View Product Family
Blower,146 cfm,115V,0.75A,3100 rpm close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.

Please sign in or register to access lists

Blower, 146 cfm, 115V, 0.75A, 3100 rpm

DAYTON

Price: $91.10 / each

Check Availability
Typically in Stock
1.0 Stars
1.0 of 5
  • Item # 1TDP7
  • Mfr. Model # 1TDP7
  • NSN # 4140-01-237-7969
  • UNSPSC # 40101601
  • Catalog Page # 4154
  • Shipping Weight 4.75 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemOEM Blower
  • Outlet ShapeRectangular
  • With/Without FlangeWith Flange
  • Wheel Dia.3-15/16"
  • Wheel Width1-7/8"
  • CFM @ 0.000-In. SP146
  • CFM @ 0.100-In. SP140
  • CFM @ 0.200-In. SP126
  • CFM @ 0.300-In. SP124
  • CFM @ 0.400-In. SP120
  • CFM @ 0.500-In. SP110
  • Voltage115
  • Hz50/60
  • Phase1
  • Full Load Amps0.75
  • RPM3100
  • Bearing TypeBall
  • Motor TypePermanent Split Capacitor
  • Motor EnclosureOpen
  • Motor InsulationClass B
  • Thermal ProtectionAuto
  • Lead Length13"
  • Conduit BoxYes
  • Max. Ambient Temp.104 Degrees F
  • Max. Inlet Temp.104 Degrees F
  • Inlet Dia.3-1/8"
  • Outlet Height2-3/16"
  • Outlet Width3-1/4"
  • Overall Height5-3/4"
  • Overall Width6-5/16"
  • Overall Depth5-3/8"
  • Wheel TypeForward Curve
  • Drive TypeDirect
  • Mounting PositionAll Position
  • Housing FinishEnamel
  • Housing MaterialRolled Steel
  • Housing ColorGray
  • Agency ComplianceUL Recognized US and Canada (E47479), CE
  • Replaces4C446
  • IncludesDischarge Mounting Flange

Compliance and Restrictions


This product contains a chemical that is regulated under California Proposition 65.

Warning: This product contains a chemical known to the State of California to cause cancer.

Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.

Alternate Products

Related Products


Rated 1 out of 5 by 1reviewer.
Rated 1 out of 5 by I have to replace these same blowers every years. They are only used in during the heating season and rarely last more than one season. Fortunately they are not too expensive and usually in stock, so buy extras. November 18, 2013
1-1 of 1
Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.

Product Q&A

(6 Questions : 6 Answers)

Ask your questions. Share your answers.

 
 
« Back
 
 
2 years, 2 months ago
by
Anonymous
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Operating temperature range: -20 to 104 degrees Fahrenheit
2 years, 2 months ago
by
Anonymous
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Need the exact flange and bolt hole dimensions so I can have my cabinet modified for mounting on the side wall
8 months ago
by
Read all my Q&A
 
Please wait while more information about RayValdes is loaded.
Additional information about RayValdes could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and has been advised by them of the following flange dimensions. Outlet Dimension [in] L x W 3 ¼ x 2 5/32, Flange mounting hole from center to-center [in] L x W 3 31/32 x 2 7/8,and Overall flange dimension [in] L x W 4 5/8 x 3 17/32.If you require more detailed information please give us a call. Thank you for using Grainger Ask and Answer.
8 months ago
by
Read all my Q&A
 
Please wait while more information about ChristopherK is loaded.
Additional information about ChristopherK could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
we run this motor on a 110 volt circulating oven at 180 and at 212 degrees f. will it work at 305 or do you have alternate choice?
7 months ago
by
Read all my Q&A
 
Please wait while more information about thunderhorse is loaded.
Additional information about thunderhorse could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and has been advised by them of the following.

You will need to know what the ambient air temp is if you are drawing in outside air. If this is taking air from inside the oven it will not work. I recommend calling out HVAC tech support team for possible options for this application, as there will be details required.

Thank you for using Grainger Ask and Answer.
7 months ago
by
Read all my Q&A
 
Please wait while more information about jmurillo is loaded.
Additional information about jmurillo could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
7 months ago
by
Read all my Q&A
 
Please wait while more information about Oakwood is loaded.
Additional information about Oakwood could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Per the manufacturer, not for use with speed controllers. If you need further assistance, please contact us at 1-800-Grainger. Thank you for using Grainger Ask & Answer.
7 months ago
by
Read all my Q&A
 
Please wait while more information about CorrieE is loaded.
Additional information about CorrieE could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
 
1 answer

Blower motor

I have a Mahoning outdoor furnace M#200 and need a blower motor for backup.
5 months, 1 week ago
by
Read all my Q&A
 
Please wait while more information about Dick7805 is loaded.
Additional information about Dick7805 could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
In order to better assist you we will need additional information. Please call 1-800-Grainger to speak with a Customer Service Agent. Thank you for using Grainger.com Ask & Answer.
5 months, 1 week ago
by
Read all my Q&A
 
Please wait while more information about KarenS is loaded.
Additional information about KarenS could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
Does Grainger sell the capacitor for blower model 1TDP7.
Capacitor specs:
3uf +/- 5%
250vac
CCC61 B
Thanks
jim
1 month, 3 weeks ago
by
Read all my Q&A
 
Please wait while more information about Solidwoods is loaded.
Additional information about Solidwoods could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and has been advised by them of the following. We do have a capacitor that will replace this one; it would be item 22F164.Thank you for using Grainger Ask and Answer.
1 month, 3 weeks ago
by
Read all my Q&A
 
Please wait while more information about ChristopherK is loaded.
Additional information about ChristopherK could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 of 1
1 of 1

Ask and Answer Disclaimer:
Grainger is neither responsible for, not does it endorse, the content of any statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger.

The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any statements posted, including statements posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such statements.

Use of any linked web site provided in a post is at the user's own risk. This site should not replace the use by you of any technical product manual or other professional resource or adviser available to you.

The source for the answers given by Grainger in Ask and Answer are based on the information provided with the question, which may not be complete or may not apply to other situations, and based on product literature and informational materials, the content of which is provided by Grainger's product suppliers. Grainger disclaims liability for any information it provides in Ask and Answer which later may be alleged or determined by a court of law to be inaccurate or incorrect.

The answers given by Grainger in Ask and Answer are not intended to replace or supplement any professional, engineering or other consultation services available to its product users. Always read, understand, and follow the product information and instructions provided by the manufacturer. same on category AAA as well