Skip Content

Solenoid,Laminated close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.

Solenoid, Laminated

DORMEYER

Price: $34.25 / each

Please sign in or register to access lists

Check Availability
Typically in Stock
  • Item # 4X240
  • Mfr. Model # 2005-M-1
  • UNSPSC # 31251510
  • Catalog Page # 395
  • Shipping Weight 1.15 lbs.
Country of Origin USACountry of Origin is subject to change.

Technical Specs

  • ItemSolenoid
  • TypeLaminated
  • Stroke Range1/8 to 1"
  • Pull Force Range64 to 128 oz.
  • Width (In.)1-13/16
  • Depth (In.)2-1/16
  • Length (In.)2-1/2
  • Coil Volts120VAC
  • Seated Amps0.43
  • Seated Watts17.9
  • Coil Resistance (Ohms)20.5
  • TerminalsSolder Lug Coil
  • Amps @ Max. Stroke4.90
  • Mounting Holes2 x 1-3/8"
  • Gravity Value (Oz.)4.32

Compliance and Restrictions

None

Details

Laminated
• Pull-type Continuous duty cycle rated at 25°C
Constructed of durable laminated steel with corrosion-resistant frame and plunger. Solenoids have polyester or nylon bobbins, encapsulated or taped coils, steel plunger springs, and brass plunger guides. Class A coil insulation with solder lug coil terminals.
Solenoids
RoHS Compliant.
Product content provided by supplier

Alternate Products


Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.

Product Q&A

(1 Question : 1 Answer)

Ask your questions. Share your answers.

 
 
« Back
 
 
starting up this fall I have had to replace it every week. Very costly and manufacture is no help. An aqustat operates it. When it calls for heat I have 122 volts at solenoid. Each one that I have replaced has shown an open coil with an ohm meter. What should I be looking at as a cause or a different solenoid?
1 year, 9 months ago
by
Read all my Q&A
 
Please wait while more information about Bill1 is loaded.
Additional information about Bill1 could not be loaded.
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and have been advised by them of the following: Dormeyer has indicated that the 2005-M-1's may fail when used with wood burning outdoor furnances because this solenoid has a Low Temperature coil (Class "A" coil rated 105C/221F maximum temperature). Use of the Grainger item 4X240 in a high temperature application is not in accordance with it's specifcations.

According to Dormeyer/Ledex, the solution for your outdoor wood boiler application would be for you to use a Dormeyer model #2005-F-34 that has a High Temperature coil (Class "F" 155C/311F maximum temperature).

Because Grainger does not currently carry (as a stocked item) Dormeyer model #2005-F-34, please contact your local Grainger Branch or call us at 800-323-0620 to explore Special Order options.

Thank you for using Grainger Ask & Answer
1 year, 8 months ago
by
Read all my Q&A
 
Please wait while more information about TPSMRLGD is loaded.
Additional information about TPSMRLGD could not be loaded.
+2points
2out of 2found this answer helpful.
Was this helpful?helpful2unhelpful0
1 of 1
1 of 1