View Product Family
Industrial Digital Multimeter,10A,1000V close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.

Please sign in or register to access lists

Industrial Digital Multimeter, 10A, 1000V

FLUKE

Price: $809.00 / each

Product ships within 6 business days from supplier
4.3 Stars
4.3 of 5
  • Item # 1EVC4
  • Mfr. Model # Fluke-289-NIST
  • UNSPSC # 41113630
  • Catalog Page # N/A
  • Shipping Weight 3.24 lbs.
Country of Origin USACountry of Origin is subject to change.

Technical Specs

  • ItemDigital Multimeter
  • Multimeter StyleFull Size
  • Max. AC Volts1000
  • Max. DC Volts1000
  • Max. AC Amps10
  • Max. DC Amps10
  • Max. Ohms500 megaohm
  • Basic DC Accuracy+/-0.025%
  • Counts50000
  • Battery TypeAA Alkaline
  • Safety RatingCAT III 1000V, CAT IV 600V
  • Audible ContinuityYes
  • AC ResponseTrue RMS
  • Capacitance Range1nF to 100mF
  • Frequency Counter Range99.99 Hz to 999.99 kHz
  • Min./Max. MemoryYes
  • Peak HoldYes
  • Data LoggingYes
  • InterfaceUSB
  • Data HoldYes
  • Bar GraphYes
  • DisplayBacklit Digital - 1/4 VGA Dot Matrix
  • Auto RangingYes
  • Temp. Range-328 to 1994 Degrees F (-200 to 1090 Degrees C)
  • Special FeaturesLow Impedance Voltage, Low Ohms and Low Pass Filter for Accurate Voltage and Frequency Measurements on Adjustable Speed Motor Drives and Electrically Noisy Equipment
  • Duty Cycle0.01 to 99.99%
  • Diode TestYes
  • Auto Power OffYes
  • Calibration CertificateNIST
  • StandardsUL, CSA, CE
  • IncludesBatteries, Test Leads, Alligator Clips, Instructions
  • Manufacturers Warranty LengthLimited Lifetime

