Skip Content

Airless Paint Sprayer,1/2 HP,0.24 gpm close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.
How can we improve our Product Images?

Airless Paint Sprayer, 1/2 HP, 0.24 gpm

WAGNER

Price: $341.25 / each

Please sign in or register to access lists

  • Item # 13C767
  • Mfr. Model # Pro Coat
  • UNSPSC # 31211908
  • Catalog Page # 1921
  • Shipping Weight 22.95 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemAirless Paint Sprayer
  • HP1/2
  • Flow Rate0.24 gpm
  • Voltage115 VAC
  • Amps AC6.2
  • Operating Pressure2800 psi
  • Guns Supported1
  • Tip Size Included0.515"
  • Max. Tip Size0.515"
  • Hose Length25 ft.
  • Max. Hose Length35 ft.
  • Height12"
  • Length16-1/4"
  • Width13-1/2"
  • For Use With1 or 5 gal.
  • IncludesGun, Hose, Tip
How can we improve our Technical Specifications?

Compliance and Restrictions

  • This item is restricted for international sale.

Alternate Products


Rated 3.4 out of 5 by 29reviewers.
Rated 4 out of 5 by excellent until... Bought this unit to spray a ceiling with a pulled stucco finish. Set up was fine, follow the instructions and the unit was up and spraying in no time. Worked excellent for my purpose any issue where due to my own inexperience in spraying (over spray etc...)Then clean up time. I knew it was going to take long and was ready for it but what I wasn't ready for is the ferrule that held the suction filter on the pop out while cleaning. Had the hose adapter screwed in and the whole thing popped out of the clear suction hose. Fortunately it only broke after I was able to get the unit mostly clean and the water coming out was near clear. Would still recommend the unit as I am going to assume I just got unlucky and got a bad hose, and with a little tinkering I should be able to cut off the ferrule and get a hose clamp on it to hold it together. April 6, 2014
Rated 5 out of 5 by GREAT Sprayer! Give several minutes to prime and you're good to go! This sprayer is great! It took several minutes to prime the first time I used it but once that was done, it worked flawlessly. Give it a chance, you won't regret it! March 12, 2014
Rated 1 out of 5 by No suction out of the box... Purchased the unit about 6 months ago as I knew I would have some projects coming up. Just opened the unit and followed all instructions. It seems like it would be a good sprayer; however, the unit does not suck up anything. I cannot get it to even suck up a can of water...their is simply zero suction. Nothing is clogged as suggested...might just have to move to another brand that is more reliable. January 10, 2014
Rated 1 out of 5 by Do not buy this sprayer. Poorly made. I bought this sprayer to paint the inside of my 40 x 60 shed. This is now the second one of these sprayers I have owned. Set up was very easy. Primed the lines and had everything ready to spray in a matter of minutes. The sprayer worked very good for about 3 hrs. I noticed that the motor continually ran longer and longer to pressurize the system until it would no longer pressurize and would not spray. I took it back to the store and they gave me a replacement. The second sprayer broke after only 1-1/2 of spraying. Same problem. December 30, 2013
Rated 5 out of 5 by Excellent value Bought a procoat recently and just used for its first job, repainting the front of our local seniors club. The unit performed flawlessly and did a fantastic job, saved time and used less paint than brush and roller would have. It's compact, light, quiet, and handled undiluted premium latex perfectly. I do agree with those who say you must read the manual carefully SEVERAL times before using, and be meticulous when cleaning up. I have read some peoples complaints about this unit and it appears to me they first did not take the time to thoroughly learn how to set it up and use it properly, and second thought that the clean up was too long and difficult. All I can say is I took the time to fully understand the unit, saved at least two hours of rolling and brushing, got a perfect result, and did not mind taking a half hour to carefully clean it afterwards! This tool is a gem at its price point, and should be very carefully cleaned after use, AND OILED AS PER THE MANUAL. good tools are only good as long as you know how to use them properly, and you take care of them properly. Good job Wagner. October 9, 2013
Rated 4 out of 5 by Only used it twice, but works great so far! Just bought it this summer. Tried it for the first time on an old shed that needed painting. Followed the instructions and everything worked fine. Cleaned it up and put it away for a month.2nd attempt: Got it out, Primed it and then tried to get the paint flow out the gun. Nothing came out. Checked primeing again, that was working. Started cleaning the suggested parts before calling Tech support. Cleaned the input valve and then checked the gun filter. When I was putting the filter back in I noticed that I had installed it upside down in the gun. Glad I checked some parts before calling tech support!!!! Put it back together ands it worked great!!!! My suggestion would be go SLOW the first few times read and check the instructions. Next test will be the first time after the winter. September 25, 2013
Rated 3 out of 5 by This unit can be great or it can be terrible The intake valve is almost impossible to remove without breaking it. if there is a trick, it's not in the book. The plastic intake removal tool is poorly designed, I missed the part about what the notches in the end are for because they don't allow for clearing the spring stop on the intake valve. The unit should come with a viscosity gauge, a little too thick and there is no draw or intermittent draw. Throw away plastic covering for the unit would help in clean-up and the draw tube is too stiff. I can go on but won't.But..... if the planets are aligned and you click your heels just the right way and you've run out of expletives to describe your experience it works great! it really does for a while, maybe oh great there it goes again.....running great! May 27, 2013
Rated 5 out of 5 by pro coat All I can say about the pro coat is,.. I painted the exterior of my house (2 story) in 4 hours,... great job for an amature, then after Ithat project , I tackled the pool, draining and fixing all potential leaks, I rolled the primer which had activator in it, no fun!, took 4 hours on that! I looked at my house and kicked myself,.. well, I mixed the epoxy paint for the pool, and had it done in 45 minutes, which was good because the paint also had activator in it which set in 15-20 minutes, i simply mixed only 3 gallons at a time and sprayed like a madman! then clean up took about an hour and a half, I love my pro coat! saved me over 15,000 doing this myself, thank you wagner! April 12, 2013
2next>>

Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.