-coat aluminum oxide abrasive applied to a film backing. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The high-strength polyester film backing is very flat for high-precision applications that require a consistent finish. Film can be used wet or dry. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc

Non-Vacuum

Loading...

PSA Disc Roll

Non-Vacuum

Loading...

High-Performance Sanding Discs for All Metals

High-Performance Sanding Discs for All Metals
High-performance sanding discs optimized for use on all metals have a closed-coat zirconia alumina abrasive applied to a paper backing. Zirconia alumina grains break down frequently to create fresh, sharp edges to cut and finish faster than aluminum oxide. It cuts cooler than aluminum oxide and is often used for high stock removal or under high pressure. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome.

PSA Disc Roll

Non-Vacuum

Loading...

High-Performance Sanding Discs for Wood & Soft Metals

High-Performance Sanding Discs for Wood & Soft Metals
High-performance sanding discs optimized for use on wood and soft metals have an open-coat zirconia alumina abrasive applied to a paper backing. Zirconia alumina grains break down frequently to create fresh, sharp edges to cut and finish faster than aluminum oxide. It cuts cooler than aluminum oxide and is often used for high stock removal or under high pressure. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Examples of soft metals include aluminum, copper, and low carbon steel.

PSA Disc

Non-Vacuum

Loading...

Flexible High-Performance Sanding Discs for Stainless Steel & Nickel Alloys

Flexible High-Performance Sanding Discs for Stainless Steel & Nickel Alloys

Flexible high-performance sanding discs optimized for use on stainless steel and nickel alloys have a closed-coat zirconia alumina abrasive applied to a cloth backing. Zirconia alumina grains break down frequently to create fresh, sharp edges to cut and finish faster than aluminum oxide. It cuts cooler than aluminum oxide and is often used for high stock removal or under high pressure. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. The flexible, tear-resistant cloth backing conforms to contours and is more durable and tear resistant than paper. Other workpiece materials include cobalt, Inconel, titanium, and chrome.

PSA Disc

Non-Vacuum

Loading...

Non-Loading Sanding Discs for All Surfaces

Non-Loading Sanding Discs for All Surfaces
Nonloading sanding optimized for use on all surfaces have an open-coat silicon carbide abrasive on a paper backing. Silicon carbide is a sharp synthetic abrasive that provides a fine finish in low-pressure applications such as finishing and painting preparation. It breaks down faster than aluminum oxide. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc Roll

Non-Vacuum

Loading...

Wet/Dry Sanding & Finishing Discs for All Surfaces

Wet/Dry Sanding & Finishing Discs for All Surfaces
Wet/dry sanding and finishing discs optimized for use on all surfaces have a closed-coat silicon carbide abrasive applied to a paper backing. Paper-backed wet/dry abrasives are flexible and can be used dry or with water or another lubricant to prevent loading and minimize dust. Silicon carbide is a sharp synthetic abrasive that provides a fine finish in low-pressure applications such as finishing and painting preparation. It breaks down faster than aluminum oxide. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc

Non-Vacuum

Loading...

Cool-Cutting Sanding Discs for All Surfaces

Cool-Cutting Sanding Discs for All Surfaces

Cool-cutting sanding discs optimized for use on all surfaces have an open-coat ceramic abrasive applied to a paper backing. Ceramic self-sharpens faster than other abrasives to remove material quicker. Quicker material removal speeds up the work and keeps the surface cooler, making ceramic a good choice for heat-sensitive metals. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc

Non-Vacuum

Loading...

PSA Disc Roll

Non-Vacuum

Loading...

5 Hole

Loading...

6 Hole

Loading...

Flexible Cool-Cutting Sanding Discs for All Surfaces

Flexible Cool-Cutting Sanding Discs for All Surfaces

Flexible cool-cutting sanding discs optimized for use on all surfaces have an open-coat ceramic abrasive applied to a cloth backing. Ceramic self-sharpens faster than other abrasives to remove material quicker. Quicker material removal speeds up the work and keeps the surface cooler, making ceramic a good choice for heat-sensitive metals. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The flexible, tear-resistant cloth backing conforms to contours and is more durable and tear resistant than paper. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc

Non-Vacuum

Loading...

Flexible Cool-Cutting Sanding Discs for Stainless Steel & Nickel Alloys

Flexible Cool-Cutting Sanding Discs for Stainless Steel & Nickel Alloys
Flexible cool-cutting sanding discs optimized for use on stainless steel and nickel alloys have a closed-coat ceramic abrasive applied to a cloth backing. Other workpiece materials include cobalt, Inconel, titanium, and chrome. Ceramic self-sharpens faster than other abrasives to remove material quicker. Quicker material removal speeds up the work and keeps the surface cooler, making ceramic a good choice for heat-sensitive metals. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. The flexible, tear-resistant cloth backing conforms to contours and is more durable and tear resistant than paper.

PSA Disc

Non-Vacuum

Loading...

Cool-Cutting Finishing Discs for All Surfaces

Cool-Cutting Finishing Discs for All Surfaces

Cool-cutting finishing discs optimized for use on all surfaces have an open-coat ceramic abrasive applied to a film backing. Ceramic self-sharpens faster than other abrasives to remove material quicker. Quicker material removal speeds up the work and keeps the surface cooler, making ceramic a good choice for heat-sensitive metals. Open-coat abrasives have grit on about 50% of the surface leaving space between the abrasive grains to prevent swarf from clogging the surface which keeps the workpiece cooler. The high-strength polyester film backing is very flat for high-precision applications that require a consistent finish. Film can be used wet or dry. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc

Non-Vacuum

Loading...

PSA Disc Roll

5 Hole

Loading...

6 Hole

Loading...

Non-Vacuum

Loading...

Cool-Cutting Paint-Preparation & Coating-Removal Discs for All Surfaces

Cool-Cutting Paint-Preparation & Coating-Removal Discs for All Surfaces

Cool-cutting paint-preparation and coating-removal discs optimized for use on all surfaces have a closed-coat ceramic abrasive applied to a paper backing. Ceramic self-sharpens faster than other abrasives to remove material quicker. Quicker material removal speeds up the work and keeps the surface cooler, making ceramic a good choice for heat-sensitive metals. Closed-coat abrasives have abrasive grain across the entire surface to provide a smoother finish and faster material removal than open-coat coverage. The paper backing provides a smooth, flat surface to provide consistent pressure across the work surface. Compatible surfaces and substrates include paint, plastic, composites, gelcoat, fiberglass, and carbon steel.

PSA Disc Roll

Non-Vacuum

Loading...

Flexible Diamond Sanding Discs for Hard-to-Grind Materials

Flexible Diamond Sanding Discs for Hard-to-Grind Materials
Flexible sanding discs have a diamond abrasive applied to a cloth backing for use on hard-to-grind materials. The flexible, tear-resistant cloth backing conforms to contours and is more durable and tear resistant than paper. Workpiece material examples include glass, fiberglass, chilled iron, ceramic, and reinforced plastic.

PSA Disc

Non-Vacuum

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.