Skip Content

Filter Results By

Respiratory Equipment

Some employees face situations when air quality can be compromised. Air particles, vapors, gases, dust and insufficient oxygen can all pose respiratory safety risks for your workers. With the help of Grainger, you can provide your workers with the safety equipment they need to breathe safely on the job. We carry everything from gas masks to personal air purifying systems so your team can breathe well, no matter what situation they face.

Product Categories

Respiratory Q&A

Safety
>
Respiratory
(12 Questions : 20 Answers)

Ask your questions. Share your answers.

 
 
« Back
 
 
I sweat profusely and need to use a respirator when working around pollins. The respirator that I have now clogs up from sweat and I can't breath at all. Can you put me on to a respirator that works well for pollens and doesn't clog up with sweat? Thank you
Gender: Male
Field of Industry:: Outdoor work
2 years, 4 months ago
by
Anonymous
Near Seattle, Washington
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
I can't really endorse a specific brand but in my experience dealing with sweat in the mask is much like dealing with long hair in your face, you flick your head and give a good blow. Do this with your head tipped so that the sweat in the mask gets blown out the waste vent(s).

If you're using simple pressed-felt-on-face masks, simply stop using them. They're primarily to stop direct large particulate aspiration and aren't very effective against pollens. They aren't very effective at letting air through either and for the most part tend to allow a large amount of bypass.

Several brands of silicone masks carry simple HEPA-only cartridges, it would be worth your time to investigate them.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about thunderloon is loaded.
Additional information about thunderloon could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
Typically and N95 respirator is sufficient for pollen and dust. The 95 refers to the efficiency of the filter, so the 95 is 95 percent efficient for .3 micron particles. The 99 and 100 levels are therefore more efficient. If the mask is warm and uncomfortable, you may wish to try a mask with an exhalation valve. They allow your exhaled breath to escape the confines of the mask easier and are typically cooler and more comfortable to wear. If moisture saturation of the mask is a problem, you may need a half mask respirator with changeable cartridges. These masks typically have 95 and 100 level filters available. The face seal may create more heat where it is in contact with the user, but the material is unaffected by moisture. These masks also have exhalation valves to help keep them cool.
The source for the answers given by Grainger in Ask and Answer are based on the information provided with the question, which may not be complete or may not apply to other situations, and based on product literature and informational materials, the content of which is provided by Grainger’s product suppliers. Grainger disclaims liability for any information it provides in Ask and Answer which later may be alleged or determined by a court of law to be inaccurate or incorrect. The answers given by Grainger in Ask and Answer are not intended to replace or supplement any professional, engineering or other consultation services available to its product users. Always read, understand, and follow the product information and instructions provided by the manufacturer.
2 years, 4 months ago
by
Read all my Q&A
 
Please wait while more information about JeremyE is loaded.
Additional information about JeremyE could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Answer: 
A good full-face respirator with an appropriate cartridge and a P-100 designation will provide you with adequate respiratory protection.

If you have trouble with excessive sweating and the face piece fogging up, then you might consider upgrading to a positive pressure respirator instead. An SCBA, a PAPR or airline supplied system, with the air blasting into your face should minimize fogging and actually cool your face a little as well. The cost is greater, but these systems can work miracles.
1 year, 11 months ago
by
Read all my Q&A
 
Please wait while more information about David888 is loaded.
Additional information about David888 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
I am looking for a North FF respirator, 1/2 face, and N95 for a co-worker needing to be respirator trained.
Gender: Male
Field of Industry:: Department of Agriculture
Product used for:: N95 and Full-Face Respirators
Years purchasing from Grainger:: 3
2 years, 4 months ago
by
Yakima, WA, USA
Read all my Q&A
 
Please wait while more information about Truk is loaded.
Additional information about Truk could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
2 People need an answerI have this question too

Answers

Answer: 
We carry a variety of respirators that come in size small you can select from.

To view the selections we have available on Grainger.com in the search box enter PG 2530. This will display pages from our catalog. From there you will be able to flip through the pages of our catalog. You can see the sizes and options available in full face, half face and disposable respirators.
2 years, 4 months ago
by
Read all my Q&A
 
Please wait while more information about AngieO is loaded.
Additional information about AngieO could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
I have found that the North full face respirator fits well on people with smaller and also with larger faces. In my experience, the MSA brand does better on people with average size faces.
1 year, 11 months ago
by
Read all my Q&A
 
Please wait while more information about David888 is loaded.
Additional information about David888 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
2 years, 2 months ago
by
Read all my Q&A
 
Please wait while more information about ncsupac is loaded.
Additional information about ncsupac could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and have been advised by them of the following: The model number of the respirator will be located on the top of the face piece, near where it rests on the forehead. If there is a model number followed by the letter “S”, you have a size small. If there is only a model number, then you have the medium/ large size.
Thank you for using Grainger Ask and Answer
Kristen
2 years, 2 months ago
by
Read all my Q&A
 
Please wait while more information about Kristen is loaded.
Additional information about Kristen could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
The face piece size, on the North, Model 5400 full-face respirator, is located just above the plexi glass face piece on the forehead gasket. In the grey-colored rubber part.
1 year, 11 months ago
by
Read all my Q&A
 
Please wait while more information about David888 is loaded.
Additional information about David888 could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
3 months, 3 weeks ago
by
Read all my Q&A
 
Please wait while more information about lukebranchwalker is loaded.
Additional information about lukebranchwalker could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has contacted the product supplier and has been advised by them of the following:

The correct respirator can only be chosen by knowning what the respiratory hazard you would be exposed to. Please feel free to contact your local branch or Customer Service at 800-GRAINGER to be connected with a Technical Product Support representative to discuss the hazards and exposure levels.

