Skip Content

Cntrctr Table Saw,10 In Bld,5/8 In Arbr close
close x

Using 360° Viewing:

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.
How can we improve our Product Images?

Cntrctr Table Saw, 10 In Bld, 5/8 In Arbr


Price: $879.50 / each

Please sign in or register to access lists

  • Item # 2LDT4
  • Mfr. Model # 4100-09
  • UNSPSC # 27112709
  • Catalog Page # 1015
  • Shipping Weight 120.0 lbs.
Country of Origin ChinaCountry of Origin is subject to change.

Technical Specs

  • ItemContractor Table Saw
  • Blade Dia.10"
  • Arbor Size5/8"
  • Motor HP4
  • Amps AC15
  • No Load RPM3650
  • Blade TiltRight/Left
  • Depth of Cut @ 90 Deg.3-1/8"
  • Depth of Cut @ 45 Deg.2-1/2"
  • Cutting Capacity Rip Left9"
  • Cutting Capacity Rip Right25"
  • Table Surface w/Extension29 x 21-1/2"
  • Table Front of Blade10"
  • Overall Height36"
  • Overall Width40"
  • Overall Depth21-1/2"
  • Voltage120
  • Phase1
  • Hz60
  • MaterialAluminum
  • IncludesGravity Rise(TM) Table Saw Stand with Pneumatic Wheels
How can we improve our Technical Specifications?

Compliance and Restrictions


Alternate Products

Alternate Search Terms

Rated 4.8 out of 5 by 148reviewers.
Rated 4 out of 5 by Nice saw and stand -- silly wheels I love the saw, and except for some minor problems with ensuring that the rip fence is true it does a great job. The dust relief isn't the best either, particularly if cutting pressure treated wood (the sawdust sticks to the inside of the housing, even when using a shop vac. to catch the dust).But the pneumatic wheels have the inflation valve on the inside against the frame, so it's virtually impossible to pump up the tires without removing the wheel from the frame. This isn't a daily ritual but a couple of times each season when I want to roll the saw around and find the tires low, it's an extra half hour to do what should take two minutes! January 7, 2015
Rated 4 out of 5 by Wobbles on delivery. The motor/blade has a 1/32 wobble each way and has had from the beginning. I'm not a cabinet maker so it rarely has an impact on my work, which is why I gave it 4-stars. It's a good saw with lots of quality. I trust it to do the job. December 24, 2014
Rated 5 out of 5 by Great Saw and Stand Got my new 4100 table saw with gravity rise stand, great tool, accurate cuts, very versatile. Love the stand makes efficient storage in smaller shop or garage. November 10, 2014
Rated 5 out of 5 by Meets All Of My Requirements Perfect tool for my shop which has limited storage space. September 16, 2014
Rated 4 out of 5 by good but there are better I love all my Bosch tools, so when I came to buying a new table saw I decide to go with Bosch. This is a good saw that comes with a decent blade, but it has a couple of annoying shortcomings. It does not have a geared micro adjustment that some saws come with which I thought was unfortunate. It is also hard to read the ruler at a glance. The magnifier is small and obscures the whole number though it does magnify the fraction well. For this reason I bought the digital readout option with the saw but it broke the second time I used it and was a fairly complicated set-up and did not work properly when opening the saw to the 24 inch wide mode, I got a refund. The other thing that annoyed me about the saw was the gravity stand which comes up and down easy enough but the rubber tabs on the opposite side from the wheels are so low to the ground when you are moving it that they catch on everything, drop clothes, scraps on the floor etc. Wider inflatable wheels would also be an improvement.When first using the saw I thought the motor was bogging down, but after a while you realize that's just the way it is, it does slow down a little but does power well through large dimensional lumber. I recommend getting the optional width and length supports that some saws come with, they were cheap enough. Overall it's a good saw but I found after a year I was wishing I bought the rigid for less money or the Makita for more money. September 6, 2014
Rated 5 out of 5 by Sturdy stand and nice features I have owned this saw for a few years with no problems. The portable stand works well and was a big reason I bought this saw. I like the soft start for the blade motor and it has worked flawlessly. August 30, 2014
Rated 5 out of 5 by Very Portable Very satisfied with accuracy and ease of setup. Looking forward to trying out a new set of dado blades on it. August 15, 2014
Rated 1 out of 5 by Never again I bought two of these things over 6 years. At first they ran great, did everything I wanted them to do. After about 3 years, the motor froze on the first one. Then I bought a 2nd because I was in the middle of a job and thinking the first was was a fluke, and didn't want to mess around, but after two years plus or minus, it started to run slooowly so I chucked it in the corner with the other one and there they sit collecting dust. August 9, 2014
2 3 4 5 6next>>

Product Reviews Disclaimer:
Grainger is neither responsible for, nor does it endorse, the content of any product review or statement posted. Any statements posted constitute the statements of the poster and are not the statements of Grainger. The statements posted by Grainger employees with the Grainger employee badge represent the views of such employees and are not the statements of Grainger. Grainger makes no representations as to the appropriateness, accuracy, completeness, correctness, currentness, suitability, or validity of any product review or statements posted, including those posted by employees with the Grainger employee badge, and is not liable for any losses, injuries or damages which may result from any such product review or statements. Use of any linked web site provided in a product review or post is at the user's own risk.