Navigation Menu New

Access My Account, Order History, Lists and more here.

Lapping Compounds

Available23 products
Lapping compounds create flat surfaces in high-precision machining applications. Compound is applied between plates that rotate in opposing directions until the compound breaks down when surfaces are flat.
Brand

Oil-Soluble Clover Lapping Compounds

Oil-Soluble Clover Lapping Compounds
Oil-soluble Clover lapping compounds are made of silicon carbide abrasive in an oil base for lapping surfaces where parts are prone to rusting. Oil-based lapping compounds are used on parts that aren't sensitive to solvents required to clean surfaces after lapping. They also remain moist longer than water-based compounds and are less likely to cause parts to rust.

Coarse

Coarse removes material quickly for the initial smoothing pass. Coarse Clover grades are G, F, and E (80 to 120 grit).

Loading...

Medium

Medium provides controlled metal removal. Medium Clover grades are NC and D (150 to 180 grit).

Loading...

Medium Fine

Medium Fine is used for cylinder lapping. Medium-fine Clover grades include C and B (220 to 240 grit).

Loading...

Fine

Fine is used for finishing and valve lapping, as well as use on gauges, bearings, and dies. Fine Clover grades include A and 1A (280 to 320 grit).

Loading...

Very Fine

Very Fine is used for lapping and fine polishing. Very-fine Clover grades include 2A and 4A (400 to 600 grit).

Loading...

Extremely Fine

Extremely Fine is used for high-precision lapping and polishing. Extremely-fine Clover grades include 5A, 6A, and 7A (800 to 1,200 grit).

Loading...

Oil-Soluble Clover Lapping Compound Assortments

Oil-Soluble Clover Lapping Compound Assortments
Oil-soluble Clover lapping compound assortments include a selection of grits used for flattening and polishing surfaces. They're are made of silicon carbide abrasive in an oil base for lapping surfaces where parts are prone to rusting. Oil-based lapping compounds are used on parts that aren't sensitive to solvents required to clean surfaces after lapping. They also remain moist longer than water-based compounds and are less likely to cause parts to rust.
Loading...

Water-Soluble Clover Lapping Compounds

Water-Soluble Clover Lapping Compounds
Water-soluble Clover lapping compounds are made of silicon carbide and used in applications where parts are sensitive to oil or where water clean-up is required.

Coarse

Coarse removes material quickly for the initial smoothing pass. Coarse Clover grades are G, F, and E (80 to 120 grit).

Loading...

Medium

Medium provides controlled metal removal. Medium Clover grades are NC and D (150 to 180 grit).

Loading...

Medium Fine

Medium Fine is used for cylinder lapping. Medium-fine Clover grades include C and B (220 to 240 grit).

Loading...

Fine

Fine is used for finishing and valve lapping, as well as use on gauges, bearings, and dies. Fine Clover grades include A and 1A (280 to 320 grit).

Loading...

Very Fine

Very Fine is used for lapping and fine polishing. Very-fine Clover grades include 2A and 4A (400 to 600 grit).

Loading...

Extremely Fine

Extremely Fine is used for high-precision lapping and polishing. Extremely-fine Clover grades include 5A, 6A, and 7A (800 to 1,200 grit).

Loading...
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order.