Portable Inverter Generator,1600W Rated close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.

Please sign in or register to access lists

Portable Inverter Generator, 1600W Rated

GENERAC

Price: $664.50 / each

Check Availability
Clearance - Limited Quantity Available
4.2 Stars
4.2 of 5
  • Item # 4KCD6
  • Mfr. Model # 5792
  • UNSPSC # 26111604
  • Catalog Page # 1363
  • Shipping Weight 53.3 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemPortable Inverter Generator
  • Rated Watts1600
  • Surge Watts1650
  • Engine BrandGenerac OHV
  • Voltage120
  • Amps @ 120/240V13.3/NA
  • Circuit BreakerYes
  • Engine Size99cc
  • Run Time @ Full Load2.5 hr.
  • Run Time @ 1/2 Load4.9 hr.
  • Sound Level dB55 to 65
  • Fuel Tank Capacity0.8 gal.
  • Starter TypeRecoil
  • Wheel Kit IncludedNo
  • Air Cleaner TypeStandard
  • Low Oil Shut DownYes
  • Length21"
  • Width11"
  • Height18"
  • Full Power SwitchYes
  • Fuel TypeGas
  • Outlets15A Duplex, 12VDC 5A
  • Run Time Hour MeterNo
  • Cylinder MaterialCast Iron
  • IncludesOil, Battery Charging Cord, and Tool Kit
  • Warranty2 yr. Residential, 1 yr. Commercial
  • StandardsEPA/49-State/cETL

Compliance and Restrictions


Hazardous material - Engines

This item has been restricted from sale in the following states: CA.

Alternate Products


Rated 4.2 out of 5 by 6reviewers.
Rated 5 out of 5 by absolutely met all my expectations from the box and set up with oil and gas to starting and full operation was a 'cake walk'. May 28, 2013
Rated 5 out of 5 by Saved my tail No other generators available found this one at an ace hardware it ran the fridge, dog fence, light, fans and tv during the recent power outage in West Virginia. Yes it's small but it did the job. It ran for 6 hours at a time with out difficulty. Quality product! July 10, 2012
Rated 4 out of 5 by Bill Again I am posting again as I posted before "Not recommending this product" Thjis is an update: I took my generator to Generac in North Bend, Wa. They stated a bad circuit boad and needed replaced after 25 hours and 14 months. They stated a 1 hour labor rate of 85.00 and 10-14 days. I picked it up yesterday and they charged me nothing in labor, even though was past 12 months. Not sure if shop or Generac themselves, but I am assuming an isolated case and will now update to recommend. Thank You generac, you did the right thing. It makes a BIG difference and again I will suggest your product. July 4, 2012
Rated 3 out of 5 by 25 hours and broke Taking it in to repair after 25 hours and 14 months. Motor is solid, starts first pull. Run's 100% with no load, overload light on with nothing plugged in. Generac gave me repair shop 40 miles away, I found one 8 miles away with google. They stated likely bad regulator. Next time I'll buy a Honda and skip this mess of KAOS and driving, calling all over heck for a relatively New generator. Warrany on labor expired. I may throw in trash and buy a honda or whatever if over 200.00 labor to fix. Sad. June 1, 2012
Rated 3 out of 5 by This product gave me a headache from the start I bought this generator 2 days before the so called hurricane hit NY last summer. I lost my power so went to start my brand new generator. After 1 hour of trying to pull start it would not start. I figured there had to be something electrically wrong with the unit. I opened up the housing and found a broken wire. I had bearly enough room to strip the wire and install a butt splice. Once I did that the generator started right up. I called Generac a few days later and told them the problem I experienced. They said "well it's fixed now, so what do you want us to do about it?" March 23, 2012
Rated 5 out of 5 by very good camping product I used my 1600 watt Generac on a seven day camping and hunting trip this winter and it did very well providing power for lighting,microwave,and other items. November 24, 2011
1-6 of 6
Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.

Ask and Answer Disclaimer:
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.

The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any statements posted, including statements posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such statements.

Use of any linked web site provided in a post is at the user's own risk. This site should not replace the use by you of any technical product manual or other professional resource or adviser available to you.

The source for the answers given by Grainger in Ask and Answer are based on the information provided with the question, which may not be complete or may not apply to other situations, and based on product literature and informational materials, the content of which is provided by Grainger's product suppliers. Grainger disclaims liability for any information it provides in Ask and Answer which later may be alleged or determined by a court of law to be inaccurate or incorrect.

The answers given by Grainger in Ask and Answer are not intended to replace or supplement any professional, engineering or other consultation services available to its product users. Always read, understand, and follow the product information and instructions provided by the manufacturer. same on category AAA as well