Thank you for using Grainger Ask and Answer.
3 months, 3 weeks ago
by
Read all my Q&A
 
Please wait while more information about MichelleS is loaded.
Additional information about MichelleS could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0

Answer: 
heavy dusty areas mostly, this mask is to be used with air cleaner generator. Imported from poland and UK. not cheap
2 months, 1 week ago
by
Read all my Q&A
 
Please wait while more information about reymisterio is loaded.
Additional information about reymisterio could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 year, 5 months ago
by
Read all my Q&A
 
Please wait while more information about butterscotch is loaded.
Additional information about butterscotch could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Rodent droppings and nests are typically attributed to the Hantavirus. According to the Centers for Disease Control and Prevention (CDC) a half mask air purifying respirator equipped with P100 cartridges should be used.

Thank you for using Grainger Ask and Answer.
1 year, 5 months ago
by
Read all my Q&A
 
Please wait while more information about KelliB is loaded.
Additional information about KelliB could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0

Answer: 
As with most questions about dealing with particulates, you want a HEPA filter with one or two layers of pre-filter material.

In the specific case of cleaning up rodent droppings, if you do it a lot you'll probably want a full face mask respirator to keep any debris and dust out of your eyes as well.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about thunderloon is loaded.
Additional information about thunderloon could not be loaded.
+1point
1out of 1found this answer helpful.
Was this helpful?helpful1unhelpful0
Has staff answer
 
2 answers

best dust for protection from chemical dust

1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about kermit is loaded.
Additional information about kermit could not be loaded.
0points
0out of 0found this question helpful.
Was this helpful?helpful0unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
In order to better assist you we will need additional information. Please call 1-800-Grainger to speak with a Customer Service Agent.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about CorrieE is loaded.
Additional information about CorrieE could not be loaded.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3

Answer: 
What kind of environment and what kind of chemical dust?
There are many standards for safety and depending on what chemical you're worried about you may be looking at buying a head-covering full face mask respirator with body suit.

Generally there will be guidelines available in the instructional or MSDS material associated with the chemical(s) you are working with.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about thunderloon is loaded.
Additional information about thunderloon could not be loaded.
-3points
0out of 3found this answer helpful.
Was this helpful?helpful0unhelpful3
I have COPD. and spend lots of time in a dusty environment, and around camp fires?
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about Masks is loaded.
Additional information about Masks could not be loaded.
+2points
2out of 2found this question helpful.
Was this helpful?helpful2unhelpful0
1 Person needs an answerI have this question too

Answers

Answer: 
Grainger has received your question and due to the nature of the question, is unable to provide an answer at this time.

Thank you for using Grainger Ask and Answer.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about MichelleS is loaded.
Additional information about MichelleS could not be loaded.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2

Answer: 
You want a mask with HEPA filtration and a pre-filter cover. Much of what is bothering you will be caught by one - or two stacked - pre filter layers and the rest taken out by the HEPA. Read around to see which masks have the largest surface area available and watch for the weight of the gear. After a few hours some masks can really get you down and if you're moving around cross country a mask that bounces off is near to useless.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about thunderloon is loaded.
Additional information about thunderloon could not be loaded.
0points
0out of 0found this answer helpful.
Was this helpful?helpful0unhelpful0
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about boilerman is loaded.
Additional information about boilerman could not be loaded.
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1
1 Person needs an answerI have this question too

Answers

Answer: 
Use a NIOSH-/MSHA-approved respirator. Exposure level should determine the type. See 29 CFR 1926.62 for the complete regulation. For a summary of the regulation please see Grainger Quick tip #165; Construction Lead: Identification, Remediation and Personal Protection, 29 CFR 1926, located in the Resource tab.
1 year, 4 months ago
by
Read all my Q&A
 
Please wait while more information about MichelleS is loaded.
Additional information about MichelleS could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
We have a person that has an allergic reaction, headaches, from the smell of bleach. The type of job we do requires working with bleach for about an hour each day. Several of us work in one room so the smell of bleach is pretty strong. Is there a respirator she can wear to eliminate her allergic reaction?
1 year ago
by
Read all my Q&A
 
Please wait while more information about allergies is loaded.
Additional information about allergies could not be loaded.
+1point
2out of 3found this question helpful.
Was this helpful?helpful2unhelpful1
1 Person needs an answerI have this question too

Answers

Answer: 
In order to determine what type of cartridge is appropriate, we would need to know more about the environment. Is there sufficient oxygen and what the concentration of the exposure will be. Once this information is know we can select the appropriate cartridge.

Thank you for using Grainger Ask and Answer.
1 year ago
by
Read all my Q&A
 
Please wait while more information about KelliB is loaded.
Additional information about KelliB could not be loaded.
-1point
0out of 1found this answer helpful.
Was this helpful?helpful0unhelpful1
We have good ventalation in our kitchens. What respirator would you suggest. We have 4-8 employees in each of our kitchens and I'm sure they would not want to share.

Thanks,
11 months ago
by
Read all my Q&A
 
Please wait while more information about Lisalou is loaded.
Additional information about Lisalou could not be loaded.
-1point
0out of 1found this question helpful.
Was this helpful?helpful0unhelpful1
1 Person needs an answerI have this question too

Answers

Answer: 
In order to better assist you we will need additional information. Please call 1-800-Grainger Monday-Friday 7AM-7PM to speak with a Technical Product Support Specialist.

Thank you for using Grainger Ask & Answer
11 months ago
by
Read all my Q&A
 
Please wait while more information about AngelaK is loaded.
Additional information about AngelaK could not be loaded.
-2points
0out of 2found this answer helpful.
Was this helpful?helpful0unhelpful2
2next>>
2next>>