Skip Content

Filter Results By

Brand
  • View MoreView Less
Price
  • View MoreView Less
Shop By

Toolholder Accessories

252 Results Found that Include 252 Products 

Results per page: 16 | 32 | 48
Collet Wrench,Open End,1 1/4,DA180
Ret Knob,ANSI/ISO,1-8,45 Deg,w/Hole
  • PARLEC
  • Ret Knob, ANSI/ISO, 1-8,45 Deg, w/Hole
  • Item # 2MLR9
  • Mfr. Model # 50TRK
  • Retention Knob, ANSI/ISO, Style 1, Thread 1-8, 45 Deg, Knob 1.140 In, Neck Dia. 0.820 In., Overall Length...More

Lathe Jaws,Soft,Al,T/G,5.625
  • H&R MFG
  • Lathe Jaws, Soft, Al, T/G, 5.625
  • Item # 4HEF5
  • Mfr. Model # HR-456-A
  • Lathe Jaws, Soft, Aluminum, Tongue and Groove, American T and G, Length 5.625, Width 2.0, Height 2.312, For...More

Retention Knob,MAS-BT,5/8-11,45 Deg
  • PARLEC
  • Retention Knob, MAS-BT, 5/8-11,45 Deg
  • Item # 2MLN8
  • Mfr. Model # 4005TRK
  • Retention Knob, MAS-BT, Style 1, Thread 5/8-11, 45 Deg, Knob 0.588 In, Neck Dia. 0.393 In., Overall Length...More

Collet Chuck,0.031-0.250,DA300,0.5 In
  • PARLEC
  • Collet Chuck, 0.031-0.250, DA300,0.5 In
  • Item # 2MLN1
  • Mfr. Model # EXT500
  • Collet Chuck, Straight Shank Double-Angle Extensions, Capacity 0.031-0.250, DA300, Shank Dia 0.5 In, Shank...More

Chuck Jaw,Rev,6 In Chucks,PK 3
Retention Knob,MAS-BT,5/8-11,45 Deg
  • PARLEC
  • Retention Knob, MAS-BT, 5/8-11,45 Deg
  • Item # 2MLP3
  • Mfr. Model # 4009TRK
  • Retention Knob, MAS-BT, Style 1, Thread 5/8-11, 45 Deg, Knob 0.588 In, Neck Dia. 0.393 In., Overall Length...More

Chuck Jaw,Soft,T/G,15 In Chucks
Lathe Jaws,Soft,T/G,5.625,2.0,3.937
  • H&R MFG
  • Lathe Jaws, Soft, T/G, 5.625,2.0,3.937
  • Item # 4HEJ1
  • Mfr. Model # HR-480
  • Lathe Jaws, Soft, Tongue and Groove, American T and G, Length 5.625, Width 2.0, Height 3.937, For Use With...More

Chuck Jaw,Soft,T/G,8 In Chucks
Collet Wrench,Pin Spanner,ER25
Pull Stud Retention Knob,BT,30 Taper
  • SANDVIK COROMANT
  • Pull Stud Retention Knob, BT, 30 Taper
  • Item # 44X622
  • Mfr. Model # 393.55C-30 M12-60BR
  • Pull Stud Retention Knob, BT, Shank 30 Taper, Angle 60 Degrees , Bolt Size M12, Dia. 16.5mm, Neck Dia. 7.5mm...More

Jaw Nut,Steel,12 In Kitagawa B-12,PK 3
Ret Knob,ANSI/ISO,5/8-11,45 Deg,w/Hole
  • PARLEC
  • Ret Knob, ANSI/ISO, 5/8-11,45 Deg, w/Hole
  • Item # 2MLR1
  • Mfr. Model # 40TRK
  • Retention Knob, ANSI/ISO, Style 1, Thread 5/8-11, 45 Deg, Knob 0.740 In, Neck Dia. 0.490 In., Overall Length...More

Pull Stud Retention Knob,BT,30 Taper
  • SANDVIK COROMANT
  • Pull Stud Retention Knob, BT, 30 Taper
  • Item # 44X621
  • Mfr. Model # 393.55C-30 M12-45FA
  • Pull Stud Retention Knob, BT, Shank 30 Taper, Angle 45 Degrees , Bolt Size M12, Dia. 16.5mm, Neck Dia. 8mm...More

Retention Knob,MAS-BT,1-8,60 Deg,w/Hole
  • PARLEC
  • Retention Knob, MAS-BT, 1-8,60 Deg, w/Hole
  • Item # 2MLR7
  • Mfr. Model # 5014TRKC
  • Retention Knob, MAS-BT, Style 1, Thread 1-8, 60 Deg, Knob 0.904 In, Neck Dia. 0.667 In., Overall Length 3.07...More

Collet Wrench,Pin Spanner,100PG/150PG
Retention Knob,MAS-BT,M12X1.75,45 Deg
  • PARLEC
  • Retention Knob, MAS-BT, M12X1.75,45 Deg
  • Item # 2MLN4
  • Mfr. Model # 3003TRK
  • Retention Knob, MAS-BT, Style 2, Thread M12X1.75, 45 Deg, Knob 0.430 In, Neck Dia. 0.273 In., Overall Length...More

