Skip Content

Filter Results By

Applied Filters Clear All

Raw Materials

440 Results Found that Include 705 Products

Product availability based on selecting either shipping or pick up and a location. Dismiss
Results per page:  16 | 32 | 48
Sponge Stripping,EPDM,1/4x1 In,50 Ft.
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Sponge Stripping, EPDM, 1/4x1 In, 50 Ft. Sponge Stripping, EPDM
  • Item # 6YGU2
  • Mfr. Model # CCE251/4X150T
  • Sponge Stripping, Gasket/Cushion/Seal, Closed Cell, EPDM, Thickness 1/4 In., Width 1 In., Length 50 Ft.,...More

  • Category : Rubber Rolls
Angle Stock,304SS,1/8 In T,2 In Leg,7 ft
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Angle Stock, 304SS, 1/8 In T, 2 In Leg, 7 ft Angle Stock,304SS,1/8 In T,2 In Leg,7 ft
  • Item # 4YTN2
  • Mfr. Model # 4YTN2
  • 90 Degree Angle Stock, General Purpose, Stainless Steel, Alloy Type 304, Thickness 1/8 In, Leg Length 2 In,...More

  • Category : Stainless Steel Angle Stock
Carbon Steel Angle Stock, 90° Angle, Low Carbon Alloy&#
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Carbon Steel Angle Stock, 90° Angle, Low Carbon Alloy Type Carbon Steel Angle Stock, 90° Angle, Low Carbon Alloy Type
  • Item # 2AHN1
  • Mfr. Model # 2AHN1
  • Angle Stock, 90 Degrees , Carbon Steel, Alloy Type Low Carbon, Thickness 1/4 In., Leg Length 3 In., Length 6...More

  • Category : Carbon Steel Angle Stock
Oil Hard Flat Stock,O1,2In Wx36In L
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Oil Hard Flat Stock, O1,2In Wx36In L Oil Hard Flat Stock,O1,2In Wx36In L
  • Item # 33E636
  • Mfr. Model # O113226
  • Oil Hard Flat Stock, Steel Material, Width 2 In., Thickness 1/32 In., Finish RMS 45 Max, Length 36 In.,...More

  • Category : Flat Stock
Aluminum Plate Stock, Tread Pattern, Alloy Type 3003, Brigh
Aluminum Plate Stock, Tread Pattern, Alloy Type 3003, Brigh
Sponge Sheet,Vinyl-Nitrile,1/8x54x72 In
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Sponge Sheet, Vinyl-Nitrile, 1/8x54x72 In Sponge Sheet, Gasket/Seal/Cushion, 15-35 (Shore 00)
  • Item # 6YHA2
  • Mfr. Model # CCVN25-1/854X72
  • Sponge Sheet, Gasket/Seal/Cushion, Closed Cell, Vinyl-Nitrile, Thickness 1/8 In., Width 54 In., Length 72...More

  • Category : Rubber Sheets and Strips
Rod,Brass,360,5/8 Dia x 3 Ft L
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Rod, Brass, 360,5/8 Dia x 3 Ft L Rod,Brass,360,5/8 Dia x 3 Ft L
  • Item # 2ABK6
  • Mfr. Model # BR360/58-36
  • Rod Stock, General Purpose, Brass, Alloy Type 360, Diameter 5/8 In, Length 3 Ft, Mill Finish, Temper Half...More

  • Category : Brass Rod Stock
Trim Seal,Alum Clip,0.42 In W,25 Ft
Trim Seal,Alum Clip,0.3 In W,25 Ft
Rod Stock,Brass,3/8 in. x 3 ft.,PK3
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Rod Stock, Brass, 3/8 in. x 3 ft., PK3 Rod Stock,Brass,3/8 in. x 3 ft.,PK3
  • Item # 16NH97
  • Mfr. Model # 1167
  • Rod Stock, General Purpose, Brass, Alloy Type 260, Diameter 3/8 In., Length 3 ft., Mill Finish, Temper 1/2 -...More

