Using 360° Viewing:
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
Toe Guard, Unisex, Universal, PR 1
- Item # 5T455
- Mfr. Model # 5T455
- UNSPSC # 46181606
- Catalog Page # 2388
- Shipping Weight 1.25 lbs.
- ItemToe Guard
- Weight Each12 oz.
- Impact Rating75 lb.
- Dimensions4-1/2" W
Compliance and Restrictions
Alternate Search Terms
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.
Ask your questions. Share your answers.
An important point to remember is that neither the ANSI nor ASTM standards allows for the use of add-on type devices - strap-on foot, toe or metatarsal guards - as a substitute for protective footwear. According to the ANSI and ASTM standards, any protective toe caps or metatarsal guards must be designed, constructed and manufactured into the protective footwear during the manufacturing process and tested as an integral part of the footwear.
While ANSI and ASTM both exclude add-on devices, it doesn’t necessarily mean they’re not acceptable to OSHA. This paradox exists because OSHA states in 1910.136(b)(2) “Protective footwear that the employer demonstrates is at least as effective as protective footwear that is constructed in accordance with one of the above consensus standards will be deemed to be in compliance with the requirements of this section.” This means that if an employer can provide documentation, such as testing data proving their add-on devices provide protection equivalent to either the ANSI or ASTM performance standards, then the add-on devices are acceptable to OSHA. Most manufacturers of add-on devices have submitted their products to independent laboratories for testing. This data and its results can be obtained upon request.
This is meant to be supplemental to, but not to take place of, a steel toe. It does not meet OSHA or ASTM standards for steel toes.
Thank you for using Grainger Ask and Answer
Note: ANSI Z41 was withdrawn on March 1, 2005 and replaced with ASTM F2413-05 Standard Specification for Performance Requirements for Foot Protection.
This specification covers the minimum design, performance, testing, and classification requirements, and prescribes fit, function, and performance criteria for footwear designed to be worn to provide protection against a variety of workplace hazards that can potentially result in injury. It is not the intention of this specification to serve as a detailed manufacturing or purchasing specification, but can be referenced in purchase contracts to ensure that minimum performance requirements are met. Footwear conforming to this specification shall meet the performance requirements for the following: impact resistance for the toe area of footwear; compression resistance for the toe area of footwear; metatarsal protection that reduces the chance of injury to the metatarsal bones at the top of the foot; conductive properties which reduce hazards that may result from static electricity buildup, and reduce the possibility of ignition of explosives and volatile chemicals; electric shock resistance; static dissipative (SD) properties to reduce hazards due to excessively low footwear resistance that may exist where SD footwear is required; puncture resistance of footwear bottoms; chain saw cut resistance; and dielectric insulation.
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.