Employee Emergency & Fire Prevention Plans
Employee emergency and fire prevention plans may vary to comply with specific company operation, but should follow the guidelines set by OSHA. Plans must include procedures for evacuating physically impaired workers. All employees must be familiar with the evacuation signal, whether it be communicated verbally or by bells, whistles or sirens. The alarm system must comply with scope, application, general requirements, installation and restoration, maintenance, testing and manual operation as stated in 1910.165.
Emergency plans should include the following according to CFR 1910.38:
- Emergency escape procedures and escape route assignments
- Procedures to be followed by employees who remain to operate critical plan operations before they evacuate
- Procedures to account for all employees after emergency evacuations have been completed
- Rescue and medical duties for those employees who are to perform them
- The preferred means of reporting fires and other emergencies
- Names or regular job titles of persons or department who can be contacted for further information or explanation of duties under the plan
Employees should know the alarm procedure, where to find alarms and how to sound or activate them. Emergency phone numbers should be posted by phones. Employees should respond immediately when the alarm is sounded, whether it is a drill or an actual fire. Personal work areas should be secured, if time permits, by turning off machinery or equipment, securing hazardous materials or locking up confidential documents.
Evacuation routes must be indicated by signs or workplace maps outlining alternate escape routes. These must be posted in visible locations. A plan must include a designated area to meet for a head count immediately after evacuation.
According to CFR 1910.39, fire prevention plans should include the following:
- A list of the major workplace hazards, their proper handling and storage procedures and potential ignition sources, including equipment/systems installed specifically to handle a fire involving them
- Names/job titles of personnel responsible for maintenance of equipment and fire prevention and control devices installed within specific equipment
- Names/job titles of personnel responsible for fuel source hazard control
- A list of systems installed on heat-producing equipment to prevent accidental ignition of combustible material
- Procedures to control accumulations of flammable and combustible waste materials
Establishing emergency plans and facilitating employee training help prevent fire deaths and injuries in the workplace. Saving lives is the goal for employee emergency and fire prevention plans. The plans only work if people know and follow the procedures.
|Q.||Why is it important to meet for a head count in the event of an emergency or fire?|
|A.||It is crucial to have a designated place to meet after the evacuation process. The head count helps to determine if anyone might possibly be trapped in the building. Failing to report to this designated meeting place could endanger the life of someone who re-enters the building in an attempt to find a missing person.|
|Q.||Why is it important to keep exits clear?|
|A.||It is important to keep paths, escape routes and aisles clear to ensure everyone can quickly exit the building. Clutter and debris might prohibit an exit door from opening to allow for escape.|
Find even more information you can use to help make informed decisions about the regulatory issues you face in your workplace every day. View all Quick Tips Technical Resources at www.grainger.com/quicktips.
Think Safety. Think Grainger.®
Grainger has the products, services and resources to help keep employees safe and healthy while operating safer facilities. You’ll also find a network of safety resources that help you stay in compliance and protect employees from hazardous situations. Count on Grainger for lockout tagout, fall protection equipment, confined space products, safety signs, personal protective equipment (PPE), emergency response and so much more!
The content in this newsletter is intended for general information purposes only. This publication is not a substitute for review of the applicable government regulations and standards, and should not be construed as legal advice or opinion. Readers with specific compliance questions should refer to the cited regulation or consult with an attorney.
©2015 W.W. Grainger, Inc.