Using 360° Viewing:
- Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
- Zoom In: Double click on image.
- Zoom Out/Reset: Put photo at full zoom & then double click.
Gravity Flush Toilet Tank, 1.6 GPF
- Item # 2EMZ7
- Mfr. Model # 28-590
- UNSPSC # 30181505
- Catalog Page # N/A
- Shipping Weight 42.15 lbs.
- ItemToilet Tank
- Flushing MethodGravity Fed
- Gallons per Flush1.6
- With Liner/Without LinerWithout Liner
- MaterialVitreous China
- Flush HandleLeft Hand Trip Lever
- Manufacturers Warranty LengthLimited 5 yr.
Compliance and Restrictions
Alternate Search Terms
- Toilet Tanks (85)
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.
Ask your questions. Share your answers.
Most toilets tanks operate by gravity, flush the handle and a large flapper opens causing the water in the tank to fall thru the trapway of the bowel. This rapid "flush of water causes it to carry the waste and clean water thru the trap and down the toilet, the only time you woulld require a pump would be if you had very low water pressure.
I hope this answers your question, thanks for using Grainger Ask & Answer!
This is a great question, and the answer is maybe yes maybe no. The toilets trap way is designed to accomidate waste and water at a given speed, if your old tank for instance has a flush rate of say 3.6 to 4.0 GPF this tank will not work. The connection to the old toilet might not match up also. You would be better off to replace the Toilet Bowl at the same time, most toiiets by law now are required to be efficent so finding an older style tanks that flushes that amount of water will be difficult. But you can take a small bucket of water 1.6 gallons, pour it quickly down the toilet with some Toilet Papaer in and see if it flushes it completely. If it does then this tank will work. I hope this answers your question. Thanks for choosing Grainger Ask & Answer!
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.