  • Category : Brass Rod Stock
Foam Sheet,AntiStatic Poly,1x54x82
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Foam Sheet, AntiStatic Poly, 1x54x82 Foam Sheet, Anti-Static Polyurethane
  • Item # 5GDL7
  • Mfr. Model # 5GDL7
  • Foam Sheet, Open Cell, Material Anti-Static Polyurethane, Thickness 1 In, Width 54 In, Length 82 In, Finish...More

  • Category : Foam Blanks, Flats, Bars, Plates, and Sheet Stock
U-Channel,AL 6063,2 In Leg,2 In x 8 ft
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • U-Channel, AL 6063,2 In Leg, 2 In x 8 ft U-Channel,AL 6063,2 In Leg,2 In x 8 ft
  • Item # 6ALX9
  • Mfr. Model # 6ALX9
  • U-Channel, Corrosion Resistant, Aluminum, Alloy Type 6063, Leg Length 2", Base Width 2", Wall Thickness...More

  • Category : Aluminum U-Shaped Channel Stock
Roll,UHMW,0.020 In Th,4 In x50 Ft,White
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Roll, UHMW, 0.020 In Th, 4 In x50 Ft, White Roll,UHMW,0.020 In Th,4 In x50 Ft,White
  • Item # 4CDF5
  • Mfr. Model # 4CDF5
  • Roll Stock, Wear-Strip, Virgin Food Contact Grade, UHMW, Ultra High Molecular Weight, Thickness 0.020 In,...More

  • Category : Plastic Rolls
Square Stock,Brass,360,1 x 1 In,1 Ft L
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Square Stock, Brass, 360,1 x 1 In, 1 Ft L Square Stock,Brass,360,1 x 1 In,1 Ft L
  • Item # 2ABH1
  • Mfr. Model # BSQ360/1-12
  • Square Stock, General Purpose, Brass, Alloy Type 360, Thickness 1 In, Width 1 In, Length 1 Ft, Mill Finish,...More

  • Category : Brass Blanks, Flats, Bars, Plates, and Sheet Stock
Rubber Cord,Buna,5/16 In Dia,100 Ft.
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Rubber Cord, Buna, 5/16 In Dia, 100 Ft. Rubber Cord,Buna,5/16 In Dia,100 Ft.
  • Item # 6VFE1
  • Mfr. Model # CSBUNA-5/16/100
  • Rubber Cord Stock, Round, Material Buna, Length 100 Ft., Diameter 5/16 In., Tolerance +/-.012 In.,...More

  • Category : Rubber Cord
Music Wire,Type 302 SS,3,0.012 In
  • PRECISION BRAND
  • Music Wire, Type 302 SS, 3,0.012 In Music Wire,Type 302 SS,3,0.012 In
  • Item # 5XE86
  • Mfr. Model # 29012
  • Music Wire, Type 302 Spring Tempered, Full Hard, Stainless Steel, Wire Gauge Number 3 American S & W Music...More

  • Category : Stainless Steel Music Wire
Trim Seal,Alum Clip,0.42 In W,25 Ft
Trim Seal,Alum Clip,0.42 In W,25 Ft
Trim Seal,Alum Clip,0.36 In W,25 Ft
Air Hard Flat Stock,A2,2-1/2In Wx18In L
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Air Hard Flat Stock, A2,2-1/2In Wx18In L Air Hard Flat Stock,A2,2-1/2In Wx18In L
  • Item # 33C853
  • Mfr. Model # A25162128
  • Air Hard Flat Stock, Steel Material, Width 2-1/2 In., Thickness 5/16 In., Finish RMS 45 Max, Length 18 In.,...More

