Skip Content

EZ Lock Sanding Mandrel close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.
How can we improve our Product Images?

EZ Lock Sanding Mandrel

DREMEL

Price: $8.38 / each

Please sign in or register to access lists

  • Item # 34E365
  • Mfr. Model # ez407sa-01
  • UNSPSC # 20111611
  • Catalog Page # N/A
  • Shipping Weight 0.1 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemEZ Lock Sanding Mandrel
  • Applicationsanding
  • For Use With8100, 8220
  • Number of Pieces1
How can we improve our Technical Specifications?

Compliance and Restrictions

None

Alternate Search Terms


Rated 1.9 out of 5 by 10reviewers.
Rated 1 out of 5 by Poor design The urethane snap drum does not lock onto the sanding sleeve like the original compression rubber drum. I tried it and as soon as I started the sanding sleeve slipped up the urethane drum while the drum was still snapped into place. December 1, 2014
Rated 5 out of 5 by Perfect for my needs! I have a Rottie mix with thick black nails. I bought a ConAir pet nail grinder but after 7 months the bit need to be replaced. Unfutunatly replacements are no longer available. I found the EZ Lock Sanding Mandrel at Home Depot. The shaft was about 1/4” shorter than the ConAir one but thought I'd give it a try. Turned out the shaft was a tiny bit wider but I was able to put more than 1/2 of it in the connector. The band I used was the 120 grit. I just followed the instructions to remove the 60 grit band it came with and put the 120 band on. It worked beautifully! I did all 20 nails without much of a struggle. I used frozen mixed veggies as treats ;-). November 20, 2014
Rated 1 out of 5 by bands slip same issue everyone else has. bands slip off and I've pushed so hard the blue rubber comes right off October 19, 2014
Rated 2 out of 5 by Drum too small? First use sliding and slipping even though I tightened the screw as far as it goes. Would rather it be hard to change out than fit too loosely and not work. August 16, 2014
Rated 5 out of 5 by HUGE Timesaver I bought two of these to try out. I use these very often to sand aluminum, wood and plastic. They have worked GREAT. I have NEVER had the sanding band move on the mandrel. It does take a fair amount of force to lock / release them, so the mandrel must be in the Dremel. I usually push the EZ407 mandrel against my work bench to lock it. After six months of use and about fourty sanding bands on each of my two mandrels, one of them is comming apart at the end. This is about how long the rubber mandrels last for me. So they have passed my test. I bought six more and I'm throwing away my old rubber mandrels. Now I hope they come out with an EZ mandrel for the 1/4 inch sanding drums. July 16, 2014
Rated 1 out of 5 by Incredible.. replace good design with poor design. One would expect to see some kind of easy slide release to contract the mandrel's drum, and that slide would then return to expand the mandrel's drum to secure the sanding drum... instead, this thing has a fake slider that does nothing but expose a locked star washer.The sanding drum is very difficult to push into working position on this mandrel..Get the old tried and true, screw activated, expanding rubber mandrel, and relegate this thing to Alfred E Neuman. June 24, 2014
Rated 1 out of 5 by Drum slips off EZ407SA Have been using Dremel for many, many years. I recently bought the EZ407 mantel and everytime I begin to sand the drum begins to slip off the mantel. Checking online I notice others are having the same problem. I'm hoping Dremel has developed a solution for this problem June 14, 2014
Rated 1 out of 5 by Too EZ I seem to be having the same problem as everyone else. The ease of use is great but the discs just dont want to stay on the drum. I've tried different speeds, pressure, and angles, but just cant win. It definitly needs more outward pressure from the drum, because as-is, there is very little that can be done with it. Great idea though. If it worked as it should, it would surely be a 5 star review June 8, 2014
2next>>

Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.