Skip Content

Filter Results By

Applied Filters Clear All

Brand
Price
  • View MoreView Less
Shop By

Toolholder Accessories

8 Results Found that Include 8 Products 

Results per page: 16 | 32 | 48
    Lathe Jaws,Soft,Al,T/G,4.875
    • H&R MFG
    • Lathe Jaws, Soft, Al, T/G, 4.875
    • Item # 4HEF4
    • Mfr. Model # HR-454-A
    • Lathe Jaws, Soft, Aluminum, Tongue and Groove, American T and G, Length 4.875, Width 1.75, Height 2.375, For...More

    Lathe Jaws,Soft,Al,T/G,2.625,1.25
    • H&R MFG
    • Lathe Jaws, Soft, Al, T/G, 2.625,1.25
    • Item # 4HEN2
    • Mfr. Model # HR-471-A
    • Lathe Jaws, Soft, Aluminum, Tongue and Groove, American T and G, Length 2.625, Width 1.25, Height 3.375, For...More

    Collet Wrench,Open End,7/8,DA
    Pull Stud Retention Knob,CAT-V,50 Taper
    • SANDVIK COROMANT
    • Pull Stud Retention Knob, CAT-V, 50 Taper
    • Item # 44X606
    • Mfr. Model # 393.45C-50 1-60M
    • Pull Stud Retention Knob, CAT-V, Shank 50 Taper, Angle 60 Degrees , Bolt Size 1 In-8 UNC, Dia. 1.5 In, Neck...More

    Pull Stud Retention Knob,CAT-V,50 Taper
    • SANDVIK COROMANT
    • Pull Stud Retention Knob, CAT-V, 50 Taper
    • Item # 44X607
    • Mfr. Model # 393.45C-50 1-45-2M
    • Pull Stud Retention Knob, CAT-V, Shank 50 Taper, Angle 45 Degrees , Bolt Size 1 In-8 UNC, Dia. 1.37 In, Neck...More

    Pull Stud Retention Knob,CAT-V,50 Taper
    • SANDVIK COROMANT
    • Pull Stud Retention Knob, CAT-V, 50 Taper
    • Item # 44X608
    • Mfr. Model # 393.45C-50 1-45-4M
    • Pull Stud Retention Knob, CAT-V, Shank 50 Taper, Angle 45 Degrees , Bolt Size 1 In-8 UNC, Dia. 1.43 In, Neck...More

    Collet Wrench,Standard,ER20
    Lathe Jaws,Soft,T/G,3.937,1.25,3.375
    • H&R MFG
    • Lathe Jaws, Soft, T/G, 3.937,1.25,3.375
    • Item # 4HEJ3
    • Mfr. Model # HR-486-P
    • Lathe Jaws, Soft, Tongue and Groove, American T and G, Length 3.937, Width 1.25, Height 3.375, For Use With...More

    Results per page: 16 | 32 | 48