Insulated Hand Tools
Insulated hand tools, which were a part of OSHA's 1990 guidelines for electrical safety in the workplace, can help prevent worker fatalities when they're used near energized circuits.
Insulated tool sets are individually tested and certified by the manufacturer for specific working conditions. Generally, the maximum rated voltage for insulated tools is 1000 volts AC and 1500 volts DC. When buying insulated hand tools, look for compliance with the International Electrotechnical Commission (IEC), the American Society for Testing and Materials (ASTM) and/or the Deutsches Institute for Normung (DIN-German Standard). The ASTM, IEC and DIN do not test the tools for compliance. Manufacturers do their own testing, but these organizations set the performance requirements for the insulation. The Association of German Electro Technicians (VDE) is an independent agency that tests a sample of each tool to ensure compliance.
- Keep tools clean and dry
- Inspect insulation before each use
- If you doubt the integrity of the insulation, destroy the tool or have it retested
- Follow the manufacturer's temperature recommendations for use
- Have a qualified person inspect and recertify tools annually for safe use
- Use other personal protective equipment as necessary
Commonly Asked Questions
The Deutsches Institute for Normung (DIN-German Standard)
American Society for Testing and Materials
International Electrotechnical Commission
Electrical Safeguards for Personnel Protection: 29 CFR 1910.335
Electrical Protective Devices: 29 CFR 1910.137
Find even more information you can use to help make informed decisions about the regulatory issues you face in your workplace every day. View all Quick Tips Technical Resources at www.grainger.com/quicktips.
Think Safety. Think Grainger.®
Grainger has the products, services and resources to help keep employees safe and healthy while operating safer facilities. You’ll also find a network of safety resources that help you stay in compliance and protect employees from hazardous situations. Count on Grainger for lockout tagout, fall protection equipment, confined space products, safety signs, personal protective equipment (PPE), emergency response and so much more!
The content in this newsletter is intended for general information purposes only. This publication is not a substitute for review of the applicable government regulations and standards, and should not be construed as legal advice or opinion. Readers with specific compliance questions should refer to the cited regulation or consult with an attorney.
©2012 W.W. Grainger, Inc.