Using 360° Viewing:
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
- ItemWater Jetter Drain Cleaning Machine
- Drain Line I.D. Size Range2" to 10"
- Max. Run300 ft.
- Jet Pressure3000 psi
- Flow Rate5.5 gpm
- Power SourceGas Engine
- Throttle ControlManual
- Pump TypeTriplex
- Drum Capacity300 ft.
- ApplicationFor Blasting Through Sludge, Soap and Grease Blockages
- FeaturesPulse Action
- IncludesMfr. Model Nos. 1/4" NPT Nozzles: H-111 and H-112, H-38 Hose Reel with 200 ft. x 3/8" ID Jet Hose, 50 ft. x 3/8" ID Jet/Wash Hose, FV-1 Foot Valve, HW-30 Wash Wand, Nozzle Cleaning Tool
Compliance and Restrictions
Hazardous material - Engines
Alternate Search Terms
- Water Jetters (10)
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.
Ask your questions. Share your answers.
1. Make sure that you allow water to run through the hose before you put the nozzle on. This will “bleed out” any air that might be trapped in the loop.
2. Clean out each orifice in the nozzle at the end of the jet hose with the cleaning tool supplied with the jetter.
3. If the nozzle has been cleaned and the problem remains, try a different nozzle.
4. If the problem still remains, the unloader valve may need to be adjusted or the pump valves may need to be at least cleaned out or possibly re-built. You may want to locate an independent service center in your area to perform these checks.
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.