Skip Content

IR Therm,1 In @ 10 In Focus close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.
How can we improve our Product Images?

IR Therm, 1 In @ 10 In Focus

FLUKE

Price: $136.65 / each

Please sign in or register to access lists

  • Item # 16X949
  • Mfr. Model # FLUKE-62 MAX/WWG
  • UNSPSC # 41112210
  • Catalog Page # 931
  • Shipping Weight 0.9 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemInfrared Thermometer
  • Temp. Range (F)-22 Degrees to 932 Degrees F
  • Temp. Range (C)-30 Degrees to 500 Degrees C
  • Focus Spot Size and Distance1" @ 10"
  • Accuracy1.5 Degrees C
  • EmissivityAdjustable 0.10 to 1.00
  • IncludesManual
  • Laser SightingSingle Dot
  • Battery TypeAA
  • Data HoldYes
  • Resolution0.1 Degrees C
  • Spectral Response8 to 14 uM
  • Response TimeLess Than 500 msec.
  • Repeatability+/-1 Degrees C
  • MemoryMin/Max
  • Operating Temp. Range0 Degrees to 50 Degrees C
  • StandardsEN/IEC 61010-1: 2001, Laser Safety FDA and EN 60825-1 Class II
  • TriggerYes
  • Special FeaturesIP54 Rating and (3) Meter Drop
  • Manufacturers Warranty Length3 yr.
How can we improve our Technical Specifications?

Compliance and Restrictions

  • This item is restricted for international sale.

Alternate Products


Rated 3.7 out of 5 by 11reviewers.
Rated 3 out of 5 Nice product for quick refrence This is a great product for quick refrence. I use it to do delta t at registers, check motor surface temps, and on condenser coils to get an idea of the temp. Not intended for precise measurement. I like that ems is adjustable to accommodate the materials you working with to improve the accuracy. I have a complaint similar to that of one of the previous reviewers, no memory. I would like to see a last reading recall and the ability to use the previous reading in memory as a refrence for delta t. Also, I like the alarm feature. If you know how hot normal operating motors run in your application run you can set it as your alarm limit. But it would have been nice with a tone alert. Sometimes spikes can go fast it would be nice to have a tone to make you realize it's bypassed your limit. Otherwise a nice reasonably priced product. Thanks for it fluke! I got this on the promotion for purchasing my 87V. July 24, 2013
Rated 3 out of 5 Nice product for quick refrence This is a great product for quick refrence. I use it to do delta t at registers, check motor surface temps, and on condenser coils to get an idea of the temp. Not intended for precise measurement. I like that ems is adjustable to accommodate the materials you working with to improve the accuracy. I have a complaint similar to that of one of the previous reviewers, no memory. I would like to see a last reading recall and the ability to use the previous reading in memory as a refrence for delta t. Also, I like the alarm feature. If you know how hot normal operating motors run in your application run you can set it as your alarm limit. But it would have been nice with a tone alert. Sometimes spikes can go fast it would be nice to have a tone to make you realize it's bypassed your limit. Otherwise a nice reasonably priced product. Thanks for it fluke! I got this on the promotion for purchasing my 87V. July 24, 2013
Rated 5 out of 5 by Now using FLUKE 62 MAX.... Best Product. After using RAYTEK MT6, Now using FLUKE 62 MAX.... Best Product.Nice Quality , FLUKE means QUALITY July 9, 2013
Rated 5 out of 5 by Now using FLUKE 62 MAX.... Best Product. After using RAYTEK MT6, Now using FLUKE 62 MAX.... Best Product.Nice Quality , FLUKE means QUALITY July 9, 2013
Rated 2 out of 5 by recommend yes but be aware.. I know Fluke for over 35 years and this product is the first that I cannot blindly recommend due to a lacking quality control. First unit, showed a constant increase of 20 degree C, the unit was given back and replaced by a second unit, laser ray beams slightly to the left....I strongly recommend that in case you buy this thermometer, give it a thorough check. January 22, 2013
Rated 2 out of 5 by recommend yes but be aware.. I know Fluke for over 35 years and this product is the first that I cannot blindly recommend due to a lacking quality control. First unit, showed a constant increase of 20 degree C, the unit was given back and replaced by a second unit, laser ray beams slightly to the left....I strongly recommend that in case you buy this thermometer, give it a thorough check. January 22, 2013
Rated 3 out of 5 by Almost Perfect This little guy is almost perfect if you are looking for something outside an IR Thermography Camera. Here to me is a big design problem: 5 seconds after turn off the trigger, the display goes blank and your data is gone forever. This means you don't even have time to evaluated what you just measured, you can only use this tool actively while looking at it and then you’re done. Seems to me they could have designed it so that if you hit the up arrow the hold screen comes back on. November 30, 2012
Rated 3 out of 5 by Almost Perfect This little guy is almost perfect if you are looking for something outside an IR Thermography Camera. Here to me is a big design problem: 5 seconds after turn off the trigger, the display goes blank and your data is gone forever. This means you don't even have time to evaluated what you just measured, you can only use this tool actively while looking at it and then you’re done. Seems to me they could have designed it so that if you hit the up arrow the hold screen comes back on. November 30, 2012
2next>>

Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.

Product Q&A

(3 Questions : 3 Answers)

Ask your questions. Share your answers.

 
 
« Back
 
 
1 year, 1 month ago
by
Read all my Q&A
 
Please wait while more information about AJ01 is loaded.
Additional information about AJ01 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and has been advised by them of the following: The NIST calibration certification is not included with this IR thermometer. Grainger can obtain a certified version from Fluke, however the cost will be higher and the lead time longer. Please call 1-800-323-0620 for assistance.
Thank you for using Grainger Ask and Answer
1 year, 1 month ago
by
Read all my Q&A
 
Please wait while more information about BryanB is loaded.
Additional information about BryanB could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 months, 3 weeks ago
by
Read all my Q&A
 
Please wait while more information about MLohn is loaded.
Additional information about MLohn could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
This thermometer will only measure surface temperature.

Thank you for Using Grainger Ask & Answer.
2 months, 1 week ago
by
Read all my Q&A
 
Please wait while more information about Stix is loaded.
Additional information about Stix could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Hello. Using an infrared unit exclusively for checking ice temp on an outdoor ice rink. The unit currently being used (Ryobi) is only accurate until the unit itself gets cold, about one minute. Any recommendations? Thanks
2 months ago
by
Read all my Q&A
 
Please wait while more information about ZamMan is loaded.
Additional information about ZamMan could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Operating temperature 0°C to 50°C (32°F to 122°F)

Thank you for using Grainger Ask & Answer.
1 month, 1 week ago
by
Read all my Q&A
 
Please wait while more information about Stix is loaded.
Additional information about Stix could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1