  • Category : Flat Stock
Expanded Sheet,Rsd,Al,8 x4 ft,1/2-#0.051
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Expanded Sheet, Rsd, Al, 8 x4 ft, 1/2-#0.051 Expanded Sheet,Rsd,Al,8 x4 ft,1/2-#0.051
  • Item # 5PAW6
  • Mfr. Model # EA3S#051480960102
  • Expanded Sheet, Raised, Aluminum, Mill Finish, Alloy Type 3003, H14 Temper, Length 8 ft., Width 4 ft.,...More

  • Category : Aluminum Expanded Sheets
Carbon Steel Angle Stock, 90° Angle, Low Carbon Alloy&#
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Carbon Steel Angle Stock, 90° Angle, Low Carbon Alloy Type Carbon Steel Angle Stock, 90° Angle, Low Carbon Alloy Type
  • Item # 2AUT6
  • Mfr. Model # 2AUT6
  • Angle Stock, 90 Degrees , Carbon Steel, Alloy Type Low Carbon, Thickness 1/4 In., Leg Length 2-1/2 In.,...More

  • Category : Carbon Steel Angle Stock
Expanded Sheet,Flat,Al,8x4 ft,1/2-#0.051
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Expanded Sheet, Flat, Al, 8x4 ft, 1/2-#0.051 Expanded Sheet,Flat,Al,8x4 ft,1/2-#0.051
  • Item # 5PAV8
  • Mfr. Model # EA3F#051480960102
  • Expanded Sheet, Flat, Aluminum, Mill Finish, Alloy Type 3003, H14 Temper, Length 8 ft., Width 4 ft., Overall...More

  • Category : Aluminum Expanded Sheets
Square Tube,.AL,2 3/4 In Inside Sq,6 ft
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Square Tube, .AL, 2 3/4 In Inside Sq, 6 ft Square Tube,.AL,2 3/4 In Inside Sq,6 ft
  • Item # 6ALN8
  • Mfr. Model # 6ALN8
  • Tubing, Square, Corrosion Resistant, Aluminum, Alloy Type 6063, Outside Square 3", Inside Square 2 3/4", Wall...More

  • Category : Aluminum Square Tube Stock
Plate Stock,SS,304/304L,3/16 x 12 x12 In
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Plate Stock, SS, 304/304L, 3/16 x 12 x12 In Plate Stock,SS,304/304L,3/16 x 12 x12 In
  • Item # 4ZDT5
  • Mfr. Model # 4ZDT5
  • Plate Stock, Corrosion Resistant, Stainless Steel, Alloy Type 304/304L, Thickness 3/16 In, Width 12 In,...More

  • Category : Stainless Steel Blanks, Flats, Bars, Plates, and Sheet Stock
Expanded Sheet,Flat,Stl,8 x 4 ft,1/2-#16
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Expanded Sheet, Flat, Stl, 8 x 4 ft, 1/2-#16 Expanded Sheet,Flat,Stl,8 x 4 ft,1/2-#16
  • Item # 5PAX9
  • Mfr. Model # ECRF#16480960102
  • Expanded Sheet, Flat, Carbon Steel, Mill Finish, Alloy Type 1008, Cold Rolled Temper, Length 8 ft., Width 4...More

  • Category : Carbon Steel Expanded Sheets
Aluminum Corrosion Resistant Rectangular Tubing, Alloy Type 6063
  • TM

    Grainger Choice

  • GRAINGER APPROVED
  • Aluminum Corrosion Resistant Rectangular Tubing, Alloy Type 6063 Aluminum Corrosion Resistant Rectangular Tubing, Alloy Type 6063
  • Item # 6ALU7
  • Mfr. Model # 6ALU7
  • Corrosion Resistant Rectangular Tubing, Aluminum, Alloy Type 6063, 1-3/4 In. x 4 In. Outside Rectangle Size,...More

  • Category : Aluminum Rectangular Tube Stock
Results per page:  16 | 32 | 48
Note: Product availability is real-time basis and adjusted continuously. The product will be reserved for you when you complete your order. More