Bushing,Power Milling,0.5 In,2.75 In L
Chuck Jaw,Soft,12mm,60 Deg,PK 3
  • H&R MFG
  • Chuck Jaw, Soft, 12mm, 60 Deg, PK 3
  • Item # 2REA1
  • Mfr. Model # HR-149-2.0
  • Chuck Jaw, Soft, 60 Deg Serrated, 1.5mm, Bolt Size 12mm, For Use With 8 In Kitagawa, 8 In Matsumoto, 8 In...More

Lathe Jaws,Soft,Al,T/G,4.875
  • H&R MFG
  • Lathe Jaws, Soft, Al, T/G, 4.875
  • Item # 4HEF4
  • Mfr. Model # HR-454-A
  • Lathe Jaws, Soft, Aluminum, Tongue and Groove, American T and G, Length 4.875, Width 1.75, Height 2.375, For...More

Retention Knob,MAS-BT,5/8-11,45 Deg
  • PARLEC
  • Retention Knob, MAS-BT, 5/8-11,45 Deg
  • Item # 2MLT1
  • Mfr. Model # C400TRK
  • Retention Knob, MAS-BT, Style 1, Thread 5/8-11, 45 Deg, Knob 0.588 In, Neck Dia. 0.406 In., Overall Length...More

Collet Chuck,0.031-0.391,DA200,0.75 In
  • PARLEC
  • Collet Chuck, 0.031-0.391, DA200,0.75 In
  • Item # 2MLN3
  • Mfr. Model # EXT750
  • Collet Chuck, Straight Shank Double-Angle Extensions, Capacity 0.031-0.391, DA200, Shank Dia 0.75 In, Shank...More

Collet Wrench,Open End,2-1/4,100PG
  • PARLEC
  • Collet Wrench, Open End, 2-1/4,100PG
  • Item # 2MLT8
  • Mfr. Model # 100HCNW
  • Collet Wrench, Open End, Single-Angle, 2-1/4, 100PG, For Use With 100PG Collet System, Overall Length 9-1/2...More

Lathe Jaw,Soft,Al,Off,Pt,6.25,Pk 3
  • H&R MFG
  • Lathe Jaw, Soft, Al, Off, Pt, 6.25, Pk 3
  • Item # 4HEE7
  • Mfr. Model # HR-112-2.5-OP-A
  • Lathe Jaws, Soft, Offset, Pointed, Aluminum, Serrated 1.5mm, 60 Degrees, Length 6.25, Width 2.0, Height 2.5,...More

Chuck Jaw,Soft,T/G,8 In Chucks
Chuck Jaw,Soft,60 Deg,12mm,PK 3
  • H&R MFG
  • Chuck Jaw, Soft, 60 Deg, 12mm, PK 3
  • Item # 2REA9
  • Mfr. Model # HR-82-2.0-OP
  • Chuck Jaw, Soft, 60 Deg Serrated, 1.5mm, Bolt Size 12mm, For Use With B-10 Kitagawa, B-210 Kitagawa, 11 In...More

Lathe Jaws,Soft,Al,T/G,Pt,5.75
  • H&R MFG
  • Lathe Jaws, Soft, Al, T/G, Pt, 5.75
  • Item # 4HEF9
  • Mfr. Model # HR-466-P-A
  • Lathe Jaws, Soft, Aluminum, Pointed, Tongue and Groove, American T and G, Length 5.75, Width 1.75, Height...More

Lathe Jaws,Soft,T/G,4.25,1.5,3.375
  • H&R MFG
  • Lathe Jaws, Soft, T/G, 4.25,1.5,3.375
  • Item # 4HEH8
  • Mfr. Model # HR-476
  • Lathe Jaws, Soft, Tongue and Groove, American T and G, Length 4.25, Width 1.5, Height 3.375, For Use With...More

Lathe Jaw,Soft,Al,1.5mm,1.25,60 Deg,Pk 3
  • H&R MFG
  • Lathe Jaw, Soft, Al, 1.5mm, 1.25,60 Deg, Pk 3
  • Item # 4HEE3
  • Mfr. Model # HR-6K-1.5-P-A
  • Lathe Jaws, Soft, Aluminum, Pointed, Serrated 1.5mm, 60 Degrees, Length 3.125, Width 1.25, Height 1.5, For...More

Lathe Jaws,Soft,Pt,Ser,60 Deg,3.125,Pk 3
  • H&R MFG
  • Lathe Jaws, Soft, Pt, Ser, 60 Deg, 3.125, Pk 3
  • Item # 4HEG8
  • Mfr. Model # HR-6K-3.0-P
  • Lathe Jaws, Soft, Pointed, Serrated, 60 Degrees, Length 3.125, Width 1.25, Height 1.5, For Use With 6 In...More

Retention Knob,MAS-BT,5/8-11,90 Deg
  • PARLEC
  • Retention Knob, MAS-BT, 5/8-11,90 Deg
  • Item # 2MLN5
  • Mfr. Model # 4001TRK
  • Retention Knob, MAS-BT, Style 1, Thread 5/8-11, 90 Deg, Knob 0.588 In, Neck Dia. 0.393 In., Overall Length...More

Results per page: 16 | 32 | 48

Get toolholder accessories from Grainger to help achieve expert results in milling, drilling, cutting and tapping machine operations. Mild steel and aluminum chuck jaws can perform easy, accurate turning. Hardened-steel chuck jaws can provide the strength you need for medium- to heavy-duty turning applications. A collet wrench can loosen and tighten collets to help change bits or attachments. Shop Grainger for toolholder accessories today!