Compliance and Restrictions

None

Alternate Products

Related Products


Rated 4.3 out of 5 by 9reviewers.
Rated 2 out of 5 by Leaking caps? There seems to be a leaking supercapacitor issue with this meter. Otherwise it's a great meter!http://www.eevblog.com/forum/testgear/fluke-189-with-leaking-surface-mount-coin-cell/ December 6, 2013
Rated 5 out of 5 by The All In One Meter This meter is amazing for the price range. I use this everyday from trending feeders to see capacity for new additions to troubleshooting motor and motor control circuits. This meter with a clamp attachment will almost most any meters(besides speciality meters.) The dual lighted display is so clear in any to no light. The trend graphing is a huge addition for a meter in this price range. The only downside is the boot time but it is not terrible somewhere around 5 secs. I bought this meter to replace my 119 and it has been worth every penny. September 4, 2013
Rated 5 out of 5 by There can be no other than Fluke in my company I am a long time Fluke customer, and have had a long line of Fluke products that I still use every day. I am in the generator sales/service industry. I will not allow any of my employees to have less than a Fluke 187. My 189 is a back-up, but I never have to use it unless I need two at a time. Nothing silences a noisy customer better than a nice looking print-out of what his generator will, and won't, do. I enjoy it when discussing problems with a factory and they question my numbers, and I tell them that they are from a Fluke 289, they move on to another subject.Fluke. There can be no other. October 8, 2012
Rated 5 out of 5 by Most Useful Tool in My Bag I'm an A/V system integrator and live audio veteran and am absolutely in love with this meter. Being able to have voltage measurements displayed in dBm and dBV is an absolutely indespensible tool in the field or at a show. The dBm range correlates perfectly to dBu when set to mimic a 600-ohm impedance. If I have a problem with a system input or output, in little more than the time it takes to connect the leads, I have all the info I need to point me in the right direction. With the AC mV function displaying dBm, I can actually directly measure microphone outputs (and make quick use of the readings), which is something I've pined for in a meter for quite a while. It's saved me countless head-scratching sessions.The Crest Factor function is also great for quickly checking whether an audio test signal is being distorted somewhere up-stream.I've also had it on the bench verifying performance on countless products. Trend Capture is awesome for predicting how much a setting will drift after an A/V system has been commissioned. It's nice knowing these things before a service call is ever made.I also use the 50-Ohm range in the field to check speaker systems for proper impedance loading. It's nice having that extra bit of accuracy when you're dealing with systems that have numerous loudspeakers.Adjustable display contrast on-the-fly makes for easy readings in any environment.All in all, it's an absolutely wonderful tool for what I do.I would LOVE to see a real-time graph implemented sometime in the future if it's possible. I don't like having to stop a recording and restart it to check progress.My only real complaint is that I don't have two of them! Not to say my 87V doesn't get its fair share of attention. ;) September 12, 2012
Rated 5 out of 5 by excellent meter In 2004 or so Fluke came out with the 189 and I bought one. I liked the accuracy and came back in 2007/2008 and bought FOUR 289's. I use them constantly. They have paid for themselves in the recording capability which helps troubleshooting to a very high degree. Being able to capture faults in an operating system is kind of like having a storage scope but for far less cost. The accuracy is top notch and the Fluke durability is key if you need to use your meters on a daily basis for your occupation. I suggest putting lithium batteries in them, these meters are power hungry little devils, they eat up alkaline batteries like no tomorrow and the best way to combat that is to use lithium batteries. In all other regards, I recommend this meter without reservation. July 10, 2012
Rated 5 out of 5 by This meter has the versatility for any job. As a technician at a R&D facility I work on a variety of different projects. I not only build prototypes, but visit operational sites to troubleshoot and repair in service units. With the 289 I am able to record transients; to test not only for continuity, but to reverse continuity check; to measure frequency; to measure microamps; to test components, including the value of capacitors. Since I travel all over the world, having to carry only one meter is a real plus for me. June 19, 2012
Rated 2 out of 5 by Good but....... I bought this meter when it first came out, actually ordered it before it was released from my distributor. It has served well the past couple years but recently I have had to send it in for repair twice for the same problem. That doesn't sit well with me. I haven't had any problems with my other fluke products but I don't feel I can trust my 289 when it keeps getting sent back for repair. June 16, 2012
Rated 5 out of 5 by Fits my needs, and then some As the diagnostician in a diesel and automotive repair shop, I was in need of a meter that would allow me to perform just about any test my job would require. My choice of the 289 was obvious, as the trend-plot feature is a life saver when diagnosing intermittent issues. The large VGA screen helps readability when working over an operating engine. When working on the interior or undercarriage, the backlight is a necessity. I have also found the 50 ohm function very useful for testing the serial data wiring in modern systems as they are very sensitive to corrosion and other resistance inducing conditions. The only major issue I have with the 289's features is the lack of real time graphing and a min, max, and average display for the recording. All told, I believe I have made the right choice in purchasing this product and expect many years of use from it. June 15, 2012
2next>>
Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.

Ask and Answer Disclaimer:
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.

The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any statements posted, including statements posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such statements.

Use of any linked web site provided in a post is at the user's own risk. This site should not replace the use by you of any technical product manual or other professional resource or adviser available to you.

The source for the answers given by Grainger in Ask and Answer are based on the information provided with the question, which may not be complete or may not apply to other situations, and based on product literature and informational materials, the content of which is provided by Grainger's product suppliers. Grainger disclaims liability for any information it provides in Ask and Answer which later may be alleged or determined by a court of law to be inaccurate or incorrect.

The answers given by Grainger in Ask and Answer are not intended to replace or supplement any professional, engineering or other consultation services available to its product users. Always read, understand, and follow the product information and instructions provided by the manufacturer. same on category AAA as well