Unmounted Flap Wheels

Filters

53 products

Unmounted flap wheels work with bench grinders and pedestal grinders to smooth, polish, and debur surfaces. Unmounted flap wheels require a mandrel before they can be installed. Flap wheels have a series of abrasive flaps that smooth using the side of the wheel rather than the face, making them a good choice for cleaning edges, inside pipes, and hard-to-reach areas. Overlapping flaps exposes fresh abrasive as the abrasive wears away.

General Purpose Flap Wheels for All Metals

General purpose unmounted flap wheels optimized for use on all metals have a coated aluminum oxide abrasive. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds.

5/8 in Unthreaded Hole


Loading...

1 in Unthreaded Hole


Loading...

Surface-Conditioning Flap Wheels for All Metals

Surface-conditioning unmounted flap wheels for all metals have a nonwoven aluminum oxide abrasive. Surface-conditioning abrasives made of nonwoven nylon conform to irregular surfaces and remove surface imperfections, mill scale, and surface rust to create a smooth surface ready for finishing. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome.

1/4 in Unthreaded Hole


Loading...

2 in Unthreaded Hole


Loading...

3 in Unthreaded Hole


Loading...

5 in Unthreaded Hole


Loading...

Blending & Finishing Flap Wheels for All Metals

Blending & finishing flap wheels for all metals are made of a nonwoven silicon carbide abrasive. Blending and finishing abrasives remove fine lines and scratches and smooth surfaces to prepare surfaces for final finishing. Silicon carbide is a sharp synthetic abrasive that provides a fine finish in low-pressure applications such as finishing and painting preparation. It breaks down faster than aluminum oxide. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome.

2 in Unthreaded Hole


Loading...

Surface-Conditioning Flap Drums for All Metals

Surface-conditioning flap drums for all metals install on power burnishers and are made of nonwoven aluminum oxide abrasive. Blending and finishing abrasives remove fine lines and scratches and smooth surfaces to prepare surfaces for final finishing. Aluminum oxide is a strong, sharp, and durable abrasive that penetrates the work surface and withstands heat and high speeds. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome.

5/8"-11 Threaded Hole


Loading...

Blending & Finishing Flap Drums for All Metals

Blending and finishing flap drums for all metals install on power burnishers and are made of nonwoven aluminum oxide abrasive. Blending and finishing abrasives remove fine lines and scratches and smooth surfaces to prepare surfaces for final finishing. Silicon carbide is a sharp synthetic abrasive that provides a fine finish in low-pressure applications such as finishing and painting preparation. It breaks down faster than aluminum oxide. Example metals include mild and carbon steel, cast iron, cobalt, titanium, and chrome.

5/8"-11 Threaded Hole


Loading...

Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.

Navigation Menu New

Sign In

All Products

Sign In

Unmounted Flap Wheels