Magnetic Drill Press,500/250 RPM,1.25 In close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.

Please sign in or register to access lists

Magnetic Drill Press, 500/250 RPM, 1.25 In

MILWAUKEE

Price: $2,107.00 / each

Check Availability
Typically in Stock
2.7 Stars
2.7 of 5
  • Item # 4A940
  • Mfr. Model # 4208-1
  • UNSPSC # 23101502
  • Catalog Page # 1020
  • Shipping Weight 82.96 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemMagnetic Drill Press
  • Spindle Taper3 MT
  • Capacity Steel (In.)1-1/4
  • Tap Size Capacity (In.)1-14
  • Drill Point Pressure (Lb.)1600
  • Drill Travel (In.)11
  • Drill to Center From Base4-3/8
  • Motor HP2.0
  • Amps @ 120V11.5
  • No Load RPM500/250
  • Handle TypeReversible Feed
  • Cord3 Conductor, 9 ft.
  • CharacteristicsForward/Reverse Electronic Feedback Speed Control, Soft Start, Line Lock Out
  • Tool Length (In.)17-1/4
  • Tool Weight (Lb.)72
  • Height (In.)25-1/4
  • Motor Base No. Included6Z362
  • Motor Stock No. Included6Z285
  • Includes6-ft. Safety Chain

Compliance and Restrictions


Hazardous material - General

Alternate Products

Related Products

Alternate Search Terms


Rated 2.7 out of 5 by 3reviewers.
Rated 2 out of 5 by This a strong drill press but, the weight makes it hard to set up by yourself and when pressing to hard on the drill the magnet does comes loose. October 21, 2013
Rated 1 out of 5 This is such a big heavy press and the magnetic rating is way too low for this machine. The drill was always breaking loose on us during big jobs. We're exchanging it for another mag drill that has 3x the magnetic rating. September 12, 2013
Rated 5 out of 5 by Looking to buy another one. We have been using one of these in our machine shop for 19 years and looking to get another one for our other plant. I hope the quality is as good as our old one. Eazy to do maintenance on it and adjustment of the gibs is simple. This is in a shop were 20 to 30 different people have used and abused it for all this time. We drill, ream, tap with no problem and have used it at 90 deg.drilling and taping into presses. I do not have anything bad to say about this machine. If it was lighter it would be cheeper in quality and durabilty. Being able to use taper shank drills as well as a drill chuck is great. August 10, 2012
1-3 of 3
Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.

Product Q&A

(1 Question : 1 Answer)

Ask your questions. Share your answers.

 
 
« Back
 
 
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about dwallace is loaded.
Additional information about dwallace could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and has been advised by them of the following: The magnetic drill presses will not work on round poles. The presses need a minimum of ½” thick steel, and the surface must also be flat in order for the magnet to grip properly.
Thank you for using Grainger Ask and Answer
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about BryanB is loaded.
Additional information about BryanB could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1

Ask and Answer Disclaimer:
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.

The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any statements posted, including statements posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such statements.

Use of any linked web site provided in a post is at the user's own risk. This site should not replace the use by you of any technical product manual or other professional resource or adviser available to you.

The source for the answers given by Grainger in Ask and Answer are based on the information provided with the question, which may not be complete or may not apply to other situations, and based on product literature and informational materials, the content of which is provided by Grainger's product suppliers. Grainger disclaims liability for any information it provides in Ask and Answer which later may be alleged or determined by a court of law to be inaccurate or incorrect.

The answers given by Grainger in Ask and Answer are not intended to replace or supplement any professional, engineering or other consultation services available to its product users. Always read, understand, and follow the product information and instructions provided by the manufacturer. same on category AAA as well