Using 360° Viewing:
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
Light Panel, 0.095x23 3/4x47 3/4In, PK5
- Item # 4VZJ2
- Mfr. Model # 4VZJ2
- UNSPSC # 39111501
- Catalog Page # 700
- Shipping Weight 11.1 lbs.
- ItemLight Panel
- Material of ConstructionAcrylic
- Description/Special FeaturesClear
- Application MethodLay Into T-Bar Grid Under Fixture Or Cut To Size As Replacements
- For Use With4 By 2 Ft Fluorescent Fixtures
- Length (In.)47-3/4
- Width (In.)23-3/4
- Panel Thickness (In.)0.095
- Package Quantity5
Compliance and Restrictions
Alternate Search Terms
Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.
Ask your questions. Share your answers.
If you need additional information please contact us at 1-800-Grainger. Thank you for using Grainger.com Ask & Answer.
Thank you for using Grainger Ask & Answer.
CUTTING: Acrylic sheet can be cut with a variety of equipment. The selection of blades is critical with regards to the quality of the edge finish. Table, and Panel saws are the best options for high volume straight cuts. Material can be stacked to cut several sheets at one time. When cutting, the saw blade should protrude through the sheet approximately 1/4”. Saw blades, specifically designed for cutting acrylic sheet, are commercially
CIRCULAR SAW BLADE SPECIFICATIONS :
Rake angle 0 -10°
Clearance angle 10-15°
Blade teeth 80 per 10” blade
Blade Diameter/ RPM:
Tooth design - Band, scroll, and sabre saws are best for cutting intricate shapes and curves. Again, blade selection and proper feed rate is important to minimize melting or chipping. These saws are excellent for creating templates for vacuum or hand routing, and trimming off excess scrap material.
For more detailed assistance, please contact us at 800-323-0620.
Thank you for using Grainger Ask & Answer
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.